Service Order (tssoc2100m100)

Use this session to view, maintain, or create service orders. You can perform a number of financial and logistical tasks related to a service order, service order activities, and cost lines.

Use the following options to view the related orders within the service package and the related orders originating from the packages such as Purchase, Manufacturing and Warehouse:

  • Related To:
    Starts the Graphical Browser Framework that displays the orders which originate from the current order.
  • Related From:
    Starts the Graphical Browser Framework that displays the orders that originate from the specific order.

Graphical Browser Framework allows you to view Multi level relations of the orders. You can view the details using the following options:

  • View Details:
    Use this option to view the details of the related order.
  • Reverse Tree:
    Use this option to start the Graphical Browser Framework in reverse mode starting from the order you select. For example, if you open Graphical Browser Framework in Related To mode, you can use the reverse option to view the orders in the Related From mode.
Note

Use the Recalculate Price/Discounts Entire Order option to retrieve the default prices of the cost and invoice lines related to the service order or activity line from the service contract. This option is disabled if the price of the related cost lines, activities and invoice lines cannot be modified.

To review the actual and estimated material, labor and other costs, you can use the following satellite sessions:

  • Service Order Material Costs (tssoc2122m000)
  • Service Order Labor Costs (tssoc2132m000)
  • Service Order Other Costs (tssoc2142m000)

If no user profile is defined for the current user in the Service User Profiles (tsmdm1150m000) session, these sessions are displayed instead of the estimated and actual costs sessions.

For more information on displaying the various satellite sessions for this MMT session, refer to:

You can carry out the following tasks:

  • View, maintain, and create a service order. To create a new service order, you can click New on the toolbar. You must also enter the details and save the record.
  • View, maintain, and create service order activities. For each service order, you must enter at least one service order activity. The addition of a service order activity is imperative for the execution of the service order.
  • View, maintain and estimate cost lines: You can enter financial details related to the material, labor, and other cost lines for the service order.

 

Service Order

The number used to identify the service order.

If you create a service order in the details session, you select a series to assign the service order to, and LN generates a number for the service order.

Description

If the service order is created for an external customer, this field displays the name of the sold-to business partner.

If the service order is created for an internal business partner, this field displays the description of the service department that carries out the service order.

Service Order Status

The service order's current status.

Installation group

The installation group that the service order is created for.

Note

The value in this field is defaulted from the installation group linked to the serialized item.

Description

The name or description of the Installation group.

Description

The name of the department.

Item

The item for which the service order is created. You can specify an anonymous item, or a serialized item.

Note
  • This field is disabled if the Status of the service order is set to a value other than Free or Planned.
  • The Item Type must not be set to Generic in the Items - General (tcibd0501m000) session.
  • You must specify this value if the Serial Number is specified and the Empty Item Field Allowed check box is cleared in the Configuration Management Parameters (tscfg0100m000) session.
  • The serialized item must be a part of the specified Installation Group.
Serial Number

The serial number of the item.

Note
  • This field is disabled if the status of the service order is set to a value other than Free or Planned.
  • This field is applicable if:
    • the Status of the serialized item is set to Active, Working Condition, or Defective and is not set to Superseded in the Serialized Items (tscfg2100m000) session.
    • the serialized item is linked to the specified Installation Group.
    • the serialized item is of type Tool that must be refurbished and the Tool Status is not set to New or Blocked.
  • You must specify this value if the item is not a service item.
Description

The description or name of the code.

Contact

The sold-to business partner's contact.

Note

This value is defaulted based on the Sold-to Business Partner, Installation Group, Item and Serial Number.

Sold-to BP

If the service order is created for an external customer, this field displays the name of the sold-to business partner.

If the service order is created for an internal business partners, this field displays the description of the service department that carries out the service order.

Note

This value is defaulted from:

  • the sold-to business partner linked to the Item and/or Installation Group.
  • the sold-to business partner linked to the invoice-to business partner, if the sold-to BP is not linked to the serialized item / installation group.
  • the sold-to business partner of the Project, if specified, and the sold-to business partner is not linked to the invoice-to business partner.

Infor LN uses the following search sequence to default this value from:

  1. the sold-to business partner linked to the Item and/or Installation Group, if specified.
  2. the sold-to business partner linked to the invoice-to business partner, if specified.
  3. the sold-to business partner of the Project, if specified.
Sold-to BP

The name of the business partner.

