The code of the (first) loading address of the goods that must be transported. A load can have more than one loading and unloading address. This address is replaced if a new shipment is added that has an address with a earlier start date.
Loads (fmlbd4100m000)Use this session to view and maintain loads. You can create loads with the Freight load building engine, an external planning engine, or manually. A load is a part of a load plan. You can manually create a load and add shipments to it or remove shipments from it. However, the load status determines whether you can delete or make a change to a load, and if changing is allowed, what changes you can make. Note Use the Maps section to view the location of the Start Address and the End Address. You must select only one record at a time. Print options On the Print submenu of the File menu, the following print options are available:
Menu options You can access the following options on the appropriate menu of the current session:
Start Address End Address The last unloading address. A load can have more than one unloading address. This address is replaced if a new shipment is added that has an address with a later end date. Planned Start Date The start date of load. This is the load date of the first shipment of the load. Planned End Date The (last) unload date of the load. A load can have more than one unloading address, and each address has a different load and/or unload date and time. Number of Shipments The number of shipments included in the load. Number of Shipment Lines The number of shipment lines included in the load. Number of Cost Lines The number of additional cost lines included in the load. Load Text Additional information about the load. To start up the text
editor, click Carrier Invoice If this check box is selected, the carrier invoices your organization with transportation costs. To invoice the business partner to compensate for the costs incurred from the carrier invoice, the actual costs are taken from the carrier invoice, which is stored in the Accounts Payable module of Financials. If this check box is cleared, the carrier does not invoice your organization for transportation costs. To invoice the business partner with the transport costs actually incurred, you can make the estimated costs actual when the final changes to the estimated costs are made on the load. To make the estimated costs actual, on the appropriate menu, select Set Actual Cost--> Final. Invoice-from BP Open Balance This field displays the balance of all outstanding freight costs of the Invoice-to BP. Open Balance The currency in which the open balance is expressed. Pay-to BP Payment Terms The payment terms that apply to the current load or freight order. The default value in this field is taken from the Payment Terms of the originating order. Payment Method Payment Agreement A schedule for the generation of monthly billing invoices. For example, you can define a closing method to generate two monthly billing invoices during a month: one on the 15th day and one at the end of the month Purchase Type A purchase order property that enables you to identify the kind of purchase made and in this way, the kind of payable. This property is used to post the purchase to the correct Accounts Payable account when the invoice is created. To post a purchase invoice, LN retrieves the control account from the purchase type linked to the purchase order line. Currency The currency used to express the freight costs. This is the currency defined for the buy-from business partner of the carrier that transports the current load. Exchange Rate Type A way to group currency exchange rates. You can assign different currency exchange rates to different invoice-to business partners and/or to different types of transactions (purchase, sales, and so on). Rate Determiner The exchange rate agreed upon by contract with your bank or business partner (in order to avoid a currency loss). Currency Rate Rate Factor The rate factor related to the home currency of the company. Planned Freight Value The value of the goods that are transported. The value in this field is filled from the aggregated freight value of the shipments of the current load. Shipment freight values are derived from the originating orders of the shipment lines. Planned Freight Value The value of the goods that are planned to be transported. The value in this field is filled from the aggregated freight value of the shipments of the current load. Shipment freight values are derived from the originating orders of the shipment lines. Shipped Freight Value The value of the goods that are shipped. The value in this field is filled from the aggregated freight value of the shipments of the current load. Shipment freight values are derived from the originating orders of the shipment lines. Estimated Freight Cost The estimated freight costs are derived from the carrier agreements maintained in the LN Pricing module, or they can be entered manually. If entered manually, the difference between the manually entered freight costs and the calculated freight costs are displayed in the Manually Added Cost field of the Freight Costs Inquiry (fmfrc0540m000) session. Actual Freight Cost The estimated freight costs set to Actual Cost Final for a load or a freight order cluster by the user, or the actual amount invoiced by a carrier to the shipping office to carry out the transportation of particular goods. Recalculate for Invoice Amount If this check box is selected, the freight cost amount must be