Item - Purchase Business Partner (tdipu0110m000)

Use this session to view, enter, or maintain business partner specific information related to a purchased item. This session contains the default logistic data of a purchase business partner, required for a purchase contract, purchase schedule, or purchase order.

For internal business partners, schedule information can be derived from the current session. For external business partners, purchase schedules are always based on a purchase contract line and schedule information is derived from the Purchase Contract Line Logistic Data (tdpur3102m000) session.

Note

Before Enterprise Planning can select a buy-from business partners for an item, on the Buy-from BP Search Orders tab of the Purchase Contract Parameters (tdpur0100m300) session, you must specify a search level for item business partners.

 

Item Group
Item

item

Note

In the Items - General (tcibd0501m000) session, you can define whether orders are issued for an item according to a purchase schedule, and you can define a purchase schedule type, based on which the orders are generated. If no purchase schedule is in use for the item, you can still manually insert the item into a purchase push schedule.

Related topics

Buy-from BP

buy-from business partner

Default value

When generating a purchase order, the searching logic LN uses to retrieve a buy-from business partner is as follows:

  1. From the Buy-from BP field in the Item - Purchase (tdipu0101m000) session.
  2. From the Buy-from BP in the Item - Purchase Business Partner (tdipu0110m000) session that is:
    • Set to Single Source in the Item - Purchase Business Partner (tdipu0110m000) session.
    • Linked to an Item in the Item - Purchase Business Partner (tdipu0110m000) session.
  3. From the Buy-from BP in the Item - Purchase Business Partner (tdipu0110m000) session that is:
    • Set to Preferred in the Preferred field of the Item - Purchase Business Partner (tdipu0110m000) session.
    • Linked to an Item in the Item - Purchase Business Partner (tdipu0110m000) session.
  4. From the Buy-from BP in the Item - Purchase Business Partner (tdipu0110m000) session that is:
    • Set to Single Source in the Item - Purchase Business Partner (tdipu0110m000) session.
    • Linked to an Item Group in the Item - Purchase Business Partner (tdipu0110m000) session.
  5. From the Buy-from BP in the Item - Purchase Business Partner (tdipu0110m000) session that is:
    • Set to Preferred in the Preferred field of the Item - Purchase Business Partner (tdipu0110m000) session.
    • Linked to an Item Group in the Item - Purchase Business Partner (tdipu0110m000) session.
Note

When a purchase order is generated by Enterprise Planning, LN skips step one.

Effective Date
Expiry Date

The last day on which a record is valid. If you do not specify an expiry time, the validity expires at the end of the expiry date, at 24:00 hours.

Item - Buy-from BP status

The status of the item - purchase business partner combination.

Blocking Reason

The code that can be linked to the item - purchase business partner combination to describe the reason for blocking.

Invoice by Stage Payments

If this check box is selected, stage payments must be used for the item-purchase business partner combination.

Default value

The setting of this check box is defaulted to the Invoice by Stage Payments check box in the RFQ Responses (tdpur1506m000) and Purchase Order Lines (tdpur4101m000) sessions.

Stage Payment Schedule Set

If you use stage payments for the item-purchase business partner combination, you can specify a default stage payment schedule in this field.

If this field is specified, stage payment lines are automatically generated when a record is saved in the RFQ Responses (tdpur1506m000) or Purchase Order Lines (tdpur4101m000) sessions that includes the item-purchase business partner combination.

Note

You can specify stage payment schedules in the Stage Payment Schedule (tcmcs2640m000) session.

Preferred

Use this field to indicate whether the business partner is preferred or fixed for the item.

Note

When generating orders, LN first searches for fixed purchase business partners and then for preferred purchase business partners by the purchase business partners' priority, as defined in the Priority field of the current session. If you set the current field to Single Source, and the single source purchase business partner is not valid at the moment of planned delivery, or cannot deliver the required demand, LN tries to fulfill the demand with planned production orders or planned distribution orders, following the strategy that you defined for the plan item. If you set the current field to Preferred, and none of the buy-from business partners is valid at the moment of planned delivery, or cannot deliver the required demand, LN generates a planned purchase order for an empty purchase business partner.