Warranty Claim

Select this check box when a service order is related to dealer warranty. The service is performed by the dealer for a customer on the behalf of orginal equipment manufacturer. The check box is enabled till a cost line is created for a service order.

If this check box is selected, the Claim Method field is enabled.

Important!

If this check box is selected, a claim header is created which is linked to the service order. A claim line is created when you create Material/Labor/Other cost line for a service order.

Project

The code that uniquely identifies the project to which the service order/service order activity line is linked.

Description

The description or name of the code.

Service Department

The service department that carries out the service order.

Note

This value is defaulted from:

  • the User Profiles (tsmdm1150m000) session.
  • the Serialized Items (tscfg2100m000) session if the serialized item is specified.
  • the Installation Groups (tsbsc1100m000) session, if this value is not specified in the Serialized Items (tscfg2100m000) session.
Description

The description or name of the code.

Preferred Engineer

The service employee preferred to perform the service order.

The service engineer can be allocated to the service order in the following ways:

Note
  • This field can only be filled if the service-order status is Free, Planned, or Released.
  • Changing the service employee on the order header leads to a change in service car, which in turn leads to changes in the actual warehouse of the material lines with delivery type From Warehouse in Car, and in the destination of the warehouse transfer and issue orders.
Description

The name of the service engineer.

Service Contract

service contract.

Note

This value is defaulted based on the specified Installation Group, Item, Serial Number and Coverage Time.

Service Type

The service type. You can define an issue and receipt warehouse order type for a service type in the Service Types (tsmdm0130m000) session. If a warehouse order is created for a service order, LN selects Warehouse Order Type for Issue or Warehouse Order Type for Receipt defined for the service type.

Note

This value is defaulted from:

  • the Repair Warranty field in the Service Order Parameters (tssoc0100m000) session, if the Item is covered by warranty.
  • the Default Service Order Type for Manual Service Order field in the Service Order Parameters (tssoc0100m000) session, if the service order is manually created.

If an Issue and Receipt warehouse order type is not defined for the service type, LN selects the default Warehousing Order Type defined in Default Order Types by Origin (whinh0120m000) session.

Default value

The service type specified in the Service Order Parameters (tssoc0100m000) session. You can specify default service types for service orders that are generated:

  • Manually.
  • From a service order quotation.
  • From a call, in the Call Management module.
  • From a planned activity, in the Service Planning & Concepts module.
  • From a field change order (FCO).
Description

The name or description of the service type.

Order Procedure

Classifies the nature of the service activities that are required. In Service two procedures are predefined: Normal and Emergency.

Default value

The order procedure that is linked to the selected service type.

Location Address

The location and address of the sold-to bp.

Note

Infor LN uses the following search sequence to default the address linked to:

  1. the Installation Group, or the Item, and the Serial Number, if specified.
  2. the ship-to business partner linked to the Sold-to Business Partner, if specified.
  3. the Sold-to Business Partner, if specified.
  4. the Project, if specified.
Claim Method

The method by which the original equipment manufacturer (OEM) reimburses the dealer. The OEM reimburses the dealer for the service provided by the dealer to the customer on the behalf of OEM.

Note

The field is enabled only when the Warranty Claim check box is selected. The option is disabled and the value is set to Not Applicable if the Warranty Claim check box is cleared.

Following are the available values:

  • Reimburse Material The claim method Reimburse Material applies only in case of material cost lines. The value in the Delivery Type field in the Service Order Estimated Material Costs (tssoc2120m000) and in the Service Order Actual Material Costs (tssoc2121m000) is defaulted based on the settings in the Items - Service (tsmdm2100m000) session. You can change the value. The default delivery type is one of the following:
    • From Warehouse
    • From Service Inventory
    The other two delivery types which the user can also use are:
    • Supplier Direct Delivery
    • To Warehouse
  • Reimburse Costs The claim method Reimburse Costs applies when OEM reimburses the cost to the dealer for the material consumed in repair. Additionally, the claim method for Labor and Other Cost Lines is always Reimburse Costs. The default value in the Delivery Type field is always Supplier Direct Delivery. You can change the value
Order Duration

The time required to carry out the service order, which is the duration of all the related service-order activities. This value is defaulted based on the specified service type, preferred engineer, installation group, serialized item, serial number of the item and the service department.