recalculated manually due to partial deliveries or over-deliveries. Actual Cost Final If invoicing is based on a carrier invoice, this check box is selected automatically when the invoice from the carrier is matched and approved in Financials for all shipments of the load. If invoicing is not based on a carrier invoice, this check box is selected if you make the estimated costs actual and final. To make the estimated costs actual and final, on the appropriate menu, select Set Actual Cost--> Final. Invoicing is based on a carrier invoice if the Carrier Invoice check box is selected. Weight The aggregated weight of the goods included in the current load. Weight The weight unit used to express the aggregated weight of the goods in the current load. Volume The aggregated volume of the goods included in the current load. Volume The unit used to express the aggregated volume. Floor Space The aggregated floor space of the goods included in the current load. Floor Space The unit used to express the aggregated floor space. Remaining Weight Capacity The remaining weight capacity of the transport means group. This is the available capacity - used capacity. Remaining Volume Capacity The remaining volume capacity of the transport means group. This is the available capacity - used capacity. Remaining Floor Space Capacity The remaining area capacity of the transport means group. This is the available capacity - used capacity. Weight Capacity Utilization The weight capacity percentage that a vehicle of the selected transport means group utilizes to carry the load. Volume Capacity Utilization The volume capacity percentage that a vehicle of the selected transport means group utilizes to carry the load. Floor Space Capacity Utilization The floor space capacity percentage that a vehicle of the selected transport means group utilizes to carry the load. Weight The aggregated weight of the goods included in the current load after the goods are shipped. Volume The aggregated volume of the goods included in the current load after the goods are shipped. Floor Space The aggregated surface area of the goods included in the current load after the goods are shipped. Remaining Weight Capacity - Shipped The remaining weight capacity of the transport means group after the goods are shipped. This is the available capacity - used capacity. Remaining Volume Capacity - Shipped The remaining volume capacity of the transport means group after the goods are shipped. This is the available capacity - used capacity. Remaining Surface Area Capacity - Shipped The remaining surface area capacity of the transport means group after the goods are shipped. This is the available capacity - used capacity. Utilized Weight Capacity - Shipped The weight capacity percentage that a vehicle of the selected transport means group utilizes to carry the load after the goods are shipped. Utilized Volume Capacity - Shipped The volume capacity percentage that a vehicle of the selected transport means group utilizes to carry the load after the goods are shipped. Utilized Surface Area Capacity - Shipped The surface area capacity percentage that a vehicle of the selected transport means group utilizes to carry the load after the goods are shipped. Weight The aggregated weight of the goods included in the current load after the goods are delivered. Volume The aggregated volume of the goods included in the current load after the goods are delivered. Floor Space The aggregated surface area of the goods included in the current load after the goods are delivered. Available Weight Capacity The available weight capacity of a vehicle of the selected transport means group. Available Volume Capacity The available volume capacity of a vehicle of the selected transport means group. Available Floor Space Capacity The available area capacity of a vehicle of the selected transport means group. Carrier The carrier that is to transport the goods included in the current load. Note If you manually create a load, the Default Carrier from the Carriers by Shipping Office and Planning Group (fmfrc0160m000) session is taken as the default value for this field. Freight All Kinds Freight All Kinds is a special freight cost rating agreement with the carrier. If the carrier and the transport requestor agree on rating according to Freight all kinds, the official freight classes of the items will be substituted by the Freight All Kinds agreement. In LN, Freight all kinds is defined as special freight class. Carrier PRO Number The number given by the carrier to identify the load or shipment. The carrier uses this number for tracking purposes. Carrier Tracking Number Type The type of the tracking number specific to the carrier used to identify the load or shipment. Allowed values Note This field is enabled only if the Carrier Tracking Number is specified. Default value is Undefined if the Carrier Tracking Number is specified, otherwise Not Applicable. You cannot modify this value if the load status is Closed or Ignored, or if a carrier invoice related to the load is matched in the Accounts Payable module of the Financials package. Tracking Number The number provided by the transportation providers for the load or shipment. For example, an Air Waybill Number. This number is generated by the scanning devices or can be specified manually. Note You cannot modify this value if the load status is Closed or Ignored or if a carrier invoice is related to the load is matched in Financials ( Accounts Payable). Tracking Number Type The type of the tracking number