Product Configuration Parameters (tipcf0100m000)

Use this session to set the parameters that control the functioning of the Product Configuration (PCF) module.

In the Product Configuration module, you can define constraints by generic item, or change the descriptions of predefined variables. A number of variables that are predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. Once you saved the parameters, you can no longer change them.

Note

The Constraint Expression tab is only available when the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

 

General
Introduction Date
The date and time that the parameters were changed. The parameters are valid up to the effective date of a more recent parameter setting. The current set has no effective date.
Description
The description of the parameter set. For example, you can indicate why you changed the parameters.
Multilevel PCF Choice Structure
If this check box is selected, product configuration is applied at multiple levels of the generic product structure.

You can use a multi-level question structure for the configuration of product variants. The advantage of using this structure is that product features are linked to the proper generic items, which results in a more modular configuration structure.

The structure also enables LN to include or exclude certain sets of questions during the product configuration process.

Note

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

PCF in Customer's Language
If this check box is selected, the product configurator displays the descriptions of features, options, and constraints in the customer's language. This feature is an important aid for a proper communication with the customer, particularly in the case of telephone sales.

If this check box is cleared, the product configurator displays the descriptions of product features, options and constraint validation messages in the employee language.

Note

The Product Configuration module is language-independent, which means that you can record, for example, the descriptions of product features and options in any language. This is especially of value for the communication with customers and other external relations.

The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

Display Implicit Options
If this check box is selected, implicit option values are visualized by the product configurator. This means you use constraints to determine whether or not certain product features or questions must be filled, and whether a default option value is applicable. With the input of an implicit option value you can also use constraints to indicate whether or not the relevant product feature must be visible during the product configuration process.
Note
  • You can always deviate from the setting by explicitly specifying this in the constraint of the relevant product feature.
  • The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

If this check box is cleared, implicit options are not visualized by the product configurator.

Generate Sales Quotation Texts
If this check box is selected, LN generates sales quotation texts for sales quotations after the product configuration process.
Note

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

Identifying Item Code
This parameter affects the way in which LN generates the item code for the product variant when you run the Generate (Project PCS) Structure for Sales Orders (tdsls4244m000) session in the Project Control module.

If this check box is selected, the customized item code that LN generates in the Project Control module is identical to the generic item code, or to the code generated using the Generic Item - Settings for Data Generation (tipcf3101m000) session.

If this check box is cleared, LN generates a new item code for each product variant. To generate the new item codes, LN adds a sequence number to the generic item code. You can specify the exact position of this sequence number in the Sequence Number of Item Code from Position field and the Sequence Number of Item Code to Position field of the current session.

Note
  • The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.
  • If you generate a project structure for a customized item, you must clear this check box. In that case, the new configured item has no PCS project code as a distinctive feature, so the item code must be distinctive.
  • If a customized item is created in a project that would result in two product variants having the same item code, an error occurs during the generation of the project structure.
Use Standard to Order Item BOM
In the Product Configuration (PCF) module, you sell variants of a certain product. Product is manufactured according to the customer's wishes by selecting components, or subassemblies from a list of predefined features and options. If you configure a generic item in Product Configuration (PCF), the generic bill of material (BOM) is converted to a customized product structure. If a specific configuration is selected often, either on end item or subassembly level, you can create a generic items in the Item Base Data (IBD) module. The parameter determines the use of generic items in the customized product structure. You can use the Generate (Project PCS) Structure for Sales Orders (tdsls4244m000) session to create a customized product structure.

If this check box is selected, generic items may be used as parts of the customized BOM. The generic item must be defined in IBD to be available, the components are selected during the generation of the PCS project.

If this check box is cleared, generic items may be used in the BOM, but all components must have the Customize check box selected in the Items - Ordering (tcibd2100m000) session.

Note

The cases described above concern standard items with an order policy Yes.

If you select during product configuration a standard item with order policy No, this standard item is never customized, so the problem of copying components does not occur.

