Create system configuration

This section describes the steps to take in order to create a system configuration and connect it to up to four system components.

  1. Right-click the environment and select Environment Configurator.
  2. Click on the Configurations pane located in the lower left hand part of the window.
  3. Click the plus icon in the upper right hand part of the window Environment Configurator. The window New System Configuration window is displayed.
  4. Enter a name for the System configuration and click OK.
  5. Enter a description for the configuration in the Description field.
  6. Select the newly created component from the Components drop-down list.
    Note: 

    The components must be defined in the order (from top to bottom): customer modification, market modification, standard base (MVX).

  7. Click the save icon in the upper right hand part of the Environment Configurator window.
  8. Depending on the environment status:
    • If the environment is running, the message "Set M3 BE in maintenance mode" is displayed. Click OK to save the new configuration.

    • If the environment is stopped, the environment is started in maintenance mode and the new configuration is saved.

      Note: 

      The environment is in maintenance mode until the application is started, or set online.