Allowed values

Preference

Carrier
Export License Required

If this check box is selected, an export license is required for the item.

Area

The code of the (commercial) area in which the buy-from business partner is established.

Note

The code of the area is for example used as sorting criteria for statistics.

Self Billed Invoice

If this check box is selected, you pay an invoice to the purchase business partner without receiving an invoice for the item. As a result the invoice for the item is self-billed by your company.

Related topics

Invoice after

You can indicate when a self billed invoice can be generated.

  • Inspection
    Self bills can be generated after the goods are inspected and approved.
  • Receipt
    Self bills can be generated after the goods are received or consumed.

Related topics

Self-Billing Date Type

If the Self-Billing check box is selected, use this field to define on which date the self-billing payments are based. Either the receipt date or the shipping date can be used as the invoice date on self-billed invoices.

Related topics

Self-Billing Method

If the Self-Billing check box is selected, you must select a self-billing method, which determines how self-billing is carried out.

The self-billing method determines, among other things, the criteria for composing the invoice, the invoicing interval, the output medium, and so on.

Related topics

Item Purchase Text (Internal)

If this check box is selected, a text is added for internal purposes only.

Item Purchase Text

If this check box is selected, a text is added that is printed on external documents.

Priority

An option that enables you to add a certain rating for suppliers. If the priority is defined, the item/supplier combinations are sorted according to descending priority.

Allowed values

The allowed values range from 1 (= highest priority) to 999 (= lowest priority).

Sourcing Percentage

A percentage used to calculate how orders are divided among suppliers.

Standard Configuration

If this check box is selected, the item - purchase business partner combination is valid unless it has exceptions attached that define the combination as not valid. If this check box is selected, and the purchase order has no effectivity unit linked to it, the purchase business partner is considered as valid.

If this check box is cleared, Enterprise Planning considers the item - purchase business partner combination as not valid, unless it has exceptions attached that define the combination as valid for the effectivity unit of the purchase order.

Note

This check box is used to:

  • Determine whether an item - purchase business partner combination is valid or not. However, the standard configuration can be overruled by exceptions.
  • Retrieve valid business partners to return them to Enterprise Planning during the approved business partner selection process of order planning. During this process, Enterprise Planning communicates the effectivity unit from the Sales Order Lines (tdsls4101m000) session or the Sales Quotation Lines (tdsls1501m000) session to Purchase Control (PUR). PUR then uses this check box to determine which purchase business partners are valid for the item and can be returned to Enterprise Planning.
  • Check the validity of the item - purchase business partner combination when you manually insert a purchase order line to which an effectivity unit is linked in the Purchase Order Lines (tdpur4101m000) session.

Default value

By default, LN selects this check box if no exceptions are attached to this item - purchase business partner combination. However, you can manually select or clear this check box.

Exceptions present

If this check box is selected, the item - purchase business partner combination has exceptions attached that can overrule the standard configuration settings.

Note

This check box is used to:

  • Retrieve valid business partners to return them to Enterprise Planning during the approved business partner selection process of order planning. During this process, Enterprise Planning communicates the effectivity unit that is entered in the Sales Order Lines (tdsls4101m000), or the Sales Quotation Lines (tdsls1501m000) to Purchase Control (PUR). PUR then uses this check box to determine which purchase business partners are valid for the item and can be returned to Enterprise Planning.
  • Check the validity of the item - purchase business partner combination when you manually insert a purchase order line to which an effectivity unit is linked in the Purchase Order Lines (tdpur4101m000) session.

Default value

LN selects this check box if exceptions are linked to this item - purchase business partner combination in the Exceptions (tcuef0105m000) session.

Receipt Date Tolerance (-)

The number of days early that a supplier can make a delivery.

This tolerance is used only for pull call-off schedules.

Receipt Date Tolerance (+)

The number of days late that a supplier can make a delivery.

This tolerance is used only for pull call-off schedules.

Receipt Quantity Tolerance (-)

The percentage that the received quantity may be less than the ordered quantity.

Default value

LN retrieves the default value from the Qty. Tolerance (-) field of the Item - Purchase (tdipu0101m000) session.

