| | Items - PlanningUse this session to list plan items, and to maintain and modify the related
settings. Performance aspects The settings in this session could affect system performance and database growth. For more information, refer to Number of plan items. Plan Item Plan Item An item with the order system Planned. The production, distribution, or purchase of these items is
planned in Enterprise Planning based on the forecast or the actual demand. You can plan these items by means of the following: - Master-based planning, which is similar to master production
scheduling techniques.
- Order-based planning, which is similar to
material-requirements planning techniques.
- A combination of master-based planning and order-based
planning.
Plan items can be one of the following: - An actual manufactured or purchased item.
- A product family.
- A basic model, that is, a defined product variant of a
generic item.
A group of similar plan items or families is called a product
family. The items are aggregated to give a more general plan than the one
devised for individual items. A code displayed by the item code's cluster
segment shows that the plan item is a clustered item that is used for
distribution planning. General General Data Plan Item Type The type of plan item. Note All plan items must first be defined as an item in Common, even if it
concerns a plan item of type Family. Plan Level The level within a hierarchical planning structure. When you plan on a higher plan level, plans are general and
less detailed. Example Plan level 1 is the highest plan level; the higher the
number, the lower the plan level. Default Supply Source The default supply source of a plan item, which can be Production/Purchase or Distribution. LN uses the value of the Default Supply Source field if it can find no valid sourcing strategy for the
plan item. If you set the Default Supply Source field to Production/Purchase, LN takes into account the
date effective item type that you defined in the Date-Effective Item Data (tcibd0510m000) session. Actual Supply Source The time-dependent supply source. The actual value depends
on the date effectivity line of the current moment of the item type that you
defined in the Date-Effective Item Data (tcibd0510m000) session. Default Warehouse The warehouse from and to which the item is normally
delivered. Allowed values For a non-clustered item this must
be a warehouse in the item's logistical site. The warehouse of a clustered item must belong
to the item's cluster. Calendar of Default EU The calendar of the enterprise unit that you
specified in the session for the default warehouse. LN uses the enterprise unit calendar for several planning aspects
that are not related to a particular resource, business partner, or warehouse. LN uses the enterprise unit calendar when a more specific calendar is not
available. Planner The employee or department responsible for planning the
production, purchase and distribution of items. The planner takes into account
the inventory levels, availability of materials, and capacities of resources,
and reacts on signals such as rescheduling messages that LN generates. If this field is empty, no planner in particular is
responsible for this plan item. Planner The name of the planner that belongs to the code in the Planner field. Fixed Delivery Type The fixed-delivery code for this plan item. If the actual source corresponds with the supply source
for which the fixed delivery code is valid, Enterprise Planning generates planned orders for the item. In this case, the finish
date equals a fixed-delivery date. You can link a fixed-delivery types to a pattern in the Fixed Delivery Codes (cprpd2110m000) session. Note If this field is empty, fixed delivery is not used for
this item. VMI Relation The function of this plan item in a vendor managed inventory (VMI) setup. This field
determines what VMI-related actions LN must perform during an order-based planning run. Note Every time you run order-based planning, LN reevaluates the VMI Relation field. LN takes the entire period between current date and the planning horizon into account. If at any time in that
period an applicable terms and conditions agreement is found, the VMI Relation field is set to Create Supplier Forecast or Receive Customer Forecast, even if this terms and
conditions agreement is not effective at the current date. In this way, LN makes sure that the order-based planning run executes the VMI-functionality
if it is needed. General Parameters Maintain Master Plan If this check box is selected, Enterprise Planning maintains an item master plan for the
item. If this check box is selected, Enterprise Planning also
maintains a channel master plan for
every channel that you linked to the specified plan item in the Plan Item - Channels (cpdsp5100m000) session. A master plan allows the use of various functions, see: To use master plans. Note - If an item master plan is maintained, you can still
also use order-based planning.
- If this check box is cleared, the above-mentioned
functions are not available. Order-based planning is the only available
planning system for this item.
- You must only maintain a master plan for an item if you
need the described functionality, because it can decrease performance.
- If the VMI Relation field is Create Supplier Forecast or Receive Customer Forecast, you cannot maintain an item
master plan for this item.
