Warehouses (whwmd2500m000)

Use this session to view and maintain warehouses.

Note

Use the Maps section to view the location of the Address. You must select only one record at a time.

You can only use this session to view and maintain the warehouses that are defined for the current logistic company.

Every company must define at least one warehouse, otherwise orders cannot be processed.

Note

You can also define warehouses in the Warehouses (tcmcs0103s000) session. The current session provides data and settings in greater detail.

 

Warehouse
The warehouse code.
Enterprise Unit
The enterprise unit to which the warehouse belongs.
General
General
Warehouse Type
The type of warehouse indicates the purposes for which you can use the warehouse. The warehouse type also determines the data and settings that you can define for the warehouse.
Address
The address code of the warehouse.
Language
The language code of the company specified for the warehouse.
Operational Company
The operational company of the warehouse.
Financial Company
The financial company of the warehouse.
Warehouse Valuation Group
The warehouse valuation group of the warehouse.
Calendar Code
The calendar code of the warehouse. The calendar is used for lead time calculations.
Note

In some cases, the calendar of the warehouse address is used to calculate an order's delivery date.

Extra Intrastat Info
The default Extra Intrastat Info set for warehouse transfer orders from this warehouse.

For other warehouse orders, the default extra Intrastat information set is the extra Intrastat information set you specified for the sales office or purchase office in the Departments (tcmcs0165s000) session. You can change the extra Intrastat information set on the warehouse order lines.

Kanban ID Mask
The mask that is used to generate kanban identification numbers in the Warehouse - Item (whwmd2110s000) session.

If you do not specify a kanban ID mask in the current field, LN uses the kanban ID mask specified in the Kanban ID Mask field in the Master Data Parameters (whwmd0100s000) session.

If you did not specify a kanban ID mask in the current field session nor in the Master Data Parameters (whwmd0100s000) session, you cannot use kanbans.

Project
The project with which the warehouse is associated.
Project WIP Warehouse
If this check box is selected, the warehouse can be used to ship project-related deliverables to a business partner.

Use Planned Deliverables (tppdm7100m000) session to ship project-related deliverables:

  • From the project WIP warehouse to the business partner.
  • From the project site via project WIP warehouse to the business partner.
Note
  • If this check box is selected, the Inventory Valuation Method is set to Fixed Transfer Price (FTP).
  • If this check box is selected, the project-related inventory is financially accounted as part of the reconciliation group project (TP) WIP.

General
Locations
If this check box is selected, the warehouse uses locations. A warehouse can contain multiple inventory locations.
WMS Controlled
If this check box is selected, the warehouse is controlled by an external warehouse management system integrated with LN. Note that a financial warehouse cannot be WMS controlled.
Zero Receipt Allowed
If this check box is selected, you can confirm zero receipts.

If this check box is cleared, you can only confirm zero receipts if the following conditions are met:

  • You already received goods for the order line
  • The receipt line is a final receipt

To make a final receipt line, select the Final Receipt check box on the Warehouse Receipts (whinh3512m000) session.

Confirm Receipt as Final
If this check box is selected, the Final Receipt check box is automatically selected for all receipt lines of a purchase order line receipt after the last receipt line is confirmed. For the receipt lines, the Final Receipt check box is made read-only.

The setting of this check box applies to the current warehouse. The default value is taken from the Confirm Receipt as Final field in the Inventory Handling Parameters (whinh0100m000) session.

If this check box is selected, end users are not required to (re-) check the received items while confirming receipts and manually select the Final Receipt check box. This will speed up the receipt procedure, which can be important if large numbers of receipt transactions are involved. As an additional result, the possible situation that back orders are not created because a user forgot to select the Final Receipt check box is prevented. On the other hand, if checking the received items while confirming receipts is required for the current warehouse, you must clear this check box.

The only way to undo the automatic selection of the Final Receipt check box for an individual receipt is to adjust the receipt quantities in the Receipt Correction (whinh3121s000) session. This session requires specific authorization.

Note
  • If this check box is selected, and receipt confirmation must be blocked if the received quantities are not fulfilled according to the receipt tolerances, you must redefine the receipt tolerances either by changing the Block value to Warn, or by adjusting the quantities.
  • You can define receipt tolerances and blockings in the Receiving group box of the Item - Purchase Business Partner (tdipu0110m000) session.
Confirm on Scan
If this check box is selected, the receipt of the goods listed on an order line or handling unit is automatically confirmed when the order line or handling unit is linked to a receipt record. To link a handling unit or order line to a receipt record, use the Receive (Easy Entry) command in the Warehouse Receipts (whinh3512m000) session. For more information, refer to Receive (Easy Entry).

LN enables integrations with software supporting bar code reading devices. If such configurations are in place, a receipt line is automatically created, linked to a receipt, and confirmed by scanning a handling unit label in the warehouse.

Note

You cannot change the contents of a receipt line, such as the received quantities, after it has been confirmed. Therefore, it is recommended not to select this check box if changes to receipt lines may be required.

Include in Enterprise Planning
If this check box is selected, the transactions recorded for this warehouse are taken into account in the Generate Master Planning (cprmp1202m000) session and the Generate Order Planning (cprrp1210m000) session in Enterprise Planning. If this check box is cleared, any inventory on hand and planned warehouse transactions recorded for this warehouse will be ignored in the planning process. The inventory in this warehouse is also ignored when the ATP is checked upon entry of sales orders and quotations. You can use such a warehouse to store rejected items and other inventory that is not intended to fulfill item demand.
Note

This checkbox is cleared and cannot be changed if the Warehouse Type field is set to:

  • Project
  • Service Customer Owned
  • Service Reject
  • Consignment (Owned)
Note
  • If you change this check box from cleared to selected, the transactions recorded for this warehouse are included in the next regenerative run. A net-change run will not take this warehouse's transactions into account, because the system does not set the net-change flag.
  • Before you can clear this check box, you must first delete any existing planned order recorded for this warehouse. No plan item must use this warehouse as its default warehouse in the Items - Planning (cprpd1100m000) session or the Items - Planning Defaults (cprpd1110m000) session.
  • If you select this check box for a warehouse of type Service, the effects are:

    • The order-planning process takes the service requirements into account.
    • Planned production orders can consume the inventory in the warehouse.