LN uses the Receipt Quantity Tolerance (-) to determine the default value of the Minimum Quantity Tolerance field in the Warehousing Orders (whinh2100m000) session as follows:

Minimum Quantity Tolerance = 100 - Quantity Tolerance (-)
Example
Receipt Quantity Tolerance (-)= 10%
Minimum Quantity Tolerance= 100% - 10% = 90%
Ordered quantity200

 

In this case you do not accept receipts with a quantity less than 180.

Note

This tolerance is used only for pull call-off schedules.

Receipt Quantity Tolerance (+)

The percentage that the received quantity is allowed to be more than the ordered quantity.

Default value

LN retrieves the default value from the Quantity Tolerance (+) field of the Item - Purchase (tdipu0101m000) session.

LN uses the Receipt Quantity Tolerance (+) to determine the default value of the Maximum Quantity Tolerance field in the Warehousing Orders (whinh2100m000) session as follows:

Max. Quantity Tolerance = 100 + Quantity Tolerance (+)
Example
Receipt Quantity Tolerance (-)= 10%
Minimum Quantity Tolerance= 100% + 10% = 110%
Ordered quantity200

 

In this case you do not accept receipts with a quantity over 220.

Note

For push schedules, the tolerated over-receipt quantity is calculated as follows:

  • If blanket warehouse orders are used, the ordered quantity of the entire schedule is used for the calculation.
  • If receipts are made in Purchase Control, the ordered quantity of the schedule line yet to be received, is used for the calculation.

The receipt quantity that exceeds the ordered quantity is added to the last schedule line.

Hard Stop on Quantity

The way in which LN must react to a receipt that does not meet the quantity tolerances.

This field is defaulted to the Hard Stop on Quantity field of the Inbound Order Lines (whinh2110m000) session.

Allowed values

Hard stop

Hard Stop on Date

The way in which LN must react to a receipt that does not meet the time tolerances.

This field is defaulted to the Hard Stop on Time field of the Inbound Order Lines (whinh2110m000) session.

Allowed values

Hard stop

Purchase Office
Manufacturer

The default manufacturer for the item - business partner combination.

Note

If the item is an MPN item, which you can define in the MPN Item field of the Item - Purchase (tdipu0101m000) session, this field is empty and disabled.

Inspection

If this check box is selected, actual deliveries must be inspected.

Note

When you create a purchase order line for the item, by default, the Inspection check box in the Purchase Order Lines (tdpur4101m000) session receives the same value as the Inspection check box in the Items - Purchase Business Partner (tdipu0110m000) session. If no combination of item and business partner is specified in the Items - Purchase Business Partner (tdipu0110m000) session, the Inspection check box in the Purchase Order Lines (tdpur4101m000) session is selected only if the same check box is also selected in the Ship-from Business Partner (tccom4121s000) and Item - Purchase (tdipu0601m000) sessions.

Conformance Reporting

The conformance reporting code linked to this combination of item and purchase business partner.

Note

You can specify a conformance reporting code only if the Inspection check box is selected in this session.

Consigned

If this check box is selected, the item on the purchase schedule is consignment inventory.

Note

If you want to link the payment for a consumption of consignment inventory directly to the replenishment schedule, do not select this check box.

For Commingling

If this check box is selected, and the Commingling for check box is also selected for the relevant origin in the Purchase Order Parameters (tdpur0100m400) session, the item can be commingled for this buy-from business partner.

Order Quantity Multiple

The order quantity increment expressed in the inventory unit.

Note

This field cannot have the value 0.

Minimum Order Quantity
Maximum Order Quantity
Fixed Order Quantity

The fixed order quantity expressed in the inventory unit.

If an item's order method is Fixed Order Quantity, which you can define in the Order Method field of the Item - Ordering (tcibd2100s000) session, the value of the session's Fixed Order Quantity field is defaulted to the current field. If item ordering data is not present, the default value is 1.

Note
  • The value of this field must be a multiple of the Order Quantity Multiple field.
  • The value of this field must lie between the values of the Minimum Order Quantity and Maximum Order Quantity fields.

Performance aspects

The setting of this field could affect system performance and database growth. For more information, refer to Fixed order quantity.