This check must be cleared when using Mandatory Project Peg in Items - General (tcibd0501m000) Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Maintain master plan. Dependent Demand Forecast If this check box is selected, the calculation of the
demand forecast is based on the historical demand data of both the dependent demand and the independent demand. If this check box is cleared, the calculation and
consumption of the demand forecast is based on the independent demand only. If the calculation of the demand forecast takes the
dependent demand into account, the forecast is also consumed by dependent
demand. Central Multi Site Planning If this check box is selected, the item can be planned
in a central multisite planning run. If you clear the Multisite Planning check box in the Planning Parameters (cprpd0100m000) session, this check box is not available. Exclude from Pegging If this check box is selected, LN generates no pegging information for this plan item. Performance aspects If this check box is cleared, The setting of this field could affect system performance and database growth. Inventory Inventory on Hand The physical quantity of goods in one or more warehouses
(including the inventory on hold). Inventory on Hand The unit in which LN manages physical
quantities of the item. Safety Stock The buffer inventory necessary to meet fluctuations in demand
and delivery lead time. In general, safety stock is a quantity of inventory
planned to be in inventory to protect against fluctuations in demand or supply.
In the context of master production scheduling, safety stock is the additional
inventory and capacity planned as protection against forecast errors and
short-term changes in the backlog. Safety Stock The unit in which LN manages physical
quantities of the item. Plan Item Text If this check box is selected, a text is present. Horizons Time Fences Time Fence The date until which an item's supply plan and planned orders
are frozen. The time fence is expressed as a number of working days or
working hours from the date you carry out the simulation. As a rule, Enterprise Planning does not regenerate the supply
plan or the planned orders within the time fence. However, you can overrule
this behavior when you run a master-plan simulation or order simulation. The time fence is meant to prevent: - Disturbance of orders that have already started (at the
shop-floor level).
- Generation of planned orders with start dates in the past
(that is, orders that are late).
Usually, the lead time of an item's production process is a
reasonable value for the time fence. You can override the time fence for master-based
planning by selecting the Generate Within Time Fence check box in the Generate Master Planning (cprmp1202m000) session. You can override the time fence for order-based
planning by selecting the Generate Within Time Fence check box in the Generate Order Planning (cprrp1210m000) session. Note Although you can define a time fence for purchase
schedule items, LN does
not take into account the Time Fence field. For the firm part of purchase
schedules, LN uses a frozen period. For more information about purchase
schedules and time fences, see Purchase schedules and Enterprise Planning. Time Fence Select Hours or Days as time
unit for the time fence. Note If you select Hours, LN sets the time fence by
taking into account the workable hours, starting from the time point on which LN generates the order
planning, and by adding up the value you define in the Time Fence field. Suppose you set the time fence to 7 hours, and the
working hours for every day of the week are from 8:00 am to 17:00 pm. If LN generates the order
planning on Wednesday, 13:00 pm, it sets the time fence to Thursday, 11:00
am. Time Fence The date on which LN sets the time fence. To find the correct date, LN starts from the
current date, and stops after the number of workdays that you defined in
the Time Fence field. Use Time Fence Use this check box to indicate whether or not you want to
use the specified time fence to plan an
individual item. If this check box is selected, Enterprise Planning uses the
time fence according to the setting of the Generate Within Time Fence in the Generate Order Planning (cprrp1210m000) session to plan orders for an individual
item. For example, when you select zero as time fence and you
have a sales demand for yesterday, the planned finish date of the planned order
is today, because Enterprise Planning cannot plan in the past. If this check box is cleared, Enterprise Planning ignores
the time fence you defined for the current scenario. In this way you can
overrule the setting of the Generate Within Time Fence check box in the Generate Order Planning (cprrp1210m000) session. Dependent on the settings of both the Generate Within Time Fence check box and the Use Time Fence check box, three situation exist: - If you clear the Use Time Fence check box, LN plans within the time fence, and does not
take into account the settings of the Generate Within Time Fence check box in the Generate Order Planning (cprrp1210m000) session.
- If you select
the Use Time Fence check box, and you clear the Generate Within Time Fence check box, LN plans outside the time fence.