To use a standard-to-order item multiple times on a PCS project

The use of this Use Standard to Order Item BOM parameter is twofold. The parameter not only concerns the selection of components for standard-to-order items during project generation as described above, it also determines whether a customized standard-to-order subassembly can be used multiple times in a PCS project for different parent items.

If this check box is cleared, two parent items in a specific PCS project cannot have the similar customized standard-to-order subassembly as a component. After a specific subassembly is used in the first parent item, you cannot use a similar subassembly in a second parent item anymore. The reason is that if a subassembly is used in a specific parent item, it receives a product variant number that conflicts with the product variant number of another parent item that requires the subassembly.

If this check box is selected, a similar customized standard-to-order subassembly can be used in several parent items for the same project. The first parent item in which the subassembly is used assigns its product variant number to the subassembly. Despite of this product variant number, the subassembly can be used in other customized product structures, with other product variant numbers.

Note

If this check box is selected, and you change a customized standard-to-order subassembly in one of the parent items, the subassembly is also changed in the other parent items in which the subassembly was used.

Use Standard Item for Configuration
If this check box is selected, you can copy the customized item product structure to the selected standard item configuration in the Copy Customized Product Structure to Standard Structure (tipcs2232m000) session.

If this check box is cleared, the customized item will not be copied to a standard item configuration.

Allow re-use of Configurations
If this check box is selected, and you enter the same generic item with the same options on multiple lines on a sales order, LN will use the same item code on both lines, if that is possible.

If this check box is cleared, and you enter the same generic item with the same options on multiple lines on a sales order, LN uses a different item code for each sales order line. It is not permitted to use the same customized item with different variant codes on multiple order lines.

Note

It is not always possible to use an item code on more than one sales order line. For more information, refer to Multiple sales order lines with identical product configurations

Sequence Number of Item Code from Position
This field indicates from which position in the item code the sequence number is generated. If the item code generated by LN does not uniquely identify a product variant, the product configurator automatically generates a unique code by adding a sequence number to the generated item code.
Note

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

Sequence Number of Item Code to Position
This field indicates to which position in the item code the sequence number is generated. If the item code generated by LN does not uniquely identify a product variant, the product configurator automatically generates a unique code by adding a sequence number to the generated item code.
Note

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

Product Configurator Version
The product configurator version.

The use of the product configurator can be divided in two parts:

  1. Product model definition.
  2. Use of the product model in an operational situation. In the development stage, the constraints must be tested to ensure that no errors are present, so that the model can be used in the operational situation.
Note

you can always switch from one version to another.

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

Interpreter Version

Constraints must be tested to ensure that no errors are present. As a result, during runtime, constraints are continually read in, and interpreted or compiled. The advantage of the Interpreter Version mode is that you can immediately test a generic product model after changes are made to certain constraints, without first having to recompile all constraints. A disadvantage is that the performance of the product configurator is reduced.

Object Version

This version is available for the operational situation. During runtime, constraints are directly executed by the product configurator as objects, without the necessity to repeatedly read in and interpret or compile constraints. Compared to the interpreter version, the object version may result in a considerable performance improvement, especially in the case of more complex constraints. Prior to using the object version, all constraints must be compiled in the Compile Constraints by Configurable Item (tipcf2201m000) session. For this purpose, you need the compiler 'bic6.2' of Enterprise Server.

Performance aspects

The setting of this field could affect system performance and database growth. For more information, refer to Product configurator version.

Number Group for Product Variants
Constraint Source Directory
Before constraints can be compiled, this session first generates constraint sources. These constraint sources are stored in the <path.name>/ppcfcons<company.number> directory of your file system.

Enter the path name of the directory in which you want to store the constraint source. You can enter the full path name or use the current directory as your departure point. In the latter situation, the path name must begin with a period [.].

Note

The system adds the name of the constraint source directory to the path name automatically, but you can also add the name yourself. The next time you use this session, the saved directory is presented as the default. In case no directory has been saved, the $BSE/lib/fd<tools.version>.<packet.combination > file is used to determine the default path.