Economic Order Quantity

The economic order quantity expressed in the inventory unit.

Note

If the order method is Economic Order Quantity, the economic order quantity is the most favourable quantity for planned purchase orders. This order method is defined in the Item - Ordering (tcibd2100s000) session.

Internal Processing Time

The time required between the recognition of needs and the release of the purchase order. Internal processing time includes document preparation and sourcing.

If purchase schedules are automatically generated by Enterprise Planning for an internal business partner, this field is used in the purchase business partner selection process. Enterprise Planning uses this field, together with the Safety Time field and the Supply Time field, to assign a priority to purchase business partners who can deliver the required item.

Internal Processing Time

The unit in which the internal processing time is expressed.

Safety Time

The time that you can add to the normal lead time to protect delivery of goods against fluctuations in the lead time so that an order can be completed before the order's real need date.

If purchase schedules are automatically generated by Enterprise Planning for an internal business partner, this field is used in the purchase business partner selection process. Enterprise Planning uses this field, together with the Internal Processing Time field and the Supply Time field, to assign a priority to purchase business partners who can deliver the required item.

Safety Time

The unit in which the safety time is expressed.

Supply Time

The total time required to obtain an item that is forecasted. This time is used to calculate an item's order lead time, based on which a company takes commitment decisions and executes capacity planning and order management.

Example

For item A, the supplier communicated a supply time of 50 days. This is in fact a reduced lead time and is only possible because a three year forecast is sent to the supplier for this item. If additional quantities are needed, which are not included in the forecast, the supplier needs the full supply time, which is 300 days.

If purchase schedules are automatically generated by Enterprise Planning for an internal business partner, this field is used in the purchase business partner selection process. Enterprise Planning uses this field, together with the Internal Processing Time field and the Safety Time field, to assign a priority to purchase business partners who can deliver the required item.

Note

If you want to retrieve the supply time from an affiliated supplying company, use the Update Supply Times in Item - Purchase Business Partner (tdipu0210m100) session, which you can start from the appropriate menu of the current session.

Supply Time

The unit in which the supply time is expressed.

Full Supply Time

The total time required to obtain an item that is not forecasted. This time is used to calculate the full cumulative order lead time for an item, which includes the cumulative lead time of purchased parts.

Example

For item A, the supplier communicated a supply time of 50 days. This is in fact a reduced lead time and is only possible because a three year forecast is sent to the supplier for this item. If additional quantities are needed, which are not included in the forecast, the supplier needs the full supply time, which is 300 days.

Note
Full Supply Time

The unit in which the full supply time is expressed.

Note

This field is only visible if the Use Full Supply Time check box is selected in the Purchase Parameters (tdpur0100m000) session.

Transportation Time (Days)

The transportation time in days, which can be calculated in two ways.

LN retrieves the transportation time as follows:

  • If Freight is implemented, which you can define in the Implemented Software Components (tccom0500m000) session, calculation of the transportation time is based on carrier, and routes. Route plans and service levels are not known at this point in time.

    LN performs the following steps to retrieve the transportation time.

    1. If the route, the carrier, the origin, and the destination addresses are known, LN first searches for route plans and then for standard routes with matching routes, carriers, and addresses.
    2. If more than one matching route plan or standard route is found, LN selects the route plan or standard route with a transport means group that matches the transport means group of the carrier.
    3. If LN still finds more than one route plan or standard route, route plans have priority over standard routes. If only standard routes are found, the standard route is selected following the settings of the Carrier Selection Criterion parameter in the Freight Planning Parameters (fmlbd0100m000) session.
    4. If LN still finds more than one route plan, it selects the first one it encounters in the database.
  • If Freight is not implemented, LN takes the transportation time between the ship-from business partner's address and the receiving warehouse's address, based on a relevant distance table (if available) in the Distance Table by City (tccom4137s000) session or in the Distance Table by ZIP Code/Postal Code (tccom4138s000) session. From which of these two sessions the transportation time is retrieved, depends on the value of the Usage Distance Tables field in the COM Parameters (tccom0000s000) session.
Calculated Lead Time (Days)

The rough purchase item lead time expressed in days. The calculated lead time is only used to determine the planned receipt date of forecast demand for which no accurate determination of the planned receipt date is yet required.