    The first effect is usually intended, the second effect can be an undesired side-effect. To avoid that planned production orders consume inventory in a service warehouse, you can assign the service warehouse and the production warehouse to two different clusters.

Default value

If the Warehouse Type field is Normal, Shop Floor, or Consignment (Not Owned), the check box is selected by default. If the Warehouse Type field is Service, the check box is cleared by default.

Quarantine Inventory
If this check box is selected, LN stores rejected inventory in the warehouse. If the warehouse is location controlled, you must also specify a quarantine location. If a reject location exists, LN stores rejected goods in the quarantine location.

The rejected goods are stored in the warehouse or in the quarantine location at the moment of rejection. The rejected goods do not have a value.

If this check box is cleared, LN removes rejected goods from inventory. As a result, the rejected goods no longer exist. The rejected goods are removed from inventory at the moment of rejection.

If the current check box is selected and rejected inventory is stored in the warehouse, the check box is read-only.

Use Handling Units in Rejected Inventory
If this check box is selected, you can move handling units to rejected inventory.

To use handling units in rejected inventory, for the relevant warehouses also select the Rejected Inventory check box.

Block During Warehouse Cycle Counting
If this check box is selected, the stock point is blocked for cycle counting.

Default value

The check box is selected, if the Block During Warehouse Cycle Counting check box is selected in the Inventory Handling Parameters (whinh0100m000) session.

Process Inventory Variances Automatically
If this check box is selected, LN processes inventory variances automatically.
Blockings
Blocked for Inbound
If this check box is selected, confirming receipts is blocked for the current warehouse. The remaining inbound steps, such as generate and release inbound advice, printing and confirming storage lists, and put away stock (for goods already received) is allowed.
Blocked for Outbound
If this check box is selected, the following steps of the outbound and shipment procedures are blocked: Generate Outbound Advice, Release Outbound Advice Pick and Confirm Shipments will be blocked. The steps: Generate Picking List and Print Shipping documents are allowed. Assembly, adjustment and internal inventory movement are also not blocked.
  • Generate outbound advice
  • Release outbound advice
  • Picking
  • Confirm shipment

The following steps are allowed:

  • Generate picking list
  • Print shipping documents

Assembly, internal inventory movements and inventory adjustments are also allowed.

Reason for Blocking
The reason code indicating why the warehouse is blocked for inbound or outbound movements.
Default Item Warehouse Status
Default Item Warehouse Status
Use this field to indicate the default value of the Item Warehouse Status field in the Warehouse - Item (whwmd2510m000) session for automatically generated item/warehouse combinations.

Item/warehouse combinations are automatically generated in the Warehouse - Item (whwmd2510m000) session when:

  • Starting from the Item - General (tcibd0101s000) session, item ordering data is created in the Item - Ordering (tcibd2100s000) session and item warehousing data is created in the Item - Warehousing (whwmd4100s000) session.
  • An order is created for an item/warehouse combination that is not available in the Warehouse - Item (whwmd2510m000) session.
Note

If the default Default Item Warehouse Status is Tentative and you want to use the item/warehouse combination in an order, you must manually change the status to Active in the Warehouse - Item (whwmd2110s000) session.

Supply System Defaults
Supply System
The default supply system.

Allowed values

Supply System

Supply from Warehouse
If this check box is selected, supply must take place from a warehouse.

Supply will take place from the warehouse as specified in the Supply Warehouse field of the current session. The field is disabled when the supply system is set to the option None.

Supply Company
The default logistic company. The warehouse in the Supply Warehouse field belongs to this company.

The field is disabled when the supply system is set to the option None or when the Supply from Warehouse check box is clear.

Supply Warehouse
The warehouse that supplies goods and materials to the shop floor warehouse.

Note

  • The field is disabled when the supply system is set to the option None or when the Supply from Warehouse check box is clear.
  • The warehouse and the supply warehouse must not be the same.
  • The supply warehouse must exist in the supply company.
  • The supply warehouse must be of type Normal, Shop Floor, Service or Consignment (not owned)
  • The warehouse and the supply warehouse must have the same buy-from BP.
Relationships
Inventory Management
Inventory Management
If this check box is selected, LN manages the inventory of the current warehouse.

If this check box is cleared, inventory of the selected warehouse is managed by an external party such as a supplier, a customer, or a logistics service provider (LSP). In addition:

This check box is cleared for the following types of warehouses:

This check box is selected for the following types of warehouses:

Business Partner
The business partner who carries out warehouse management for the current warehouse, for example, a supplier or a logistics service provider (LSP). This field is available if the Inventory Management check box is cleared.

If the current warehouse is a financial warehouse, this field displays the internal business partner of the warehouse to which the current warehouse is linked. Note, however, that this internal business partner is not always the business partner who carries out inventory management for the warehouse to which the financial warehouse is linked.

In the Financial Warehouses by Warehouse (tcmcs1103m000) session, you can link financial warehouses to a non-financial warehouse.

Note

This field is enabled only if the Inventory Management checkbox is cleared.

