Assembly BOM and Operations (tiapl2520m000)

Use this session to view and maintain the assembly parts, operations, and line stations that are required for a specific engineering module.

 

Engineering Module
The code of the engineering module for which the required assembly parts and operations are displayed in this session.
Revision
The revision of the engineering module.
Position
The position number of the line that contains the flattened assembly parts and operations in the current session.

By default, LN shows the last position number used, plus 10. This procedure provides the sequence 10, 20, 30, and so on. The numbering of positions is unrestricted.

Sequence Number
The sequence number is a subdivision of the position number.

You can use sequence numbers to create a variant of a record, for example with another reference date or exception.

Effective Date
The date on which the displayed information, such as assembly part, quantity, and so on, becomes effective for the selected engineering module.
Note
  • Effectivity overlap is permitted.
  • The Effective Date must fall before the Expiry Date.
  • If an exception is used, the information is effective if both the date range and the exception are valid.
Expiry Date
The date until which the displayed information, such as assembly part, quantity, and so on, is effective for the selected engineering module.
Note
  • Effectivity overlap is permitted.
  • The Effective Date must fall before the Expiry Date.
  • If an exception is used, the information is effective if both the date range and the exception are valid.
Assembly Part
The assembly part that is used for the selected engineering module.

The following conditions apply to the assembly part:

  • The Item Type must be Manufactured or Purchased
  • The item planning data must be present. Refer to the Items - Planning (cprpd1100m000) session for information about this data.

If you leave this field empty, the operation is not linked to a specific assembly part.

Note

Assembly BOM

  • You can select non-configurable items only for an assembly BOM.

  • You can select non-configurable items only on a BOM line.

Net Quantity
The number of assembly parts required for the selected module.
Note

Zero is not allowed

Operation
The code of the operation required in the selected engineering module.
Revision
The revision of the assembly part.
Link with EDM
If this check box is selected, the assembly BOM is linked to an engineering BOM.
Text
If this check box is selected, a text is present for this BOM line.