assigned to the load or shipment by the transport providers, for tracking purpose. Allowed values Note This field is enabled only if the Tracking Number is specified. Default value is Undefined if the Tracking Number is specified, otherwise Not Applicable. You cannot modify this value if the load status is Closed or Ignored or if a carrier invoice is related to the load is matched in Financials ( Accounts Payable). Transport Means Combination If a transport means group is selected in the Transport Means Group field, you cannot select a transport means combination. If a carrier is inserted for the current freight order line, the transport means combination must be attached to this carrier. In the Transport Means Combinations by Carrier (fmfmd0144m000) session, you can attach transport means combinations to carriers. You cannot change the transport means combination if the load has any of the following statuses:
If delivery terms and a transport means combination is filled for the load, and the delivery terms stipulate that transport is to be by ship, the transport category of the transport means combination must be one of the following:
Transport Means Group The transport means group of the means of transport that is to transport the current load. For the transport means group selected in this field, the Independent Use Allowed check box must be selected. Note that if you select a transport means group, you cannot select a transport means combination. If a transport means combination is selected, you cannot select a transport means group. Means of Transport The means of transport that is to transport the load. You can select a Means of Transport that belongs to the transport means group defined for the current load. If no transport means group is selected for the load or if no means of transport is defined for the selected transport means group, this field is disabled. Transport Type The transport type of the transport means group. The value in this field is taken from the transport means group or the transport means combination of the current load. Combination Code The combination code of the transport means group. The value in this field is taken from the transport means group or the transport means combination of the current load. Piece Unit The piece unit for the items contained in the load. If a piece unit is filled for the transport means group or the transport means combination of the current load, the value in this field is taken from the transport means group or the transport means combination. Planned Distance The total planned distance covered by the load to travel from the first load address to the last unload address. Planned Distance The distance unit used to express the planned distance. Actual Distance The total planned distance covered by the load to travel from the first load address to the last unload address. You can enter the actual distance when the carrier has provided you with this information. Pieces The aggregated quantity expressed in piece units for the items contained in the load. Pieces The remaining capacity expressed in piece units for the transport means group. This is the available capacity - the used capacity. Pieces The piece unit capacity percentage that a vehicle of the selected transport means group utilizes to carry the load. Pieces The aggregated quantity expressed in piece units for the items contained in the load after the goods are shipped. Pieces The remaining capacity expressed in piece units for the transport means group after the goods are shipped. This is the available capacity - the used capacity. Pieces The piece unit capacity percentage that a vehicle of the selected transport means group utilizes to carry the load after shipment has taken place. Pieces The aggregated quantity expressed in piece units for the items contained in the load after the goods have been delivered. Pieces The available piece unit capacity of a vehicle of the selected transport means group. Travel Time The planned time required for the load to travel from the ship-from address of the first shipment of the load to the ship-to address of the last shipment of the load. The planned travel time is calculated by adding up the travel times of the shipments of the load. A load can have more than one shipment. Waiting Time The total planned waiting time spent at all addresses visited by the load. LN calculates the total planned waiting by adding the waiting times of the addresses of the shipments of the load. The waiting times of the addresses of the shipments are taken from the waiting times defined in the Addresses - Freight Management (fmfmd0110m000) session for the shipment addresses, or from the waiting times defined in the Freight Order Control Parameters (fmfoc0100m000) session. Visiting Time The total planned visiting time at all addresses visited by the load. The visiting time is the time spent waiting, loading, and/or unloading at an address. LN calculates the planned visiting time by adding up the visiting times of the addresses of the shipments of the loads. The visiting times of the addresses of the shipments are taken from the waiting times and the loading and/or unloading times defined in the Addresses - Freight Management (fmfmd0110m000) session for the shipment addresses, or from the waiting and loading and/or unloading times defined in the Freight Order Control Parameters (fmfoc0100m000) session. Start Date The date and time the load is actually loaded. This information is filled by the user after the actual date and time