- If you select
the Use Time Fence check box, as well as the Generate Within Time Fence check box, LN plans within the time fence.
For example, you have a sales demand for yesterday and
you disable the time fence field. Enterprise Planning plans the finish date of the
planned order for yesterday, because Enterprise Planning can plan in the past in that
situation. Forecast Time Fence The date up until which Enterprise Planning ignores
the demand forecast when generating master plans and planned orders. In the
first few days after the current date, LN expects to receive
no more sales orders than the actual sales orders that you already
received. The forecast time fence is expressed as a number of
working days from the date you carry out the planning. Before the forecast time fence, Enterprise Planning only
considers actual customer orders. Beyond the forecast time fence, total demand
is a combination of actual orders and forecasts. A reasonable value for the forecast time fence is the
minimum time period between the receipt of customer orders and the requested
delivery dates. To calculate the forecast time fence, LN uses the calendar
that you specified for the enterprise unit of the plan item's default
warehouse. If you did not specify an enterprise unit for the
default warehouse of the plan item, Enterprise Planning uses the company calendar to
calculate the forecast time fence. Date The date on which LN sets the forecast time fence. To find the correct date, LN starts from the
current date, and stops after the number of workdays that you defined in
the Forecast Time Fence field. Order Horizon The time period for which Enterprise Planning uses
order-based planning to plan supply. The order horizon is expressed as a number of working days
from the date you carry out the simulation. If the order horizon is zero, Enterprise Planning does not
use order-based planning for the item involved. To calculate the order horizon, LN uses the calendar that
you specified for the enterprise unit of the default warehouse to which the
plan item belongs. If you did not specify an enterprise unit for the default warehouse of the plan
item, Enterprise Planning uses the company calendar to calculate the order horizon. Note LN moves
the order horizon towards the end of the plan period) in which it falls, because Enterprise Planning must know whether a plan period falls within the order horizon. LN automatically updates the order horizon when
you run the Check Horizons (cprpd1200m000) session, if the following conditions are
met: - The Automate Update Horizons check box is selected.
- The Update Method in the Check Horizons (cprpd1200m000) session is set to COLT + Horizons When Too Small, or to COLT + All Horizons.
If you set the Update Method field
in the Check Horizons (cprpd1200m000) session to COLT + Horizons When Too Small, LN corrects the order horizon when it is too
short to correctly create planned orders. If you set the Update Method field
in the Check Horizons (cprpd1200m000) session to COLT + All Horizons, LN corrects the order horizon, regardless of the value in the Minimum Order Horizon field. Date The date on which LN sets the order horizon. To find the correct date, LN starts from the
current date, and stops after the number of workdays that you defined in
the Order Horizon field. LN takes into account the actual calendar for the enterprise unit calendar of
the item's warehouse and the default availability type that you
defined in the Planning Parameters (cprpd0100m000) session. Planning Horizon The time period for which LN maintains planning
data for an item. The planning horizon is expressed as a number of working days
from the date you carry out the simulation. Enterprise Planning does not generate supply plans or planned orders beyond an
item's planning horizon. To calculate the planning horizon, Enterprise Planning uses the
calendar that you specified for the enterprise unit of the default warehouse to
which the plan item belongs. Note Enterprise Planning moves the planning horizon to the end of the plan period in
which it falls. LN automatically updates the planning horizon when you
run the Check Horizons (cprpd1200m000) session, if the following conditions are met: - The Automate Update Horizons check box is selected.
- The Update Method field
in the Check Horizons (cprpd1200m000) session is set to COLT + Horizons When Too Small, or to COLT + All Horizons.
