Processing Putaway Transaction Parameters: Report

This screen is used to report putaway for balance IDs.

To configure parameters for this screen, select the check box next to the screen name:

Note: If you do not specify a parameter value, or you specify an invalid value, the default value will be used.

Specify this information:

Auto confirm input field data

Use this parameter to specify whether the user must scan field values to confirm them, or if those values are automatically confirmed. These are the values for each field:

1: Quantity
2: To location

You can specify these parameter values for each field:

A: The user must confirm the value by scanning it.
B: The value is automatically confirmed.
C: If the suggested value is not blank, the value is automatically confirmed.
D: If the suggested value is blank, the value is automatically confirmed.

Specify a behavior for each field using this format: (field value)=(parameter value). For example, 1=A. To specify values for multiple fields, separate them using semicolons. For example, 1=B;2=A.

Note: If no values are suggested for a mandatory field, the user must scan a value regardless of how this parameter is configured.

The default value for this parameter is 1=A;2=A.

Auto trigger Next when all fields confirmed

Use this parameter to automatically process the information on this screen when all input fields have been confirmed. You can specify these parameter values:

0: The user must manually select Next to process information.
1: Information is automatically processed when all input fields have been confirmed.

An example value for this parameter is 1. The default value is 0.

Sequence of input fields

Use this parameter to specify the sequence in which fields are displayed on this screen. These are the values for each field:

1: Quantity (input field)
2: To Location (input field)
3: Item (information field)
4: Lot (information field)
5: Container (information field)
6: Catch Wt (input field)

Specify the sequence by separating each value with a semicolon. For example, 1;5;2;3. Information field values that you do not include in the sequence will not be displayed. You must specify a value for all input fields.

The default value for this parameter is 3;4;5;1;2.

Suggested data for To Location input field

Use this parameter to specify whether to suggest values for the To Location field. You can specify any location, you can leave this blank, or you can specify *SYS to use M3's putaway logic to suggest a location.

An example value for this parameter is PUTAWAY. The default value is *SYS.

Verify input field suggested data

Use this parameter to specify whether values scanned in fields must match the suggested values. These are the values for each field:

1: Quantity
2: To location

You can specify these parameter values for each field:

A: The user can scan any value, and it will not be verified against the suggested value.
B: The user can scan any value, but they will be warned if it does not match the suggested value.
C: The user can scan any value, but they will be warned if it is higher than the suggested value.
D: The user can scan any value, but they will be warned if it is lower than the suggested value.
E: The scanned value must match the suggested value.
F: The scanned value cannot be higher than the suggested value.
G: The scanned value cannot be lower than the suggested value.
H: The scanned value cannot be lower than the suggested value, and the user will be warned if the scanned value is higher than the suggested value.
I: The scanned value cannot be higher than the suggested value, and the user will be warned if the scanned value is lower than the suggested value.

Specify a behavior for each field using this format: (field value)=(parameter value). For example, 1=A. To specify values for multiple fields, separate them using semicolons. For example, 1=F;2=B.

Note: Only values A, B, and E are applicable to the To Location field.

The default value for this parameter is 1=A;2=A.