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

If no directory has been saved, and you are working on a system that has no $BSE/lib/fd<tools version>.<packet.combination> file, you are asked to enter the directory where the sources are to be stored.

Constraint Object Directory
Enter the path name of the directory in which you want to store the constraint objects. You can enter the full path name or use the current directory as your departure point. In the latter situation, the path name must begin with a period and a slash.
Note

The system adds the name of the constraint object directory to the path name automatically, but you can also add the name yourself. If no directory has been saved, the $BSE/lib/fd<tools.version>.<package.combination> file is used to determine the default path.

The check box not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.

If no directory has been saved and you are working on a system that has no file called " $BSE/lib/fd<tools version>.<packet.combination>," you are asked to enter the directory where the objects must be stored.

Constraint Expression
Input Option Value
The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed.

The Input Option Value variable enables you to indicate for each product feature whether or not the product configurator must prompt you to enter an option value.

This variable has the following features:

Constraint sectionBefore Input
ApplicationEnter option value y/n
DomainTrue/false
InitializationTrue

 

Display Option Value
Indicates for each product feature whether the product configurator must display that feature during the product configuration process in case of an implicit option value.

This variable has the following features:

Constraint sectionBefore Input
ApplicationDisplay Option Value y/n
DomainTrue/false
InitializationTrue if the Display Implicit Options parameter is selected
False if the Display Implicit Options parameter is cleared

 

Note

Value is true if the Input Option Value field is true.

Validating
The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed.

This field indicates whether or not the product configurator validates a given product configuration. As a result, you can control the product configuration process and also prevent the configuration or generation of unallowed product variants. Note that product configuration covers all generic product information, such as product features and options, generic item data, generic bills of material, generic routing, and generic price lists.

This variable has the following features:

Constraint sectionValidation
ApplicationValidating product configuration
DomainTrue/false
InitializationTrue

 

Message
The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed.

The Message field enables you to generate messages during the product configuration process. These messages are displayed as warnings, notices, or explanations. Messages can be recorded in constraints in the form of texts or text blocks. When you have chosen product configuration in the customer's language, you can enter message in constraints in any language. Consequently, the product configurator generates and displays the message in the language linked to the customer's language code.

This variable has the following features:

Constraint sectionValidation
ApplicationGenerating messages
DomainAlphanumeric: a maximum of 80x25 lines of text
InitializationStandard message

 

Note

If a message is recorded in a foreign language, the (system) language code must be added to the variable Message.

For example:

  • message = "this is a message"
  • message.3 = "dies ist eine Meldung"
Item Data
The Product Configuration (PCF) module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed.

The data enables you to let the product configurator determine the data of a product variant item, such as item code, item description, material, size, norm, and item text. The variable data can be used in the "parameter substitution" part of a generic item data constraint.

This variable has the following features:

Constraint SectionParameter substitution
ApplicationDetermine product variant item data
DomainAlphabetic characters
InitializationCurrent value of item data

 

Note

Text blocks for item text generation have first priority.

Cycle Time
The Product Configuration (PCF) module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once you have defined product constraints, you can no longer change the descriptions of the variables.

With the variable cycle time you can let the product configurator calculate, for example, the cycle time for an operation, according to a formula.

This variable has the following features:

Constraint sectionParameter Substitution
ApplicationCalculating setup time for operation
DomainFractions
InitializationCurrent value of operation setup time

 

Price
The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed.

With this field you can let the product configurator calculate the purchase or sales price for a product variant, based on, for example, a formula. The final purchase or sales price for a product variant may be composed of multiple price and/or surcharge components. Some data can be recorded in the generic purchase or sales price list for each generic item.

This variable has the following features:

Constraint sectionParameter Substitution
ApplicationCalculating purchase or sales price of product variant
DomainFractions
InitializationCurrent value of purchase price or 0.0 for the sales price