If you set the Update Method field
in the Check Horizons (cprpd1200m000) session to COLT + Horizons When Too Small, corrects the planning horizon when it is too
short to correctly create an order plan. If you set the Update Method field
in the Check Horizons (cprpd1200m000) session to COLT + All Horizons, LN corrects the planning horizon, regardless of the value in the Minimum Planning Horizon field. Date The date on which LN sets the planning horizon. To find the correct date, LN starts from the
current date, and stops after the number of workdays that you defined in
the Planning Horizon field, which is comparable to the way that LN finds the correct date
of the order horizon. Order Lead Times Safety Time The safety time defined in the Item - Ordering (tcibd2100s000) session. The safety time is expressed in hours or in
days. Order Lead Time Depending on the Actual Supply Source the
order lead time for the planned item is determined as follows. If the plan item's Actual Supply Source is: Production The order lead time specified in
the Items - Production (tiipd0101m000) session is displayed in this field. This
lead time is used for planned production orders within the fixed lead-time horizon. Purchase LN determines if any of the suppliers in the Item - Purchase Business Partner (tdipu0110m000) session is specified as Single Source for the plan item. If several lead times are present for the
plan item, the first that matches the actual scenario dates is
selected. If no Single Source supplier is present, LN selects a supplier rom the Approved suppliers list in the Item - Purchase Business Partner (tdipu0110m000) session. The selected supplier must be
effective for the actual scenario dates of the planned item. The selected
supplier must be Preferred. If several suppliers fit the specifications,
the supplier with the highest Calculated Lead Time (Days) is selected. If the first two options are not available, the Supply Time from the Items - Purchase (tdipu0101m000) session is taken.
Repetitive Subcontract Distribution
Note To view the breakdown of the components for the selected
lead time you can zoom to the Lead-Time Analysis (cprrp1150m000) session. The order lead time is expressed in days or in
hours. Inbound Lead Time The time interval between the arrival of the items and the
actual storage in the warehouse. Extra Lead Time Time reserved for extra activities that are necessary to fully
complete a planned order. Enterprise Planning treats the extra lead time in the same way as the safety
time: the order must be delivered earlier based on the extra lead
time. The extra lead time is expressed in days or in
hours. If the lead - time is set to 0 it will not taken in to
account during order planning. Start of Fixed Lead-Time Horizon (SFC) The number of workdays after which the fixed lead-time horizon starts. Note The start of the fixed lead-time horizon is rounded to
the end of a plan period. Effectively,
this means that the fixed lead-time horizon starts at the next plan period. If the value of this field is greater than the order horizon, this
effectively means that no fixed lead-time horizon is used. Important! If the Start of Fixed Lead-Time Horizon (SFC) field is zero, you cannot transfer
the generated planned orders to the execution level, because Enterprise Planning links no
routing operations to the planned order. You can use this setting only for
simulations. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Start of fixed lead-time horizon. Available to Transfer Use Available to Transfer Lead Time If this check box is selected, non-excess cost pegged supply may be
transferred to a demand with a higher priority. New supply is raised to fulfill
the demand of the original cost peg. Note Non-excess transfer is for inventory and scheduled
supply. If a multiplier is applied to the minimum planning
horizon you can determine the actual planning horizon. COLT COLT The cumulative order lead time (COLT) for this plan item. - When calculating the purchase item lead time, the Supply Time from the Items - Purchase Business Partner (tdipu0110m000) session is taken into account.
- When you run the Check Horizons (cprpd1200m000) session, LN automatically updates this field.
Full Cumulative Order Lead Time The full cumulative order lead time (COLT) for this plan item if it must be produced or purchased
outside the forecast. - This field is only visible if the Use Full Supply Time check box is selected in the Purchase Parameters (tdpur0100m000) session.
- When calculating the purchase item lead time, the Full Supply Time from the Items - Purchase Business Partner (tdipu0110m000) session is taken into account.
- When you run the Check Horizons (cprpd1200m000) session, LN automatically updates this field.
Full Non-Critical COLT The full non-critical cumulative order lead time (non-critical COLT) for this plan item if it
must be produced or purchased outside the forecast. - This field is only visible if the Use Full Supply Time check box is selected in the Purchase Parameters (tdpur0100m000) session.
- When calculating the purchase item lead time, the Full Supply Time from the Items - Purchase Business Partner (tdipu0110m000) session is taken into account.
- When you run the Check Horizons (cprpd1200m000) session, LN automatically updates this field.