The calculated lead time is based on the availability type and calendar template that are linked to the following fields:

  • Supply Time
  • Internal Processing Time
  • Safety Time
  • Transportation Time (Days)
Note
Calculated Full Lead Time (Days)

The rough purchase full item lead time expressed in days.

The calculated full lead time is based on the availability type and calendar template that are linked to the following fields:

  • Full Supply Time.
  • Internal Processing Time.
  • Safety Time.
  • Transportation Time (Days).
Note
  • This field is only visible if the Use Full Supply Time check box is selected in the Purchase Parameters (tdpur0100m000) session.
  • Each time you open or close the current session, LN (re)calculates the calculated full lead time.
  • If you want to recalculate the calculated full lead time for a range of items/business partners, run the Update Calculated Lead Time in Item Purchase - BP (tdipu0210m000) session with the Update Calculated Full Lead Time check box selected, which you can start from the appropriate menu of the current session.
Inbound Lead Time

The time interval between the arrival of the items and the actual storage in the warehouse.

Default value

This field is defaulted from the Inbound Lead Time field of the Warehouse - Item (whwmd2110s000) session.

In this session, this field is displayed for information purposes only.

Inbound Lead Time

The unit in which the inbound lead time is expressed.

Default value

This field is defaulted from the Warehouse - Item (whwmd2110s000) session.

Lead Time Horizon (Days)

The number of days that, together with the current date/generation date, determines whether:

  • LN uses the calculated lead time to determine the planned receipt date. LN uses this calculation when the date for which the lead time is calculated, falls outside the lead time horizon. Planned dates are calculated using the value from the Calculated Lead Time (Days) field, which is derived from the company's calendar.
  • LN determines the planned receipt date, taking into account the calendars that are related to the lead time components. LN uses this calculation when the date for which the lead time is calculated, lies between the current date and the lead time horizon.
Schedule Release

Use this field to indicate what schedule release type is used, based on which an EDI message is sent. This message is indicated by the used schedule.

Note

Sequence Shipping Schedule Only can only be selected if the Preferred field is set to Single Source and the schedule is a pull schedule.

Communication Channel

The way in which purchase releases must be communicated to the business partner.

Related topics

Package Definition

The package definition for the item or item group.

Related topics

Release EDI Message Directly

If the value of the Communication Channel field is EDI, and If this check box is selected,, EDI messages are prepared at the moment a purchase release receives the status Scheduled in the Purchase Releases (tdpur3120m000) session.

If this check box is cleared, you can prepare EDI messages by selecting the Prepare EDI messages check box in the Print Purchase Releases (tdpur3422m000) session.

Note
  • Electronic Commerce can only send the generated EDI messages to the purchase business partner if the status of the purchase release in the Purchase Releases (tdpur3120m000) session is Scheduled. If the status is Created, the messages are not sent until the status becomes Scheduled.
  • At the moment Electronic Commerce sends the EDI messages to the purchase business partner, a purchase release receives the status Sent.

Related topics

Schedule Type

The type of purchase schedule, which can be push schedule or pull schedule.

Default value

This value is retrieved from the Items - General (tcibd0501m000) session.

Authorizations

If this check box is selected, authorizations are used and calculated.

Authorizations for the schedule are updated in the FAB/RAW Authorizations (tdpur3534m000) session as soon as:

  • A purchase release gets the status Sent.
  • The cumulatives are reset in the Reset Cumulatives (tdpur3230m000) session.
FAB Period

The time period during which the supplier is authorized to manufacture the goods required on a schedule, calculated from the schedule issue date on for push schedules, and from the current date on for pull forecast schedules.

The fab period is expressed in a number of days.

Example
  • CUM start quantity: 10000
  • Schedule issue date/current date: 05.07.99
  • Fab period: 20 days
Issue/current dateQuantity
05.07.99100
12.07.99100
19.07.99100
26.07.99100

 

Fab time fence   : 05.07.99 (+ 20 days) = 25.07.99.
Fab authorization: 10000 + 100 + 100 + 100 = 10300.
RAW Period

The time period during which the supplier is authorized to procure the raw materials required on a schedule, calculated from the schedule issue date on for push schedules, and from the current date on for pull forecast schedules.

