| b
[[source] line_number] | Toggle a break point on the current line or specified
line of the current source or specified source. When the break point is set,
the line is highlighted. You cannot set break points in included parts in a
source. The break point must be set in the included file. |
| B [source] | Display all set break points in the current source or
specified source. |
| c [number] | Continue (execute the source) up to the next break
point. If you specify a number, the debugger skips that number of break points.
The executed source lines are not displayed. |
| CC [number] | Same as 'c', but the executed source lines are
displayed. |
| cc | Change the size of the command window. This is valid
only when application and debugger are in the same window. |
| cs | Change the size of the source window. This is valid
only when the application and debugger are in the same window. |
| d [source line_number] | Delete the break point on the specified line number in
the source. If you do not specify a line number, the debugger provides the
opportunity to interactively delete any break point in the current source file. |
| D [source] | Delete all set break points in the specified source or
current source. |
| delete all | Delete all traces and stop instructions. |
| delete number | Delete a specified trace or stop instruction. |
| ds | Delete the source window. |
| dd | Generate a dump of the data dictionary. |
| <expression> | Execute the specified expression. |
| f [noarg|noname][number] | Display stack trace (present nesting of functions) with
the arguments of the functions. If you specify a number, only that number of
nestings is displayed. | noarg | Only the names of
functions are displayed. | | noname | Arguments are
displayed but not their
names. |
|
| fdebug | Show the open tables on the command window. |
| Fdebug | Print the open tables to the spooler. |
| g [source] line_number | Continue program execution at the specified line number
(goto). |
| help (or ?) | Display the help for debugger options. |
| l | Display the full list of program variables. |
| L | Display the list of program variables that have a
value, and display their current values. To stop displaying the contents of an
array, enter 'n' at the question 'More ?'. |
| lp | Print the output of the 'l' command. |
| Lp | Print the output of the 'L' command. |
| mem | Generate a dump that includes information about the
memory allocated. |
| p | Go to the source line that is currently being processed
(this is, useful after the view command or seek command). The line is indicated
by a greater than sign (>) before the line number. |
| q | Exit the debugger (quit). |
| return | Continue execution until the end of the current
function. |
| s [number] | Execute the program step by step, the specified number
of instructions at a time (default is 1). During execution, the intermediate
source lines are not displayed. |
| S [number] | Similar to 's', but a function call is executed as a
single statement. |
| slow [number] | Reduce the rate of running source code. The maximum
number is 100. The minimum (and default) number is 0. |
| split number | Split the command and source window. The specified
number is the last line of the command window. This is often used after
resizing the Debugger window. |
| status [trace|stop|number] | Display traced variables or stop instructions, or both.
If you specify a number, only that traced variable or stop instruction is
displayed. |
| stop if <expression> | Stop execution when expression is True. |
| stop in <function> | Stop execution when function is entered. |
| sym | Generate a dump of the symbol table. |
| trap off | Disables 'trap on'. This command is available only when
the bshell was started with the -dbgcpu flag. |
| trap on | The debugger stops after execution of every function
call. This command is available only when the bshell was started with the
-dbgcpu flag. |
| swin off | Hide the separate window for stack, array, and long
string. |
| swin on | Display a separate window for stack, array, and long
string in the debugger. |
| t variable | Trace the specified variable during program execution.
The execution of the program stops whenever the value of the variable is
changed. You cannot trace array variables or common variables. |
| T variable [value] | Same as 't', but program execution is not stopped when
the variable changes. If you specify a value, execution stops when the variable
gets that value. |
| u [variable] | Stop tracing the specified variable. If no variable is
specified, you can stop tracing each variable interactively. |
| U | Stop tracing all variables that are currently being
traced. |
| v [source] line_number | Display a specified source line in the source window
(view). If the specified line number is greater than the total number of lines,
the last line is displayed. |
| v {+-} number | Shift the display to the source line that is 'number'
lines before or after the current source line. |
| /pattern | Seek a matching text pattern in the current source and
display that line. |
| [function.]variable [/option] | Display the value of a specified variable. If you
specify a function, the value of the local variable of that function is
displayed. Otherwise, the value of the variable of the current function or the
global variable is displayed. If a variable has no value (empty string or zero
number), the value is not displayed. / option can have the following values: | / | Display the value of a variable that has the
same name as a Debugger command. For example, 'b/' displays the value of
variable b. | | /d | Print the flags of the variable and the
dimension for arrays. | | /D | Display the number of bytes allocated in a long
variable or double variable. Display the number of bytes for one element in a
string array. | | /g | For a string that contains the compact string
representation of a UUID, display the standard string representation of the
UUID. For information, see "UUID overview" in the ERP Enterprise (LN) Programmer's Guide. | | The following options are useful for record
buffers and binary data, and display the value of a string variable with its
full declared length, regardless of NULL characters. | | /x | NULL characters are displayed as
'^@'. | | /X | Characters with values 0 to 31 are displayed as
'\x<value in hex>'. | | /b | All characters are displayed as ' \x<value
in hex>'. | | /l | Interpret field as UTC field, print in local
time and print current time zone. | | /u | Interpret field as UTC field and print in utc
time. |
|
| variable :=
value | Assign a value to a variable. The value can
be: - A string constant or expression.
- A numeric constant or expression.
- A variable name.
|
| vi | Activate the vi editor for the current source at the
current source line. Changing the source has no influence on the source that is
displayed by the debugger in the source window. |
| width value | Change the width of command and source window. You can
specify a value between 80–132. |
| <Ctrl>D/<Ctrl>U | Page down or up in source. |
| <Esc> | Toggle between normal mode and history mode. |
| <Arrow up>/ <Arrow down> | In history mode, these commands display previously
executed commands on the command line. In normal mode, these commands move the cursor through
the source. |