  • The duration cannot be entered on the order header.
  • The duration is determined as the duration between the planned start time and planned finish time of the order header, based on availability of the calendars.
Note

This value is defaulted based on the specified Service Type, Preferred Engineer, Installation Group, Item, Serial Number and the Service Department.

Travel Duration

The amount of time the service engineer requires to travel to the location where the service order is to be implemented. This value is defaulted based on the specified serialized item, serial number, installation group, service area and service department.

Default value

The travel time specified for the service order's Installation group in the Installation Groups (tsbsc1100m000) session.

Note
  • This field is enabled only if the Travel Planning Method field is set to Header Based.
  • This value is defaulted based on the specified Item, Serial Number, Installation Group, Service Area and Service Department.
Planned Start Time

The time by which the service order must be started.

Note
  • This field is enabled only for the service orders with the status Free, Planned, or Released.
  • If you add an activity to the service order with a planned start time (PST) that is earlier than the value you enter in this field, LN updates this field with the value of the activity's PST.
Planned Finish Time

The time at which the service order is planned to finish. This value is defaulted based on the specified order duration, preferred engineer, installation group, serialized item, serial number of the item and the service department.

If you add a service order activity with a Planned Finish Time (PFT) that is later than the value you enter in this field, LN updates this field with the value of the activity's PFT.

Note

This field is enabled only for the service orders with the status Free, Planned, or Released.

Earliest Start Time

The time that the service order is planned to start at the earliest.

This date is used as the planned delivery date for allocating the required materials in a warehouse or as the planned delivery date for items to be purchased.

Note
  • The earliest start time of the header is determined by subtracting the smallest slack time from the planned start time of the header.
Latest Finish Time

The time that the service order is planned to finish at the latest.

Note
  • The latest finish time of the header is determined by adding the smallest slack time to the planned finish time of the header.
Appointment

If this check box is selected, an appointment with the sold-to business partner is confirmed.

Material Issue Constraint

The level at which, all the material must be shipped completely.

Note
  • LN defaults this value from the Service Order Parameters (tssoc0100m000) session.
  • This field is disabled if:
    • The Status of the Service Order is set to Completed.
    • For a Released Service Order, a related warehouse order exists, that cannot be modified.
Pricing Contract

The contract linked to the service order line for which contract price is defined.

Note

This value is defaulted based on the Installation Group, Coverage Time, Item and the Serial Number.

Pricing Contract Change

The number that identifies the active contract change number at the time of linking. The order uses the contract terms that are activated for this contract change number.

Note

This value is defaulted based on the Installation Group, Coverage Time, Item and the Serial Number.

Pricing Contract Line

Contract configuration line liked to the service order line for which contract price is defined.

Note

This value is defaulted based on the specified Installation Group, Item, Serial Number and Coverage Time.

Pricing Method

The pricing method that Infor LN uses to invoice the service order.

Allowed values

Pricing Method

Note
  • This field is disabled if the Pricing Contract is specified.
  • This value is defaulted based on the Installation Group, Item, Serial Number, Sold-to Business Partner, Service Type, Service Order Quotation, Project, and the Coverage Time.

If the Pricing Method field is set to Fixed Order Price, a record is crated in Service Order Fixed Prices (tssoc2115m000) session.

  • the Use Fixed Repair Prices in Service Orders check box is selected in the Service Order Parameters (tssoc0100m000) session.
Price Origin

The origin from which the sales price is retrieved.

Allowed values

Price Origin

Default value

Not Applicable

Sales Price

The sales price for the service order. This price is expressed in the currency specified in the Currency field.

Note
  • This field is applicable only if the Pricing Method is set to Fixed Order Price.
  • This field is enabled only if the Order Status is set to Free, Planned or Released.
  • When the pricing contract is specified for the service order, Infor LN defaults the sales price (fixed order price) from the Fixed Price Terms (tsctm1111m000) session based on the following criteria:
    • The Master Routing/ Routing Option specified in the Fixed Price Terms (tsctm1111m000) session must be same as that specified for the service order.
    • If the above criteria is not met, the Price Level must set to Any Order in the Fixed Price Terms (tsctm1111m000) session.
  • When the pricing contract is not specified, but the master routing/routing option is specified for the service order, Infor LN defaults the sales price from the Master Routings (tsacm1101m100)/ Routing Options (tsacm1101m200) session, if the Fixed Price check box is selected.
Master Routing

The master routing used to determine the fixed order price for the service order.