The raw period is expressed in a number of days.

Example
  • CUM start quantity: 10000
  • Schedule issue date/current date: 05.07.99
  • Raw period: 20 days
Issue/current dateQuantity
05.07.99100
12.07.99100
19.07.99100
26.07.99100

 

Raw time fence   : 05.07.99 (+ 20 days) = 25.07.99.
Raw authorization: 10000 + 100 + 100 + 100 = 10300.
Authorizations to be

This field indicates whether the high fab authorizations and high raw authorizations must be carried forward or reset when the cumulatives (CUMS) are reset in the Reset Cumulatives (tdpur3230m000) session.

Transaction Time Fence

This field indicates for which purchase schedule lines inventory transactions must be logged in the Warehouse Orders module of Warehousing, and financial transactions must be logged in the General Ledger module, and the Accounts Payable module of Financials.

Irrespective of the chosen parameter:

  • Inventory transactions and financial transactions are always logged for pull call-off schedules.
  • No transactions are logged for pull forecast schedules. As a result, this parameter is only related to push schedules and not to pull schedules.
Note

Even if a purchase schedule line falls outside the FAB period, transactions are still logged for the schedule line as soon as its requirement type becomes Firm.

Performance aspects

The setting of this field could affect system performance and database growth. For more information, refer to Transaction time fence.

Segment Set for Material Release

The segment set that is related to a material release.

Note
  • A segment set for material release is only used in push schedules and pull forecast schedules. For pull call-off schedules, no segment sets are used ( pull schedules).
  • If the value of the Schedule Release field is Shipping Schedule Only or Sequence Shipping Schedule Only, you cannot enter a segment set in this field.

Default value

The Segment Set for Material Release from the Purchase Contract Parameters (tdpur0100m300) session.

Related topics

Segment Set for Shipping Schedule

The segment set that is related to a shipping schedule.

Note
  • A segment set for shipping schedule is only used in push schedules. For pull schedules, this segment set is not used.
  • If the value of the Schedule Release field is Material Release, you cannot enter a segment set in this field.

Default value

The Segment Set for Shipping Schedule from the Purchase Contract Parameters (tdpur0100m300) session.

Related topics

Issue Pattern for Material Release

The pattern used to determine the issue date for material releases.

Note
  • An issue pattern for material releases is only used in push schedules and pull forecast schedules. In case of pull call-off schedules, no issue patterns are used ( pull schedules).
  • If the value of the Schedule Release field is Shipping Schedule Only or Sequence Shipping Schedule Only, you cannot enter an issue pattern in this field.

Default value

The Issue Pattern for Material Release from the Purchase Contract Parameters (tdpur0100m300) session.

Issue Pattern for Shipping Schedule

The pattern used to determine the issue date for shipping schedules.

Note
  • An issue pattern for shipping schedules is only used for push schedules. In case of pull schedules, this issue pattern is not used.
  • If the value of the Schedule Release field is Material Release, you cannot enter an issue pattern in this field.

Default value

The Issue Pattern for Shipping Schedule from the Purchase Contract Parameters (tdpur0100m300) session.

Frozen Period Increasing Qty

The number of days, calculated from the current date, for which you can no longer increase the quantity of required items.

If the purchase schedule is Shipment Based, which you can define in the Shipment or Receipt Based field of the current session, frozen time limits are based on planned shipment dates. If the schedule is Receipt Based, frozen time limits are based on planned receipt dates.

Frozen Period Decreasing Qty

The number of days, calculated from the current date, for which you can no longer reduce the quantity of required items.

If the purchase schedule is Shipment Based, which you can define in the Shipment/Delivery field of the current session, frozen time limits are based on planned shipment dates. If the schedule is Receipt Based, frozen time limits are based on planned receipt dates.

Use Working Days for Frozen Period

If this check box is selected, only working days are used when calculating frozen periods.

If this check box is cleared, calendar days are used when calculating frozen periods.

Note

If this check box is selected, the specified number of working days is added to the current date. The working days are retrieved from the calendar that is linked to the ship-from business partner, the buy-from business partner, or the company.