Minimum Order Horizon The time period for which Enterprise Planning uses
order-based planning to plan supply. The order horizon is expressed as a number of working days
from the date you carry out the simulation. If the order horizon is zero, Enterprise Planning does not
use order-based planning for the item involved. To calculate the order horizon, LN uses the calendar that
you specified for the enterprise unit of the default warehouse to which the
plan item belongs. If you did not specify an enterprise unit for the default warehouse of the plan
item, Enterprise Planning uses the company calendar to calculate the order horizon. Note LN moves
the order horizon towards the end of the plan period) in which it falls, because Enterprise Planning must know whether a plan period falls within the order horizon. LN automatically updates the value of the Minimum Order Horizon field when you run the Check Horizons (cprpd1200m000) session, if you selected the Automate Update Horizons check box. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Order horizon. Minimum Planning Horizon The time period for which LN maintains planning
data for an item. The planning horizon is expressed as a number of working days
from the date you carry out the simulation. Enterprise Planning does not generate supply plans or planned orders beyond an
item's planning horizon. To calculate the planning horizon, Enterprise Planning uses the
calendar that you specified for the enterprise unit of the default warehouse to
which the plan item belongs. Note Enterprise Planning moves the planning horizon to the end of the plan period in
which it falls. LN automatically updates the value of the Minimum Planning Horizon field when you run the Check Horizons (cprpd1200m000) session, if you selected the Automate Update Horizons check box. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Planning horizon. Automate Update Horizons If this check box is selected, LN automatically updates the order horizon and/or the planning horizon when you
run the Check Horizons (cprpd1200m000) session. Master Plan Automatic Update Production Plan Select one of the four update modes. Purchase Plan Select one of the four update modes. Inventory Plan Select one of the four update modes. Demand Forecast Select one of the four update modes. Planning Forecast-Based Generation Method If this check box is selected, the inventory plan is generated
on the basis of the expected demand of the plan item during a certain forecast horizon. If this check box is cleared, the inventory plan is
generated on the basis of the safety stock level and the seasonal pattern. Forecast Horizon If this check box is selected, the inventory plan is generated
on the basis of the expected demand of the plan item during a certain forecast horizon. If this check box is cleared, the inventory plan is
generated on the basis of the safety stock level and the seasonal pattern. Work Load Control Constraint If this check box is selected, the availability of the
plan item is a constraint in the planning. This field is only used in the Workload Control master planning method. Note - You can also select the Constraint check box for clustered items to plan them
with the Workload Control master-planning method.
- If the plan item involved is present in more than one
cluster, you can only have a production plan in one cluster, because the
warehouse specified in the BOM/BCM determines from which warehouse Enterprise Planning retrieves the components for the plan item involved. For a production plan for
item X in cluster 1 and a production plan for item X in cluster 2, LN uses the same BCM
warehouse: either in cluster 1 or in cluster 2.
Master Plan Unit The plan unit for master planning. With a master plan unit you can choose a master
planning engine for an item. Note You do not have to enter a plan unit in this field in
the following cases: - The item is planned with infinite planning (not taking
any constraints into account).
- The item does not have a master plan (the Maintain Master Plan check box is cleared).
- All supply is planned by order planning (the order
horizon has the same length as the planning horizon).
- No production plan is generated, in other words, the Production Plan field has the value No Update or (Dis)aggregate.
Priority Specify the appropriate level of priority if you selected
the Constraint check box. Enterprise Planning takes into account the priority of a plan item if you use the
workload control as master-planning engine, and you selected Yes or Only in
the Consider Item Priority field of the Work Load Control Parameters (cpwlc2101m000) session. CTP CTP Parameters Online ATP Update If this check box is selected, LN updates the ATP for a plan item online
if a planned or actual inventory transaction is recorded for the plan item. Note Online ATP updates require processing power and,
therefore, performance. You must only use online ATP updates for: - Items for which the CTP is checked online
- Items for which the CTP is used during distribution
planning
- Business processes that require up-to-date ATP figures
Note If you use ATP functionality for an item that has no
master plan, no online ATP updates are required. In this case, the ATP is
always computed online. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Online ATP update. Critical in CTP A plan item that is critical in CTP must be checked during a
component CTP check for a higher level item in the bill of critical materials.
