Quality Management Parameters (qmptc0100m000)

If this check box is selected, the Quality package can be used in the Sales Control module as a basis for inspections.

If this check box is selected, Quality can be used as a basis for inspection, in the Sales Schedule module.

If this check box is selected, the Quality package can be used in the Purchase Control module as a basis for inspections.

If this check box is selected, Quality can be used as a basis for inspection, in the Purchase Schedule module.

If this check box is selected, the Quality package can be used in the Job Shop Control (JSC) module as a basis for inspections.

If this check box is selected, the Quality package can be used in the Bill of Material (BOM) module as a basis for inspections.

If this check box is selected, the Quality package can be used in the Routing module as a basis for inspections.

If this check box is selected, the Quality package can be used for inspections on warehouse transfers.

If this check box is selected, the Quality package can be used for inspections on storage in warehouses.

If this check box is selected, Quality can be used for Projects, as a basis for inspections.

If this check box is selected, Quality can be used for project contract as a basis for inspections.

If this check box is selected, Quality can be used for Production (repetitive) process, as a basis for inspections.

If this check box is selected, Quality can be used for Routing (repetitive) process, as a basis for inspections.

If this check box is selected, the characteristic based acceptable quality level switching functionality is implemented.

If this check box is selected, you can use order-specific inspection data for Sales Control. Even if changes have occurred in the master data after the sales order has been planned, and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected, you can use order-specific inspection data for Sales Schedule. Even if changes have occurred in the master data after the sales schedule has been planned and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected, you can use order-specific inspection data for Purchase Control. Even if changes have occurred in the master data after the purchase order has been planned, and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected,, you can use order-specific inspection data for Project Contract. Even if changes have occurred in the master data after the project contract has been planned and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected, you can use order-specific inspection data for Purchase Schedule. Even if changes have occurred in the master data after the purchase schedule has been planned, and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected, you can use order-specific inspection data for Job Shop Control (JSC). Even if changes have occurred in the master data after the production order has been planned, and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected, you can use order-specific inspection data for Bill of Material (BOM). Even if changes have occurred in the master data after the production order has been planned, and order-specific inspection data does exist, the inspection orders of a specific order will remain the same.

If this check box is selected,, the inspection results are a recommendation for the user; the user can overwrite these results. Else, if this check box is cleared, the inspection results are mandatory; the user cannot overwrite these results

If this check box is selected,, the inspection results are a recommendation for the user; the user can overwrite these results. Else, if this check box is cleared, the inspection results are mandatory; the user cannot overwrite these results.

If this check box is selected, you can use order-specific inspection data for warehouse transfers.

If this check box is selected, you can use order-specific inspection data for Production (repetitive) related processes.

If this check box is selected, you can use order-specific inspection data for Routing (repetitive) related processes.

Displays a check box option to indicate what has to be done with the inspection results:

If this check box is selected, the Quality inspection results must be considered only as a recommendation. If this check box is cleared, the inspection results must be implemented.

Displays a check box option to indicate as to what has to be done with the inspection results:

If this check box is selected, the Quality inspection results must be considered only as a recommendation. If this check box is cleared, the inspection results must be implemented.

Displays a check box option to indicate as to what has to be done with the inspection results:

Displays a check box option to indicate as to what has to be done with the inspection results:

Displays a check box option to indicate as to what has to be done with the inspection results:

Displays a check box to indicate as to what has to be done with the inspection results:

If this check box is selected, the inspection results are a recommendation for the user; the user can overwrite these results. If this check box is cleared, the inspection results are mandatory; the user cannot overwrite these results.

If this check box is selected, the inspection results are a recommendation for the user; the user can overwrite these results. If this check box is cleared, the inspection results are mandatory; the user cannot overwrite these results.

Displays a field that is used to define number groups for inspection order numbering. For each origin (for example, Sales Control or Purchase Control, a different series can be defined.

Displays the position numbers. When inspection order lines are generated in the Inspection Order Lines (qmptc1101m000) session, a position number will be assigned automatically. In this field, you can type the step size by which every new position numbers needs to be raised.

Displays the series of Sales Control orders.

The code of the series used to generate the Sales Schedule Inspection Orders.

Displays the series of Purchase Control orders.

The code of the series used to generate the Purchase Schedule Inspection Orders.

Displays the series of Job Shop Control orders.

Displays the series of Bill of Material orders.

Displays the series of Routing orders.

Displays the series of warehouse inspection orders.

Displays the series of storage inspection orders.

The code of the series used to generate project inspection orders.

The description or name of the code.

The code of the series used to generate project contract inspection orders.

The description or name of the code.

The code of the series used to generate production (RPT) inspection orders.

The description or name of the code.

The code of the series used to generate routing (RPT) inspection orders.

The description or name of the code.

The code of the series used to generate the First Article Inspection document.

The description or name of the code.

Displays a field where you must enter a blocking reason to accomplish a Block on Operation for Active Inspections in the Job Shop Control (JSC) module.

Displays a field where you must enter a blocking reason to accomplish a Block on Operation for Not Active Inspections in Job Shop Control. An inspection is not active when the inspection status is Free with order quantity = 0.

Displays a field where you must enter a blocking reason to accomplish a Block on Operation for Processed Inspections in Job Shop Control. An inspection is processed when the inspection status is Processed.

Displays a field where you must enter a blocking reason to accomplish a Block on Completion of Operation for Active Inspections in the Job Shop Control module.

Displays a field where you must enter a blocking reason to accomplish a Block on Completion of Operation for Not Active Inspections in the Job Shop Control module. An inspection is not active when the inspection status is Free with order quantity = 0, or when the inspection status is Processed.

Displays a parameter that determines how the test data is entered.

If this check box is selected, the Print Inspection Orders (qmptc1400m000) session is mandatory in the inspection procedure. This means that an inspection order is blocked until the documents are printed.

If this check box is selected, user must approve the changes to the sampling rules. If this checkbox is not selected, LN automatically approves the changes to the sampling rules.

The period table used to track the Item Quality statistics.

The code of the rejection reason. The reason for the rejection of the products that are purchased, produced, transferred, or sold.

The description or name of the code.

The description or name of the code.

The option set code that refers to the option set defined in the Option Sets (qmptc0113m000) session. This is used as the default option set on the conformance document register.