Route pre-selection can have a complicated setup and it is important to test that the logic and basic data are correct. The purpose of this program is to give the user a good tool for tests and simulation of route pre-selection.
MTS028 is used for testing DRRTVRDE.
Settings for route pre-selections are done as specified in Define Settings for Transportation Management.
The purpose of this program is to give the user a good tool for tests and simulation of route pre-selection.
Date type (D4DTTP mandatory):
Tells DRRTVRDE what date/time to use as a starting point for the calculation.
Place of load (D4SDES mandatory):
You must enter at least one of these requested dates/times based on what date type you have entered:
Fill in the following fields: DRRTVOBJ, Customer (D8CUNO), Address number (D8ADID), Delivery day number (D8DEWD), From warehouse (D8FWLO), To warehouse (D8TWLO) or Place of unloading (D8EDES mandatory if route type is 2, 3, 4 or 5). This is also used to find a route pre-selection in (DRS011), so one or more values must be entered.
Example of route pre-selection setup in DRS011:
Enter the place of loading, requested delivery date/time (based on using date type 3), requested delivery/date time (D4DWDT/D4DWHM), customer number and place of unloading. This should produce the same result as entering a customer order line for customer 7500, from warehouse 001, with requested delivery date 20050127 16:00.
The result of the route pre-selection and the date calculations is presented at the bottom of the panel.
You can use the different dates/times together with the lead times presented to check the date calculation.
If you have a customer or distribution order line, you can use the data from the order as a template instead of entering basic data yourself.