A resource that is critical in CTP must be checked during a capacity CTP check
for a plan item, if this resource is included in the plan item's bill of
critical capacities. Note The performance, specifically the speed, of the
component CTP check is greatly influenced by the number of components that are
checked. The best approach is to have only the most important components
checked. Capacity CTP If this check box is selected, LN can carry out capacity CTP checks for this item. During an ATP check, LN can check the
availability of critical resource capacity for additional production. LN only performs a CTP
check if the sales order quantity or the quantity you entered in the ATP Handling (cprrp4800m000) session is higher than the item's ATP in the item master plan, and the
required quantity cannot be fulfilled by the ATP alone. The choice of resource to check depends partly on the order horizon: LN checks the capacity of only the resources for which you selected the Critical in CTP check box in the Resource (cprpd2100m000) session. LN cannot carry out capacity CTP checks if the resource has no resource master plan. If LN checked a sales order for capacity CTP, and
accepts and records the sales order in Sales Control, LN carries out a capacity CTP reservation on the critical resources so
that the resource capacity cannot be given away again. Channel ATP If this check box is selected, LN can carry out channel ATP checks for this item. CTP Time Fence The number of working days from the current moment, during
which LN does not
perform CTP checks. The CTP time fence must be smaller than the ATP/CTP
horizon. During the period of the CTP time fence, CTP is considered to
be zero. LN performs CTP checks between the end of the CTP time fence and the end of the
ATP/CTP horizon. After the CTP horizon, LN assumes that capacity
and components are infinite. However, LN does perform ATP checks between the current
moment and the end of the CTP time fence and the end of the ATP/CTP horizon. CTP Horizon The date until which LN performs ATP and CTP checks. The ATP horizon is expressed as a number of working days
during which LN can carry
out ATP and CTP checks. Beyond the ATP/CTP horizon, LN does not check ATP or
CTP: all customer orders are accepted. After the ATP/CTP horizon, LN assumes that capacity
and components are infinite. Important! If you defined this plan item as a alternative material, the value of this field must be
greater than the Alternative Materials Horizon in the Scenarios (cprpd4100m000) session. Otherwise, LN erroneously assumes
that the alternative material is infinitely available to cover for shortages of
the standard material. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to CTP horizon. Family CTP Parameters Family Item CTP If this check box is selected, LN can carry out family CTP checks for this item. Family Site The family site in which you
defined the family item that LN takes into account to perform a family ctp
check. Allowed values The site must have been defined
in the current company. Family Item The family item denotes the item to which the CTP check can
be redirected. Allowed values The item must have been defined in the family site. The family item can be an item that you defined in
another logistical site. Start of Family CTP Horizon The number of workdays after which the family CTP horizon starts. Note The start of the family CTP horizon is rounded to the
end of a plan period. As a result,
the family CTP horizon effectively starts at the next plan period. Net Change Phase Numbers Master Phase Number Parent This field contains the maximum master phase number of any of the
parents of the item in one of the following relationships: BCM or Supplying relationships. If the value of the Master Phase Number field is smaller or equal to the value of the Master Phase Number Parent field, the master phase number must be recomputed. You can recompute phase numbers by means of the Compute Phase Numbers (cprpd6200m000) session. Order Phase Number Parent This field contains the maximum order phase number of any of the
parents of the item in one of the following relationships: BOM or supplying relationships. Default value The default value is -1. If the value of the Order Phase Number field is smaller or equal to the value of the Order Phase Number Parent field, the phase number must be recomputed. Net Change Net Change If this check box is selected, a change occurred that
affects one or both of the following plans: Net Change Date The date on which something changes that affects the current
master plan or the current planned orders. For example, a higher demand or a
change in a BOM. When a net-change simulation is performed, then items are
selected based on the net-change date and flag. For example, when the flag is
set and the date is outside the order horizon, then the item is
skipped. Pegging Net Change If this check box is selected, this plan item must be
included in the next net-change pegging update, because the plan item has
changed since the previous pegging update. Exclude from Pegging If this check box is selected, the planned item is excluded from
pegging. Note This checkbox is disabled if the plan item is a project
pegged item. | |
![[...]](../images/tr_graph_tiglossary_01.gif)