is known. You can use this information to compare the planned and the actual dates and times. End Date The date and time the load is actually unloaded. This information is filled by the user after the actual date and time is known. You can use this information to compare the planned and the actual dates and times. Travel Time The actual time required for the load to travel from the ship-from address of the first shipment of the load to the ship-to address of the last shipment of the load. A load can have more than one shipment. You can enter the actual travel time when the carrier has provided you with this information. Waiting Time The actual time required for the load to travel from the ship-from address of the first shipment of the load to the ship-to address of the last shipment of the load. A load can have more than one shipment. You can enter the actual travel time when the carrier has provided you with this information. Visiting Time The total actual visiting time at all addresses visited by the load. The visiting time is the time spent waiting, loading and/or unloading at an address. You can enter the actual visiting time when the carrier has provided you with this information. Plan The load plan to which the load belongs. Reference Load The reference load is the identification code of the corresponding load in Warehousing. Number groups for loads in Warehousing are different from those used in Freight. Subcontracted If this check box is selected, the subcontracting instructions are printed for the load. You can print the subcontracting instructions for the load by selecting Subcontracting Instructions on the Print submenu of the File menu. Ship-to Company The company for which the ship-to data is defined. For more information, refer to Shipment Building within Freight. Note Only applicable if the shipments linked to the load all have the same ship-to code and the order type of the orders in the shipment is Single Ship-to Code per Load. Ship-to Type ship-to type. For more information, refer to Shipment Building within Freight. Note Only applicable if the shipments linked to the load all have the same ship-to code and the order type of the orders in the shipment is Single Ship-to Code per Load. Ship-to Code ship-to code. For more information, refer to Shipment Building within Freight. Note Only applicable if the shipments linked to the load all have the same ship-to code and the order type of the orders in the shipment is Single Ship-to Code per Load. Ship-to Code The description or name of the code. Text If this check box is selected, additional information about the current load is available. Shipping Office The shipping office that handles the load. Planning Group An entity that is used to group freight order lines into shipments and loads or freight order clusters. Each freight order line is allocated to a planning group. Freight order lines with different planning groups cannot be in the same shipment, load, or freight order cluster. For example, all goods destined for Belgium are subdivided into planning group Belgium. From a hierarchical perspective, the planning group is one level below the shipping office. A shipping office has one or more planning groups. Freight orders are grouped into shipping offices, the underlying freight order lines are grouped into the planning groups of the shipping office. Single Order per Load If this check box is selected, a load can only contain shipment lines generated for (all warehouse order sets within) one and the same warehouse order. If kit handling is used, the load contains subkits that belong to the same topkit. Note LN retrieves the value from the Freight Orders (fmfoc2100m000) session. Single Ship-To Code per Load If this check box is selected, LN creates loads that have shipments for only one ship-to code. By default, the check box is clear. For more information, refer to Shipment Building within Freight. Note LN retrieves the value from the Freight Order Lines (fmfoc2101m000) session. Route Plan The route plan along which the load travels. Standard Route The standard route along which the load travels. Status The status of the load. Load The first free number of the load. This serves as the load identification.
Log Calculate Freight Cost Generates a report of the steps that are completed in the freight cost calculation process. The report shows the setup information used to retrieve a rate. The report is displayed at the end of the carrier/LSP selection and costing process. The report shows, for example, why a specific rate is used or why no rate is retrieved at all, why a certain carrier/LSP is selected, and so on. For more information, refer to Carrier selection and cost calculation in Warehousing Final Use this command to make the estimated freight costs of the load actual and final to indicate that no further changes to the freight cost are expected. If changes occur nevertheless, to undo this setting, on the appropriate menu, select Set Actual Cost--> Not Final. These options are available if the status of the load is Completed and invoicing is not based on a carrier invoice, that is, if the Carrier Invoice check box for the current load is cleared. For more information, refer to Invoicing methods and The invoicing process. Not Final Use this command to undo the Set Actual Cost--> Final setting. Print Loads Starts the Print Loads (fmlbd4400m000) session. By default, LN starts this session to print the report.
| |||
![[...]](../images/start_the_text_editor.gif){kind=small}
or
press Ctrl-T.