If this check box is cleared, the specified number of calendar days is added to the current date.

When planning the dates, the availability type from the Purchase Parameters (tdpur0100m000) session is used.

Delete Past Schedule Lines

This check box determines how to handle undelivered and redundant quantities on schedule lines with dates in the past.

If this check box is selected, the schedule lines are deleted by Enterprise Planning.

If this check box is cleared, planning messages are generated informing a planner to manually delete the schedule lines.

Note

This check box can be selected only if the Frozen Period for Decreasing Qty is zero in the current session.

Generate Freight Orders

If this check box is selected, freight orders must be generated for purchase orders that contain this item - purchase business partner combination.

Default value

The value of this check box is defaulted to the Generate Freight Orders from Purchase check box in the Purchase Order Lines (tdpur4101m000) session and the Purchase Order Line Details (tdpur4101m200), but can be overwritten in these sessions.

Generate Order for Unexpected Warehouse Receipt

If this check box is selected, and a warehouse receipt has no corresponding inbound order, LN automatically creates a purchase order against which the items are received for the purchase business partner.

LN automatically:

  • Approves and releases the generated purchase order to Warehousing.
  • Links the unexpected receipt line to the inbound order line and confirms it.
Note

You cannot select this check box if:

Shipment or Receipt Based

Specify on what date and time (schedule) requirements are based.

Note

This field is defaulted to the Shipment/Receipt Based field of the Purchase Schedules (tdpur3110m000) session.

Supplier Capacity

The ship-from business partner capacity expressed in the inventory unit.

Note

Enterprise Planning uses this field when generating planned orders for a purchase business partner.

Order Quantity Multiple

The unit of measure in which the inventory of an item is recorded, such as piece, kilogram, box of 12, or meter.

The inventory unit is also used as the base unit in measure conversions, especially for conversions that concern the order unit and the price unit on a purchase order or a sales order. These conversions always use the inventory unit as the base unit. An inventory unit therefore applies to all item types, also to item types that cannot be kept in stock.

Minimum Capacity Tolerance

The minimum percentage that can stay below ship-from business partner capacity.

Maximum Capacity Tolerance

The maximum percentage that can exceed ship-from business partner capacity.

Note

Enterprise Planning uses this field when generating planned orders for a purchase business partner.

The maximum capacity tolerance is calculated as follows:

Maximum Capacity Tolerance * Supplier Capacity + Supplier Capacity

Example

  • Supplier capacity: 100 pieces.
  • Maximum capacity tolerance: 20 (percent).
  • Capacity time unit: week.

Enterprise Planning takes into account that the purchase business partner can only deliver a maximum number of 120 pieces a week.

Capacity Time Unit

The time unit in which the ship-from business partner capacity is expressed.

 

Calculate
Calculate
Update Calculated Lead Time in Item - BP...

Starts the Update Calculated Lead Time in Item Purchase - BP (tdipu0210m000) session in which you can recalculate the calculated (full) lead time for a range of items/business partners.

Update Supply Times in Item - Purchase Business Partner

Starts the Update Calculated Lead Time in Item Purchase - BP (tdipu0210m000) session, in which you can retrieve the (full) supply time from an affiliated supplying company.

Exceptions...

Starts the Exceptions (tcuef0105m000) session, in which you can define unit effective purchase business partners.

Nett Prices per Buy-from Business Partner
Approved Business Partners

Only displays the approved item - purchase business partner combinations.

Approved Parts

For the business partner on the purchase document that started the Items - Purchase Business Partner (tdipu0110m000) session, only approved items are displayed for selection.

These items are displayed for the business partner:

  • Items for which the Check Approved Source List check box is selected in the Items - Purchase (tdipu0101m000) session and the business partner is approved in the Items - Purchase Business Partner (tdipu0110m000) session. If no item-purchase business partner combination is available in the Items - Purchase Business Partner (tdipu0110m000) session, no items are displayed.
  • Items for which the Check Approved Source List check box is cleared.
All Parts

For the business partner on the purchase document that started the Items - Purchase Business Partner (tdipu0110m000) session, all items are displayed for selection.