Manual Inbound Process Allowed
If this check box is selected, your organization carries out warehouse management for the current warehouse.

If this check box is cleared, warehouse management for the current warehouse is carried out by an external party such as a supplier, a customer, or a logistics service provider (LSP). In addition:

This check box is cleared for the following types of warehouses:

This check box is selected for the following types of warehouses:

Note

This field is enabled only if the Inventory Management checkbox is cleared.

Manual Outbound Process Allowed
If the value in this field is Yes, you are allowed to carry out the following manual outbound processes even if inventory management is carried out by a party other than your own company :
  • Generating outbound advice
  • Outbound inspection of goods
  • Picking goods
  • Shipping goods

If the value in this field is No, the manual outbound processes are not allowed. In addition, all outbound activities of warehousing procedures related to the current warehouse are performed automatically, and various activities are unavailable. For more information, refer to Activities by Outbound Order Line (whinh2124m000).

This field is available if the Inventory Management check box is cleared and the current warehouse is not a financial warehouse.

If the current warehouse is a financial warehouse, this field is read-only and the value is Not Applicable. If the current warehouse is a consignment owned, this field is read-only and the value is No.

Note

This field is enabled only if the Inventory Management checkbox is cleared.

Manual Adjustments Allowed
If the value in this field is Yes, you are allowed to carry out manual inventory adjustments even if inventory management is carried out by a party other than your own company.

If the current warehouse is a financial warehouse, this field is read-only and the value is Not Applicable. If the current warehouse is a consignment owned, this field is read-only and the value is Yes.

This field is available if the Inventory Management check box is cleared.

Note

This field is enabled only if the Inventory Management checkbox is cleared.

Manual Cycle Counting Allowed
If the value in this field is Yes, you are allowed to carry out manual cycle counts even if inventory management is carried out by a party other than your own company.

If the current warehouse is a financial warehouse, this field is read-only and the value is Not Applicable. If the current warehouse is a consignment owned, this field is read-only and the value is Yes.

This field is available if the Inventory Management check box is cleared.

Note

This field is enabled only if the Inventory Management checkbox is cleared.

Ownership
Usage at Warehouse Transfer
The issue of goods for a warehouse transfer is a usage, resulting in a change of ownership: Usage at warehouse transfer
Site
External Site
This field shows whether the current warehouse belongs to your company. If the value in this field is Yes, the warehouse belongs to another company. If the value is No, the warehouse belongs to your company. If the value is Not Applicable, the warehouse is a financial warehouse.
Note

If the warehouse type for the current warehouse is Consignment (Owned), this field is read-only and the value in this field is Yes.

Business Partner
The business partner who owns the warehouse, but not necessarily the inventory. If the warehouse is a consignment warehouse, this is usually the ship-to business partner or a logistics service provider.
Note

This field is enabled only if External Site field is set to Yes.

Cluster
The cluster of the warehouse.

Related topics

Business Partner
Buy-from
The supplier from whom the goods in the current warehouse are bought. Usually, the supplier is the owner of the goods. The supplier can also be responsible for warehouse management and/or supply planning.

Purchase orders with other buy-from business partners cannot be processed through the current warehouse.

This field is available if the warehouse type of the current warehouse is:

  • Normal
  • Consignment (Not Owned)
  • Service
  • Shop Floor
  • Project
Sold-to
The current warehouse is used to handle goods sold or to be sold to the selected sold-to business partner. Goods from the current warehouse are exclusively to be sent to this business partner. Therefore, sales orders or service orders with other sold-to business partners cannot be processed through the current warehouse.

Typically, a sold-to business partner is selected if the current warehouse is an administrative warehouse in a supplier's system. The supplier uses the administrative warehouse to monitor and/or plan inventory that he owns on behalf of the customer, that is, the sold-to business partner. The customer becomes the owner when he consumes the goods.

This field is available if the warehouse type of the current warehouse is:

  • Normal
  • Consignment (Owned)
  • Service
  • Shop Floor
Ship-from
Goods in the current warehouse have been shipped from this business partner or have been manufactured or assembled internally. Therefore, purchase orders with other ship-from business partners cannot be processed through the current warehouse.

This field is available if the warehouse type of the current warehouse is:

  • Normal
  • Consignment (Not Owned)
  • Service
  • Shop Floor
  • Project
Ship-to
Goods from the current warehouse are exclusively to be sent to this business partner or are used internally. Therefore, sales orders or service orders with other ship-to business partners partners cannot be processed through the current warehouse.

This field is available if the warehouse type of the current warehouse is:

  • Normal
  • Consignment (Owned)
  • Service
  • Shop Floor
Locations
Location
Multi-Item Locations
If this check box is selected, you can store items of various types in the locations of this warehouse. For each warehouse, you must indicate the default selection for which different items can be mixed in the locations in the warehouse.
Note

The selection of this check box serves as the default selection for the locations in this warehouse. This default value can be overruled for a location in the Multi-Item Locations field in the Warehouse - Location (whwmd3100s000) session.

Note

In combination with the Multi-Lot by Item Locations field, four variants are possible:

  • Different items and different lots of each item are allowed.
  • Different items are allowed, but only one lot of each item.
  • Only one item is allowed at the location, but of this item, more than one lot can be stored.
  • Only one lot of one item is allowed at the location.
Multi-Lot by Item Locations
If this check box is selected, different lots for one item can be stored in one location.

If this check box is cleared, you can only store one lot of a specific item.

The selection of this check box serves as the default selection for new locations added to this warehouse. You can overrule this default value for a location in the Multi-Lot by Item field in the Warehouse - Location (whwmd3100s000) session.