Note
  • This field is applicable only if the Use Master Routing check box is selected in the Service Order Parameters (tssoc0100m000) session.
  • For this master routing, the Activity Use field must be set to Field Service or General in the Master Routings (tsacm1101m100) session.
  • This field is enabled only if the Order Status is set to Free, Planned or Released.
  • Infor LN defaults this value from the Master Routings (tsacm1101m100) session, if master routing is specified for the service order. In case a service order quotation is linked to the service order, Infor LN defaults this value from the Service Order Quotations (tssoc1100m000) session.
Routing Option

The routing option used to determine the fixed order price for the service order.

Note
  • This field is applicable only if the Use Master Routing check box is selected in the Service Order Parameters (tssoc0100m000) session and the master routing is specified.
  • This value must be linked to the Master Routing in the Routing Options (tsacm1101m200) session.
  • This field is enabled only if the Order Status is set to Free, Planned or Released.
  • Infor LN defaults this value with the routing option linked to the specified Master Routing.
Material
Inventory Check Status

The overall inventory status for all the material lines belonging to the order.

Allowed values

Inventory Status

ATP Inventory Available

Indicates if the inventory for all the material lines belonging to the order is available, calculated by the ATP check.

Available Date

Latest ATP Date for all the material lines belonging to the order.

Checked On Date

Latest ATP Check On Date for all the material lines belonging to the order.

Planned Inventory Available

Indicates if the inventory for all the material lines belonging to the order is available, calculated by the Planned inventory check.

Available Date

Latest Planned Available Date for all the material lines belonging to the order.

Checked On Date

Latest Planned Check On Date for all the material lines belonging to the order.

On Hand Inventory Available

Indicates if the inventory for all the material lines belonging to the order is available, calculated by the On Hand inventory check.

Checked On Date

Latest On Hand Check On Date for all the material lines belonging to the order.

Estimated Order Amount

The total sales amount of the header, the activities and the estimated cost lines. This price is expressed in the specified Currency.

Actual Order Amount

The total sales amount of the header, the activities and the actual cost lines. This price is expressed in the specified Currency.

Contract Ignored

If this check box is selected/cleared, the following are the possible scenarios:

  • If this check box is selected and Pricing Contract, Pricing Contract Change and the Pricing Contract Line fields are specified, a valid service contract is linked and the sales price of the service contract is overruled.
  • If this check box is selected and Pricing Contract, Pricing Contract Change and the Pricing Contract Line fields are not specified, a service contract is not linked.
  • If this check box is not selected and Pricing Contract, Pricing Contract Change and the Pricing Contract Line fields are specified, a valid service contract exists, and pricing terms data is used.
  • If this check box is not selected and Pricing Contract, Pricing Contract Change and the Pricing Contract Line fields are not specified, a valid service contract does not exist.
Note

This is a display field.

This field is visible only if the Use Prices in Service Contracts check box is selected in the Contract Management Parameters (tsctm0100m000) session.

 

Generate

Generates a new serial number for the serialized item.

Hours Accounting

Use this option to maintain hours accounting for the service order.

Release

Sets the status of the service order from Free to Released. The service order activities you select are released, independent of the header status, which can be Free or Planned. The status of the service order activities that are not selected for release remains unchanged.

Complete

Sets the status of a service order from Released to Completed.

Cost

Costs the service order.

Issue Stock for Order

Issues stock from the warehouse.

Link / Unlink Contract

Allows the user to link or unlink the service contract with the pricing terms.

  • This option is enabled only if the pricing contract is defined for the service contract.
  • This option is visible only if the Use Prices in Service Contracts check box is selected in the Contract Management Parameters (tsctm0100m000) session.
To Supplier Claim

Transfer all Service Order Lines to the Supplier Claim Requests (tscmm1114m000) session. The form command is enabled only if the Service Order Lines are released and one of the lines must be Costed. During the process a message will be given for all the lines that cannot be transferred.