Stock Point Blocking (whwmd6130m000)

Use this session to block or unblock stock points stored in a warehouse or a warehouse location. You can unblock these stock points by storage unit and reason for blocking.

Note

To view additional details of a blocked stock point, click the blocked stock point and from the appropriate menu, select Blocked Stock Points to start the Blocked Stock Points (whwmd6550m000) session.

If present for the blocked inventory, you can view and maintain project peg or ownership details in the Blocked Stock Point Details (whwmd6152m000) session, which you can start from the Blocked Stock Points (whwmd6550m000) session.

To block a stock point

  1. In the current session, click New.
  2. Complete one of the following steps:

    • To block the entire stock point, select the Fully Blocked check box.
    • To partially block the stock point, clear the Fully Blocked check box, then enter the Blocked Quantity in Storage Unit fields. If applicable, specify the package definition.

The blocked quantity cannot be more than the difference between the Inventory in Storage Unit and the Process Blocked Quantity in Storage Unit as specified in the Item - Inventory Structure (whinr1550m000) session.

If the blocked stock point is initiated by Quality and serial numbers are specified for which the storage inspection apply, you can view the blocked serial numbers in the Serial Blocking (whwmd6135m000) session. In this case, you cannot change the blocked serial numbers.

Block low volume serials

If you partially block a stock point that consists of low volume serialized items, you can specify the blocked serialized items in the Serial Blocking (whwmd6135m000) session. To start the Serial Blocking (whwmd6135m000) session, in the current session, select the appropriate line and, from the appropriate menu, click Serial Blocking.

Block by Quality

If you create a storage inspection in Quality, LN automatically blocks the stock point or quantity to be inspected. As a result, a record is created in the current session for which the following applies:

  • The Created by QM check box is selected.
  • The Reason for Blocking is the Reason for Storage Inspection as specified in the Warehouse Master Data Parameters (whwmd0100s000) session.
  • You cannot manually unblock the stock point by deleting the record. LN unblocks the stock point when the storage inspection is closed.
Note
  • When you start to block or unblock, your user name and the current date and time are recorded. LN stores this information to prevent other users from (un)blocking these lots.
  • Blocking and unblocking a stock point will affect the inventory data recorded in the Stock Point Inventory (whinr1540m000) session.
Non-Conforming Material Report (NCMR)

You can view the NCMR for a specific stock point using the Report button, only if the Non-Conformance Implemented check box is selected in the Quality Management Parameters (qmptc0100m000) session.

You can view the blocked stock points for a specific warehouse/ location/ item combination. The following sort options are available: Non-Conforming Material Report, Warehouse, Location, Item, Lot, Inventory Date, Reason for Blocking and Sequence.

Unblocking a stock point

To unblock a stock point, select and delete the appropriate line. The setting of the Blocking by User check box in the Warehouse Master Data Parameters (whwmd0100s000) session determines the user authorities for unblocking.

 

Warehouse
A place for storing goods. For each warehouse, you can enter address data and data relating to its type.
Location
A distinct place in a warehouse where goods are stored.

A warehouse can be divided into locations to manage the available space, and to locate the stored goods. Storage conditions and blocks can be applied to individual locations.

Item
The raw materials, subassemblies, finished products, and tools that can be purchased, stored, manufactured, and sold.

An item can also represent a set of items handled as one kit, or which exist in multiple product variants.

You can also define nonphysical items, which are not retained in inventory but can be used to post costs or to invoice services to customers. The examples of nonphysical items:

  • Cost items (for example, electricity)
  • Service items
  • Subcontracting services
  • List items (menus/options)
Lot
A number of items produced and stored together that are identified by a (lot) code. Lots identify goods.
Inventory Date
A date that is assigned to items when they are stored. You can use inventory dates to retrieve items based on FIFO (First In First Out) or LIFO (Last In First Out), without carrying out extensive lot control.

The meaning of the inventory date is connected to the outbound priority of LIFO, FIFO, or the product expiry date of the item.

With outbound priority LIFO or FIFO, the default for the inventory date is the system date; however, you can overwrite this so that the inventory date does not have to be equal to the storage date. If the item has a particular shelf life, the inventory date is the product expiry date defined for the item.

Reason for Blocking
The reason of the blocking. This reason can be linked to a blocking of a zone, location, lot, stock point, or serialized item.
Non-Conforming Material Report
Description
The description related to the non-conforming material report.
User
The logon code of the employee who activates a blocking. Only the user who activates a block can remove it.
Sequence
The sequence number that identifies each block if more than one block applies to the stock point.
Blocking
Fully Blocked
If this check box is selected, the entire stock point is blocked.

If this check box is cleared, the stock point is partially blocked. If the stock point is partially blocked, the Blocked Quantity in Storage Unit fields must be specified.

You can also specify the package definition of the stock point to which the block applies. The blocked quantity is less than or equal to the difference between the Inventory in Storage Unit and the Process Blocked Quantity in Storage Unit as specified in the Item - Inventory Structure (whinr1550m000) session.

Package Definition
The package definition of the stock point to which the block applies.

You can only specify the package definition if the Fully Blocked check box is cleared.

Blocked Quantity in Storage Unit
The blocked quantity of the stock point expressed in storage unit.

You can only specify a blocked quantity if the Fully Blocked check box is cleared.

Unit

You can only specify the storage unit if the Fully Blocked check box is cleared.

Blocked Quantity in Inventory Unit
The blocked quantity of the stock point expressed in inventory unit.
User Name
The name of the user who blocked the inventory for a specific stock point.
Blocking Date
The date and time on which the inventory is blocked for the specific stock point. When the stock point is blocked, LN registers the date.
Non-Conforming Material Report
If this check box is selected, LN indicates that non-conforming material report (NCMR) is created for a blocked stock point.
Note

This is a display field.

Created by QM
If this check box is selected, the block is created by Quality.

If you create a storage inspection in Quality, LN automatically blocks the stock point or quantity to be inspected. As a result, a record is created in the current session, for which the following applies:

  • The current check box is selected.
  • The Reason for Blocking is the Reason for Storage Inspection as specified in the Warehouse Master Data Parameters (whwmd0100s000) session.
  • You cannot manually unblock the stock point by deleting the record. The stock point is unblocked if the storage inspection is closed.

If the blocked stock point is initiated by Quality and serial numbers are specified for which storage inspections apply, you can view the blocked serial numbers in the Serial Blocking (whwmd6135m000) session. In this case you cannot change the blocked serial numbers.

Related topics

Stock Point Inventory
Inventory on Hand
The quantity of inventory on hand available for the stock point.
Blocked
The quantity of the stock point inventory that is blocked.
Inventory Structure
Inventory on Hand
The quantity of inventory on hand available for the inventory structure.
Manually Blocked Quantity in Storage Unit
The quantity of the inventory structure that is manually blocked expressed in storage unit.
Text
If this check box is selected, additional text related to the reason for blocking can be specified.

 

Print Stock Point Blocking
Starts the Print Stock Point Blocking (whwmd6430m000) session. By default, LN starts this session to print the report.