WMS Interface Parameters (whwmd2105m000)

 

Item Specifications
Warehouse
A place for storing goods. For each warehouse, you can enter address data and data relating to its type.
Effective Date
The date and time that the parameters are valid. The parameters are valid up to the effective date of a more recent parameter setting.
Description
The description of the parameter set.
Warehouse Management System
Sets default values for the WMS parameters.

Select from:

  • SSA Warehouse Management 4000
    If set to this value, most fields will be unavailable.
  • Other
    If set to this value, all fields are available.
Lot Functionality Supported by WMS
Lots Not in Inventory
If this check box is selected, the WMS can register lots not in inventory.
Lot Selection Specific
If this check box is selected, the WMS can receive or ship one specific lot for an order line.
Lot Selection Same
If this check box is selected, the WMS can receive or ship exactly 1 lot per order line.
Serial Functionality Supported by WMS
Serials in Inventory
If this check box is selected, the WMS supports serialized items in inventory.
Serials Not in Inventory
If this check box is selected, the WMS can register serialized items not in inventory.
Inventory Functionality Supported by WMS
Handling Units
If this check box is selected, the WMS supports the handling unit concept as defined in LN.

If this check box is cleared, no handling units can be created or generated for a WMS-controlled warehouse within LN.

Inventory Commitment
If this check box is selected, the WMS supports inventory commitment.

If this check box is cleared, this does not necessarily mean that inventory commitments are not allowed in LN. Whether inventory commitments are allowed, depends on the Generate Outbound Advice in SSA ERP LN parameter setting.

Inventory Buffers
If this check box is selected, the WMS supports inventory buffers.

If this check box is cleared, this does not necessarily mean that inventory buffers are not allowed in LN. Whether inventory buffers are allowed, depends on the Generate Outbound Advice in SSA ERP LN.parameter setting.

Rejected Inventory
If this check box is selected, the WMS supports the rejected inventory concept as defined in LN.
Item Functionality Supported by WMS
Effectivity Units
If this check box is selected, the WMS supports effectivity units.

If this check box is cleared, effectivity units are not allowed on orders for WMS-controlled warehouses.

Non-physical Items
If this check box is selected, the WMS can handle non-physical items.
Inbound BOM/List Items
Indicates whether the WMS supports inventory handling by component for inbound. This means that components of a bill of material (BOM) or list item are received in a balanced way.

If this check box is cleared, inventory handling by component is not allowed on inbound order lines.

If this check box is selected, no inspections for these types of receipts can be performed.

Outbound BOM/List Items
If this check box is selected, WMS supports inventory handling by component for outbound. This means that components of a bill of material (BOM) or list item are shipped in a balanced way.

If this check box is cleared, inventory handling by component is not allowed on outbound order lines.

Manufacturer Part Numbers
If this check box is selected, the WMS supports manufacturer part numbers.
Order Specifications
Cycle Counting
Order Creation Allowed in LN
Determines for which warehouses cycle counting can be generated in the session.

If this check box is selected, a cycle counting order can be created for any WMS warehouse that is within the range of warehouses for which cycle counting orders must be generated.

If this check box is cleared, you cannot manually create and process cycle counting orders for WMS-controlled warehouses.

Order Approval Allowed in LN
Indicates whether cycle counting results can be approved in LN before processing.

If this check box is selected, counting results can always be approved in LN, even if the cycle counting order was created by the WMS.

If this check box is cleared, cycle counting results can only be approved by the WMS. However, cycle count orders created during the reconciliation process, must be approved in LN.

Block Inventory During Warehouse Cycle Counting
If this check box is selected, the WMS supports inventory blocking when LN creates cycle counting orders.
Shipping Constraint Usage Supported by WMS
Ship Line Complete
If this check box is selected, the WMS can force shipping complete order lines.
Ship Set Complete
If this check box is selected, the WMS can force shipping complete sets of order lines.
Ship Order Complete
If this check box is selected, the WMS can force shipping complete orders.
Unit is Binding
If this check box is selected, LN can force the WMS to ship specific units.
Reconciliation
Reason
Indicates the reason that must be used for registering reconciliation results in LN. The reason code, which must be of type Cycle Counting, is shown in the Cycle Counting Order Lines (whinh5101m000) session.
Order Creation Allowed in LN
Determines whether reconciliation orders can be generated.

If this check box is selected, the Reconciliation check box in the Generate Cycle Counting Orders (whinh5200m000) session will be available.

If this check box is cleared, WMS-controlled warehouses are skipped.

Order Type Functionality Supported by WMS
Collect Orders
If this check box is selected, the WMS can handle collect orders.
Cross-docking
If this check box is selected, the WMS supports the cross-docking concept as defined in LN.

If this check box is cleared, no cross-dock orders can be created or generated for a WMS-controlled warehouse within LN.

WMS Process
WMS Process
WMS Supports Same Item on Multiple Inbound Order Lines
If this check box is selected, the WMS can handle multiple inbound lines for the same item within one advance shipment notice.
Note

SSA Warehouse Management 4000 cannot handle multiple inbound lines for the same item within one ASN. This means that during receiving in WM 4000 using RF, only the first line containing the specified item is updated. Other lines containing the same item are ignored. This results in an overdelivery for the first line and back orders for the other lines.

Receipts Creation Allowed in LN
If this check box is selected, receipts can be created in LN for WMS-related order lines that are sent to the WMS.

If this check box is cleared, you cannot link order lines to a receipt for a WMS-controlled warehouse. However, if order lines contain non-physical items and the Non-physical Items check box is cleared also, you can still link these specific order lines to a receipt for a WMS-controlled warehouse.

WMS Supports Minimum Tolerance when Receiving
If this check box is selected, the WMS can handle minimum tolerance constraints during receiving.
Note

SSA Warehouse Management 4000 cannot handle minimum tolerance constraints during receiving.. As a result, final receipt can only be set in LN automatically if the received quantity is greater than or equal to the ordered quantity.

Generate Outbound Advice in LN
If this check box is selected, LN generates and sends outbound advice to the WMS instead of just sending outbound order lines.
Integrations Supported by WMS
Freight Management
If this check box is selected, the WMS can work together with LN Freight.

If this check box is cleared, no freight orders can be created for order lines related to a WMS-controlled warehouse. However, one exception exists: If Generate Outbound Advice in SSA ERP LN is selected, freight orders can still be created in LN, because this allows Freight to do a load planning before orders are sent to the WMS. In this case, the orders that are sent to the WMS are in line with Freight, without requiring a direct interface between the WMS and Freight.

Quality Management
If this check box is selected, the WMS can work together with LN Quality.
Reasons
Receipt Correction
Indicates the reason that must be used for the creation of adjustment orders due to receipt corrections.
Inspection Change
Indicates the reason that must be used for the creation of adjustment orders due to rejections for inspections that could not created anymore in LN.

This can apply to, for example, receipts for production orders that do not require inspections in LN, but are inspected in WM 4000 instead.

 

Print WMS Interface Parameters
Starts the Print WMS Interface Parameters (whwmd2405m000) session.