Note

In combination with the Multi-Item Locations field, four variants are possible:

  • Different items and different lots of each item are allowed.
  • Different items are allowed, but only one lot of each item.
  • Only one item is allowed at the location, but of this item, more than one lot can be stored.
  • Only one lot of one item is allowed at the location.
Use Only Unoccupied Dock Locations
If this check box is selected, LN allocates a new dock location if the first selected dock location is already occupied. For more information, refer to Dock locations - search criteria
Receiving Location
The default receiving location of the warehouse.

Receiving locations must first be created in the Warehouse - Location (whwmd3100s000) session.

Note
  • You can only maintain this field if your warehouse is subdivided in locations.
  • Locations that are entered here, cannot be blocked in the Warehouse - Location (whwmd3100s000) session for the main type of transaction. Before you can block a location, you must first define a new location of the same type and link that to the warehouse.
Staging Location
The default staging location of the warehouse. A staging location must first be created in the Warehouse - Location (whwmd3100s000) session.
Note
  • You can only maintain this field if your warehouse is subdivided in locations.
  • Locations that are entered here, cannot be blocked in the Warehouse - Location (whwmd3100s000) session for the main type of transaction. Before you can block a location, you must first define a new location of the same type and link that to the warehouse.
Quarantine Location
The default quarantine location of the warehouse.

You can only specify a reject location:

  • If the Handle Rejected Goods check box on the current session is selected.
  • If the Locations check box on the current session is selected.
  • If a location of type Inspection is specified for the warehouse.
Note
  • If a reject location is specified in the current field and rejected inventory is available in this location, the current field is disabled.
  • Locations that are entered here, cannot be blocked in the Warehouse - Location (whwmd3100s000) session for the main type of transaction. Before you can block a location, you must first define a new location of the same type and link that to the warehouse.
Generate Inbound Advice
Default Location Type for Inbound Advice
The type of location to which te received items are preferably advised.
Note
  • Locations of types Bulk and Pick have higher priority for inbound advice.
  • The value of the current field serves as default for the value of the Default Location Type for Inbound Advice field in the Warehouse - Item (whwmd2110s000) session.
Minimum % Free for Inbound Advice
The minimum free capacity percentage of a location to be considered for inbound advice.
Use Only Unoccupied Locations when Generating Inbound Advice
If this check box is selected, the Generate Inbound Advice (whinh3201m000) session only advises unoccupied locations when you generate inbound advice for the current warehouse. If you clear this check box, LN advises both occupied and unoccupied locations with available capacity.

An occupied location is one at which inventory has been registered or at which capacity has been allocated as a result of inbound movement (advised or manually created).

Ignore Expected Decrease of Location Occupation
If this check box is selected, LN ignores the expected occupation decrease of the locations of the current warehouse when determining the available storage capacity. LN determines the storage capacity while generating inbound advice. If this check box is cleared, LN adds the expected occupation decrease to the available storage capacity when generating inbound advice.

The expected occupation decrease of a location is the quantity, weight, floor space and/or volume by which a location’s capacity is expected to be decreased based on the outbound advice generated for the location. When outbound advice is generated, the expected occupation decrease increases, and it decreases when outbound advice is released or the picking list is confirmed, if picking lists apply. The expected occupation decrease is displayed in the Warehouse - Location - Capacity (whwmd3101s000) session.

Note

This check box is available if:

  • The warehouse is location-controlled. A warehouse is location-controlled if the Locations check box is selected.

  • The Use Only Unoccupied Locations check box is cleared.

Use Free (Unfixed) Locations when Generating Inbound Advice
If this check box is selected, all locations are considered when generating inbound advice in the Generate Inbound Advice (whinh3201m000) session. If this check box is cleared, LN only takes fixed locations into consideration for advice.
Note

In the Fixed Locations (whwmd3502m000) session, you can record whether a location is a fixed or a free (that is, non-fixed) location for the item.

Allow Other Items on Fixed Multi-Item Locations
If this check box is selected, LN allows you to define a default value for the Allow Other Items field in the Warehouse - Locations (whwmd3500m000) session, for every location-controlled warehouse.

LN allows you to define a fixed location for the item in the Fixed Locations (whwmd3502m000) session. A fixed location can be a multi-item location with different items and for each item, the location is defined as fixed location. The fixed locations are used for inbound advice and replenishment location matrix.

When an inbound advice is generated, LN checks for a fixed location for the item:

  • If found, LN generates an inbound advice from receiving location to the fixed location.
  • If not found, LN generates an inbound advice from receiving location to a free (non-fixed) location.

Note

LN defaults the value only when you define a multi-item location as a fixed location for an item in the Fixed Locations (whwmd3502m000) session.

LN allows you to generate an inbound advice to a fixed multi-item location which is not defined as a fixed location for the item.

Lead Times
Lead Times
Inbound Lead Time
The time interval between the arrival of the items and the actual storage in the warehouse.

The inbound lead time in the current field is used as the default inbound lead time for a new item/warehouse combination that is specified in the Warehouse - Item (whwmd2110s000) session.

Inbound Lead Time
The unit in which the inbound lead time is expressed.
Outbound Lead Time
The time interval between taking the items out of the warehouse and the departure of the carrier on which the items are placed.

The outbound lead time in the current field is used as the default outbound lead time for a new item/warehouse combination that is specified in the Warehouse - Item (whwmd2110s000) session.

Outbound Lead Time
The unit in which the outbound lead time is expressed.
Cross-dock Lead Time
The time interval, defined in hours or days, between receiving the goods on the receiving location until the moment the goods leave the warehouse from the staging location. It includes the normal waiting times on the receiving location and/or staging location, and inspection time.
Note

You can define cross-dock lead times for warehouses and/or item-warehouse combinations.

