Опции редактора текстов (tttxt2100m000)

If the cursor is already at that position, the visible text is scrolled up one screen.

If the cursor is already at that position, the text is scrolled down one screen, if possible.

If the line number entered is greater than the total number of lines in the file, the cursor is placed on the last line of the file.

The line number and column number are shown on the last line of the screen.

The current first line of the screen becomes the last line of the screen. The cursor is placed on the first line of the new screen.

The current last line on the screen becomes the first line of the screen. The cursor is placed on the last line of the new screen.

Specify the text to be replaced and the new text. Next, you can indicate if you want to confirm each replacement. All lines from the current line to the last line of the file are checked for the text that must be replaced. If you want to confirm replacements, Tools asks if the text must be replaced each time the text is found. If you answer no, you must also indicate whether you want to continue or not.

You must select the first and last characters of the block to be flushed with the mark options.

All characters on the current line to the right of the cursor are moved one position to the left.

If the cursor is placed on a separator, only the separator is deleted. Characters on the rest of the line are moved to the left.

The cursor position is not changed. The character at the position of the cursor and all characters to the right of the cursor are moved one position.

The current line and the lines below the current line are moved downwards a specified number of lines. The user must specify the desired number of lines to be inserted.

You must select the block with the mark options. After that you must confirm that you want to delete the text block. This action can be canceled by pressing <Esc> q.

The cursor is placed at the first position on the new line. All lines from the current line to the last one on the screen are scrolled downwards one line.

All characters to the right of the current cursor position are deleted.

The line or part of a line reappears at the same position where it was deleted. This can only be done for lines which were deleted with the Delete Rest of Line option.

You must select the first and last characters of the block to be moved with the mark options. After that, a start select should be entered at the new position.

You must select the first and last characters of the block to be copied with the mark options. Next, a start select must be entered at the new position.

All lines following the line next to the current one are moved up one line. If the next line takes more space than is available on the current line, no changes are made.

All characters from the current cursor position to the end of the line are moved to a new line created below the current one. The cursor is placed at the first position of the new line.

The editor is restarted with the last saved text, or as at startup if the text was not saved.

If the text editor is started in a text field, a link is made between that text field and the text number. With this command the link is removed. After you issue the command, you must confirm the removal of the link.

A window appears in which you can select the required language.

The language is changed to the language you have copied the text to.

By default, the file is read from the current directory. If another directory is required, the whole path must be specified.

The Обзор текстов (tttxt1500s000) session is started to select a text from the Text manager.

The Обзор текстов (tttxt1500s000) session is started to select a text.

The file name can be entered with the whole path. Otherwise, the file is created in the current directory.

The Печать текстов (tttxt1400s000) session is started to select the texts to be printed. The texts can be sent to a file, a printer, or to the screen.

Before the editor is canceled, Tools requires confirmation of the action.

If the insert mode is on, the string is displayed in the status bar. In insert mode all typed characters are placed before the cursor and the characters following the cursor are moved one position to the right.

When the insert mode is off, characters are overwritten.

If the graphic mode is on, the string is displayed in the status bar. In the graphic mode, the keys 1-9, -, and | can be used to draw a box.

Tools searches for the defined string from the current cursor position to the last character at the last line. The cursor is placed on the position where the string is found. If the string is not found, the cursor is placed at the end of the text.

If a block must be selected, a message is displayed on the message line with the selection options that can be used.

If the text is not found after the current cursor position, the cursor is placed at the end of the text.

If marking a block is required, a message is displayed on the message line with the select options that can be used.

You can select an option by typing the first character or by pressing the spacebar and selecting an option. After you choose a part of the text, the start column and end column must be specified. The start column indicates the position where each line starts. The end column indicates the last possible end position of each line.

When you are required to enter the start and end columns you can cancel the format action by pressing <Esc>.

Tools formats text by removing all superfluous spaces from a text between the cursor position and the first blank line, and placing as many words on one line as possible between the start and end column.

You can select an option by typing the first character or by pressing the spacebar and selecting an option.

After you choose a part of the text, the start column and end column must be specified. The start column indicates the position where each line starts. The end column indicates the last possible end position of each line.

When you are required to enter the start column and end column you can cancel the format action by pressing <Esc>.

Tools formats text by removing all superfluous spaces from a text between the cursor position and the first blank line, and placing as many words on one line as possible between the start column and end column. If the lines do not fill the whole line, the remaining space is distributed over the line by inserting spaces between the words.

The default number is 8. After you enter the number, all tab stops are removed and new tab stops are created.

If the text is a Help text, this option can be used to zoom to a submenu, to display messages, sessions, labels, and so on. By using this option you can call the message code, session code, and so on, which will be displayed in the text editor. If you edit text in another way, a specific zoom session is started.

Place the cursor on the hypertext code and press this special key combination and character to display the description on the bottom line.

The command must be entered on the last line of the screen. After the command has been executed, press a key.