The cross-dock lead time in the current field is used as the default cross-dock lead time for a new item/warehouse combination that is specified in the Warehouse - Item (whwmd2110s000) session.

Cross-dock Lead Time
The unit in which the cross-dock lead time is expressed.
Handling Units
Use Handling Units in
Handling Units in Use
If this check box is selected, handling units are used for the current warehouse.

If the item is a configurable purchased item, you must select this field.

Optional fields

  • Receipts
  • Inbound Inspections
  • Inventory
  • Outbound Inspections
  • Shipments

For more information, refer to:

Use Handling Unit in Receipt
If this check box is selected, handling units are used in receipts taking place in the current warehouse.
Use Handling Unit in Inbound Inspection
If this check box is selected, handling units are used in inbound inspections taking place in the current warehouse.
Use Handling Unit in Inventory
If this check box is selected, handling units are used in inventory in the current warehouse.
Use Handling Unit in Outbound Inspection
If this check box is selected, handling units are used in outbound approvals in the current warehouse.
Use Handling Unit in Shipment
If this check box is selected, handling units are used in shipment processes carried out in the current warehouse.
Outbound
Advise Alternative Package Definition Allowed
If this check box is selected, LN enables you to generate advice for the inventory for different package definitions or without package definitions.
Note

If this check box is cleared, only the package definitions defined on the outbound order line is used in searching inventory for outbound advice.

Note

This option is not valid for the package definitions of the type Fixed are ordered. When fixed package definitions are ordered, only fixed type of package definitions are used in searching inventory for outbound advice.

Generate Handling Unit for Shipment Header during Picking
If this check box is selected, handling units are generated automatically when the picks are confirmed. The handling units are generated based on relevant package definitions/handling unit templates.
Consolidate Handling Units in one Shipment Line during Picking
If this check box is selected, multiple handling units picked for a specific outbound line are linked to one shipment line during the confirmation of the picking.

If this check box is cleared, separate shipment lines are generated for each handling unit during the confirmation of the picking.

Note

This parameter is relevant in case handling units are in stock and picked from stock. The parameter is not so relevant when handling units are (automatically) created during the confirmation of the picking.

For more information, refer to Generate Handling units automatically.

Generate Handling Units Automatically during
Confirm Receipts
The settings that control automatic generation of handling units from receipts of goods received in the current warehouse.
Note

The value of the Confirm Receipts field of the Warehouse - Item (whwmd2110s000) session overrules the value in this field.

Generate Handling Unit Automatically during Projected Shipments
If this field is set to Yes, handling units are generated automatically when projected shipments are created.
Note

By default, this field is set to Yes, if:

  • Handling Units in Use check box is selected in Master Data Parameters (whwmd0100s000) session.
  • Use Handling Unit in Shipment check box is selected.

This field is enabled only if Projected Shipments in use check box is selected in the Inventory Handling Parameters (whinh0100m000) session.

Confirm Picking
Select Yes if automatic generation of handling units is required after the outbound advice is released for items that are issued from the current warehouse, otherwise select no No.
Note
  • For this setting to work, handling units must be in use for the current warehouse.
  • The value of the Confirm Picking field of the Warehouse - Item (whwmd2110s000) session overrules the value in this field.
Process Adjustment Orders
Note

The value of the Process Adjustment Orders field of the Warehouse - Item (whwmd2110s000) session overrules the value in this field.

Process Cycle Counting Orders
Note

The value of the Process Cycle Counting Orders field of the Warehouse - Item (whwmd2110s000) session overrules the value in this field.

Mask Settings
Internal Handling Unit Mask
The mask that is used to generate a code for a handling unit for internal use in a warehouse.
Outbound Handling Unit Mask
The mask that is used to generate a code for a handling unit to be shipped.
Outbound Handling Unit Mask According to SSCC
If this check box is selected, the outbound handling unit mask is according to the serial-shipping container code (SSCC) standards.

An SSCC consists of 18 digits which are subdivided in the following way:

  • Position 1 : packaging indicator (usually 3)
  • Position 2-8 : company prefix number (according to EAN standards)
  • Position 9-17: serial number (allocated by the company coding the unit)
  • Position 18 : check digit (according to EAN standards)

According to the above mentioned subdivision, you can create a mask for SSCC with the following mask segments:

  • Segment 1: segment type = Alphanumeric and segment length = 1
  • Segment 2: segment type = Alphanumeric and segment length = 7
  • Segment 3: segment type = Sequence and segment length = 9

Segment 4, check digit, with segment type Alphanumeric and segment length 1 is not modeled by the user. LN checks if the mask has 17 positions, and adds the 18th digit when creating a handling unit identification code.

You can create masks in the Masks (tcibd4102m000) session. You can create mask segments in the Mask Segments (tcibd4103s000) session.

Labels
Automatic Label Printing
Creation ASN
If this check box is selected, labels are printed automatically while handling units are created from ASNs.
Printing Method for creation ASN
You can print the labels while creating ASN, based on the following options:
  • By Line: Labels are printed by line.
  • By Unit: Labels are printed for each unit on the line.
Number of Copies
The number of labels to be printed for each handling unit created from an inbound ASN.
Label Printed by during Creation ASN
LN allows you to specify the application that must be used to print labels for the defined layout when the ASN is created.

Allowed values

Label Printed by

Note

Default value is Infor LN.

The value External application is not applicable when the packaging label BOD is not implemented.

Confirm Receipts
If this check box is selected, labels are printed automatically while receipts for handling units are confirmed.
Printing Method for Confirm Receipts
You can print the labels when the receipts are confirmed, based on the following options:
  • By Line: Labels are printed by line.
  • By Unit: Labels are printed for each unit on the line.
Number of Copies
The number of labels to be printed for each handling unit for which a receipt is confirmed.
Label Printed by during Confirm Receipts
LN allows you to specify the application that must be used to print the labels for the defined layout when the receipts are confirmed.

Allowed values

Label Printed by

Note

Default value is Infor LN.

The value External application is not applicable when the packaging label BOD is not implemented.

Confirm Picking
If this check box is selected, labels are printed automatically while outbound handling units are released.
Printing Method for Confirm Picking
You can print the labels when the picking is confirmed, based on the following options:
  • By Line: Labels are printed by line.
  • By Unit: Labels are printed for each unit on the line.
Number of Copies
The number of labels to be printed for each handling unit for which picking is confirmed.
Label Printed by during Confirm Picking
LN allows you to specify the application that must be used to print the labels for the defined layout when the picking is confirmed.

Allowed values

Label Printed by

Note

Default value is Infor LN.

The value External application is not applicable when the packaging label BOD is not implemented.

Process Adjustment Orders
If this check box is selected, labels are printed automatically while adjustment orders are processed.
Number of Copies
The number of labels to be printed for each handling unit for which adjustment orders are processed.
Label Printed by during Process Adjustment Orders
LN allows you to specify the application that must be used to print the labels for the defined layout when the adjustment orders are processed.

Allowed values

Label Printed by

Note

Default value is Infor LN.

The value External application is not applicable when the packaging label BOD is not implemented.

Process Cycle Counting Orders
If this check box is selected, labels are printed automatically while cycle counting orders are processed.
Number of Copies
The number of labels to be printed for each handling unit for which cycle counting orders are processed.
Label Printed by during Process Cycle Counting Orders
LN allows you to specify the application that must be used to print the labels for the defined layout when the cycle counting orders are processed.

Allowed values

Label Printed by

Note

Default value is Infor LN.

The value External application is not applicable when the packaging label BOD is not implemented.

Default Label Layout
Inbound
Zoom to the Label Layouts (whwmd5520m000) session to select the default label layout for received handling units.
Outbound
Zoom to the Label Layouts (whwmd5520m000) session to select the default label layout for handling units that are to be issued from the warehouse.
Adjustments
Zoom to the Label Layouts (whwmd5520m000) session to select the default label layout for handling units for which inventory adjustments are carried out.
Cycle Counting
Zoom to the Label Layouts (whwmd5520m000) session to select the default label layout for handling units for which cycle counting is carried out.
Miscellaneous
Automatic Labeling of Multi-Item Handling Unit
If this check box is selected, LN automatically labels all (parent and child) handling unit levels of a multi-item handling unit.

When a labeled single-item parent handling unit, which has non-labeled child handling units, is changed into a multi-item handling unit, and the Automatic Labeling of Multi-Item Handling Unit check box is selected, LN automatically marks all its child handling unit levels as labeled. Only the multi-item handling units and single-item handling units which are linked to a multi-item parent handling unit are marked as labeled. if the multi-item handling unit is subsequently reversed to a single item handling unit, so the compose action which created the multi-item handling unit is reversed, the child handling units will remain labeled. If desired, you must manually change the child handling units into non-labeled handling units. Examples of Changing Handling Units (Single Item<=> Multi-Item)

For more information, refer to the Multi-Item Label Layout field in the Handling Units (whwmd5130m000) session.

Dynamic Cross-docking
Dynamic Cross-docking
Dynamic Cross-docking
If this check box is selected, dynamic cross-docking is possible in this warehouse.
Note
  • This field can only be selected if, in the Inventory Handling Parameters (whinh0100m000) session, the Dynamic Cross-docking check box is selected.
  • If a cross-dock order exists for this warehouse, you cannot clear this check box.

Related topics

Generate Cross-dock Order for Outbound Advice Shortage
If this check box is selected, and, after generating an outbound advice, an inventory shortage occurs, a cross-dock order is created for the inventory shortage.
Note

In the Generate Outbound Advice (whinh4201m000) session, you can still select or clear this check box. However, if you generate an outbound advice directly, for example, from within the Outbound Order Lines (whinh2120m000) session, this option applies to the warehouse-item level ( Warehouse - Item (whwmd2510m000)/ Warehouse - Item (whwmd2110s000)).

Generate Cross-dock Order Lines when Confirming Receipt
If this check box is selected, LN checks if there are any open cross-dock orders that must be fulfilled by incoming goods.
Note

Before confirm receipt takes place, you can overrule this setting by either selecting or clearing the Generate Cross-dock Order Lines when Confirming Receipt check box in the Receipt Lines (whinh3112s000) session.

Automatically Approve Cross-dock Order Lines
If this check box is selected, and cross-dock order lines are generated, these inbound order lines will immediately receive the status Approved.
Important!

It is strongly recommended to select this option, if both of the following applies:

  • The Generate Cross-dock Order Lines when Confirming Receipt check box is selected.
  • The warehouse and/or the item is not location controlled.
Priority Definition
A user-defined set of priorities assigned to one or more LN table fields. LN uses the cross-dock order priority definition to generate the cross-dock order system priority.
Note
  • You can use cross-dock order priority definitions for Dynamic cross-docking only.
  • Instead of cross-dock order priority definitions, and dependent on a parameter setting, you can apply planning priority rules to Dynamic cross-docking.
Note
  • The default value is the value as defined in the Inventory Handling Parameters (whinh0100m000) session.
  • If this field is empty when creating a cross-dock order, the cross-dock order priority definition will be retrieved from the Inventory Handling Parameters (whinh0100m000) session.
Restriction Definition
A user-defined set of rules that LN uses to determine whether to create cross-dock orders. The rules are checked one after the other. If a valid condition is met, no cross-dock orders will be created. If no rule applies, LN permits creation of cross-dock orders. Cross-dock restriction rules are taken into account regardless of the use of direct material supply.
Generate Cross-dock Order when Releasing Order to Warehousing
Generate Cross-dock Order when Releasing Order to Warehousing
Indicates the conditions that govern the generation of cross-dock orders, when an issue order is released to Warehousing. The value in the field is defaulted from the Inventory Handling Parameters (whinh0100m000) session.

To enable this field, you must select the Dynamic Cross-docking check box. If you clear the Dynamic Cross-docking check box, the Generate Cross-dock Order when Releasing Order to Warehousing field is set to Never.

Cross-docking Time Fence
Minimum Time Fence Tolerance
The minimum and maximum time fence tolerances for the receipt date.
Minimum Time Fence Tolerance
The minimum and maximum time fence tolerances for the receipt date.
Maximum Time Fence Tolerance
The minimum and maximum time fence tolerances for the receipt date.
Maximum Time Fence Tolerance
The minimum and maximum time fence tolerances for the receipt date.
Force Cross-docking Range
Force Cross-docking Range
If the receipt quantity of the receipt line is between the minimum and maximum quantities specified, LN will look for demand and try to cross-dock the goods accordingly.
Direct Material Supply (DMS)
Direct Material Supply
DMS Supplied
If this check box is selected, this warehouse can be supplied via direct material supply (DMS). In other words: netted demand from the warehouse will be taken into account when carrying out a DMS run for a warehouse within the same warehouse supply structure. The DMS run can take place for this warehouse or another warehouse within the same cluster.
DMS upon Receipt
Indicates whether DMS will be carried out in this warehouse after receipt of goods and, if so, in what way.
DMS upon SFC Receipt
Indicates whether DMS will be carried out in this warehouse after receipt of manufactured goods and, if so, in what way.
DMS on Inventory
Indicates whether DMS will be applied to available on-hand inventory in this warehouse and, if so, in what way.

The setting of this parameter also indicates whether stock must be taken into account to meet demand from other (SFC) warehouses based on planning priorities, when goods are stored in the warehouse.

Planning Horizon for DMS upon Receipt
The planning horizon of the destination warehouse when running DMS upon receipt in the supply warehouse. For more information, refer to DMS planning horizon.
Planning Horizon for DMS on Inventory
The planning horizon of the destination warehouse when running DMS on inventory in the supply warehouse. For more information, refer to DMS planning horizon.
Print Direct Material Supply Label
If this check box is selected, LN will print labels when DMS is carried out.
Direct Material Supply Label Layout
The label layout to be used for DMS.
Print Direct Material Supply Transfer Report
If this check box is selected, LN will print a report listing all created transfer orders and related cross-dock orders.
Demand Type for DMS upon Receipt
DMS upon Receipt Demand Type
If this check box is selected, this demand type is included in the current selection.
Warehousing Orders from Status
The warehousing orders that must be included in the receipt demand type. Relevant warehousing orders with equal or higher statuses than the selected status are included in the DMS receipt demand type.

The following options are available:

  • This is the lowest warehousing order status. Therefore, all relevant warehousing orders are included in DMS demand type receipt.
  • Only relevant warehousing orders with status Planned are excluded from DMS demand type receipt.
  • Only relevant warehousing orders with status Planned or Open are excluded from DMS demand type receipt.

Related topics

Demand Type for DMS on Inventory
DMS on Inventory Demand Type
If this check box is selected, this demand type is included in the current selection.
Warehousing Orders from Status
The warehousing orders that must be included in the inventory demand type. Relevant warehousing orders with equal or higher statuses than the selected status are included in the DMS inventory demand type.

The following options are available:

  • This is the lowest warehousing order status. Therefore, all relevant warehousing orders are included in DMS demand type inventory
  • Only relevant warehousing orders with status Planned are excluded from DMS demand type inventory.
  • Only relevant warehousing orders with status Planned or Open are excluded from DMS demand type inventory.

Related topics

Shipments
Generate Shipments
Generate Shipments
This field determines the way the time interval of a shipment is set when a new shipment is created. The shipment's time interval is the time between the dates and times in the Shipment Date/Time From field and the Shipment Date To field in the Shipments (whinh4130m000) session.

Based on the time interval:

  • LN automatically adds outbound-order lines to the shipment.
  • You can manually add outbound-order lines to the shipment.

When shipments are generated, LN determines the default values for the Shipment Date/Time From and Shipment Date/Time To fields based on the value of the current field.

Current field Shipment Date/Time From Shipment Date/Time To
Per Exact Planned Delivery Date/TimeThe outbound-order line's exact planned delivery date and time.The outbound-order line's exact planned delivery date and time.
For Planned Delivery DateThe outbound-order line's planned delivery date with time 0:00.The outbound-order line's planned delivery date with time 23:59:59.
Up to and Incl. Planned Delivery Date-The latest planned delivery date present on the corresponding outbound advice with time 23:59.
Within Time IntervalShipment Date From = Shipment Creation Date - Minimum Shipment Interval (in hours or calendar days)Shipment Date To = Shipment Creation Date + Maximum Shipment Interval (in hours or calendar days)

 

Within Time Interval

Note
  • The Within Time Interval option is not available in case of financial warehouses.

  • If the Unique Shipment Reference per Shipment criteria is selected in the Warehousing Order Types (whinh0110m000) session, the shipment interval is set based on the earliest planned delivery date and the latest planned delivery date of the corresponding outbound order lines, which contain the unique reference. This criteria overrules all the other criteria, including the shipment interval.

  • You can add shipment lines for the same customer to a shipment that already exists on a staging location, only if the status of the shipment is not Frozen or Confirmed.

  • If the time interval is expressed in calendar days, the shipment dates must be rounded off to entire calendar days, starting at 00:00:00 AM and ending at 23:59:59 PM.

Shipment Date Interval
Minimum Shipment Interval
The user specified number of hours/days which is used to calculate the shipment date from which new shipment lines can be added from later outbound runs.
Shipment Date From = Shipment Creation Date - Minimum Shipment Interval (in hours or calendar days)
Note
  • The field is available only when the Within Time Interval option is selected.

  • The field is available only when the Planned Delivery Date option in the Add Orders Based On field is selected.

  • The field is not valid in case the value is less than zero.

Minimum Shipment Interval Unit
The unit in which the minimum shipment interval is measured. Example hours or calendar days.
Note

If the time interval is expressed in calendar days, the shipment dates must be rounded off to entire calendar days, starting at 00:00:00 AM and ending at 23:59:59 PM.

The field is available only when the Within Time Interval option is selected.

Maximum Shipment Interval
The user-specified number of hours/days which is used to calculate the shipment date until which new shipment lines can be added from later outbound runs.
Shipment Date To = Shipment Creation Date + Maximum Shipment Interval (in hours or calendar days)
Note
  • The field is available only when the Within Time Interval option is selected.

  • The field is not valid in case the value is less than zero.

Maximum Shipment Interval Unit
The unit in which the maximum shipment interval is measured. Example hours or calendar days.
Note

If the time interval is expressed in calendar days, the shipment dates must be rounded off to entire calendar days, starting at 00:00:00 AM and ending at 23:59:59 PM.

Add Orders Based On
The shipment selection criteria based on which the new shipments are linked to already existing shipments. When new orders are picked, LN must determine if the orders fall within the shipment interval. You can set the criteria based on which the shipment interval can be matched against the planned delivery date of the order or against the time of picking of the order. The orders that fall within this shipment interval can be added to an existing shipment.

You can select from the following available criteria:

  • Time of Picking

    If the time when the picking list is confirmed falls within the shipment interval, the order line is linked to the existing shipment. Otherwise, a new shipment is created.

  • Planned Delivery Date

    If the planned delivery date falls within the shipment interval, the order line is linked to the existing shipment. Otherwise, a new shipment is created.

Note

The field is available only when the Within Time Interval option is selected.

Update Shipping Material Account during
Update Shipping Material Account during
The field determines the stage in the supply process at which the packaging-item related transactions are updated in the shipping material accounts by LN in case of a logistical service provider (LSP) scenario. The field is enabled only for VMI warehouses in which warehouse management is not carried out by own company. The packaging-item related transactions can be updated by LN at the following points in the process:
  • Shipment to VMI Warehouse: The shipping material account must be updated during shipment of (packaging) items from the normal warehouse to the VMI warehouse.

  • Consumption by Customer: The shipping material account must be updated during shipment of (packaging) items from the VMI warehouse (Logistical Service Provider (LSP) warehouse) to the customer/OEM (Original Equipment Manufacturer).

  • Not Applicable: LN assigns this value for warehouses in which the own company is carrying out inventory management. To record the packaging item transactions, you must select the Extended Packaging Item Registration check box in the Master Data Parameters (whwmd0100s000) session.

Shipment Building
Single Picking Mission per Shipment
If this check box is selected, LN generates a separate shipment for each new picking mission if no suitable existing shipment can be found.
Note

The Single Picking Mission per Shipment option:

  • Does not apply in case of financial warehouse.

  • Does not apply in case of composing a shipment or load.

Single load for the same Ship-from Address, Carrier and Route

The shipment building engine combines multiple shipments into the same load in case the Ship-from Address, the Carrier, and the Route on these shipments are identical. This implies that no new loads are created in case the ship-to address of the (additional) shipment differs.

Note

In case the Unique Shipment Reference per Shipment criteria is selected in the Warehousing Order Types (whinh0110m000) session, the shipment interval is set based on the earliest planned delivery date and the latest planned delivery date of the corresponding outbound order lines (containing the unique reference). This criteria overrules all the other criteria, including the Single Picking Mission per Shipment, because it cannot create multiple shipments with the same shipment reference.

Example

Unique Shipment Reference per Shipment = No Single Picking Mission per Shipment = Yes
Run NumberWarehousePicking MissionShipment ReferenceShipment
1WRH011REF001SH0000001
1WRH012REF001SH0000002
1WRH013REF003SH0000003

 

Unique Shipment Reference per Shipment = Yes Single Picking Mission per Shipment = Yes
Run NumberWarehousePicking MissionShipment ReferenceShipment
1WRH011REF001SH0000001
1WRH012REF001SH0000001
1WRH013REF003SH0000002

 

Delivery Note
Delivery Note
In this field you can specify whether, or when the delivery notes must be printed for goods listed on shipments leaving the current warehouse. For more information, refer to Delivery Note.
Suppress Printing Packing Slip
Suppress Printing Packing Slip
If, according to the settings of the Transport Document field and the warehousing procedures for shipments leaving the current warehouse, both delivery notes and packing slips must be printed, you can specify in this field whether printing packing slips must be enabled or suppressed.

Any changes to these settings become effective for new outbound or shipment activities for the current warehouse. Activities that are in process while the changes are made will not be affected by the changes, these remain controlled by the previous settings.

Related topics

 

Change Location System by Warehouse
Starts the Change Location System by Warehouse (whwmd3205m000) session that allows you to initiate location control for non-location controlled warehouses.