Package Repack Transaction

You can use the Package Repack transaction to:

  • Search for the delivery packages
  • List package contents
  • Move balance ID (or part of ID) to new or existing package
  • Transfer all contents from a package to new or existing package
  • List connected packages (packages on same delivery)
  • Unpack package
  • Print package label

See Configuring Package Repack Transaction parameters, for more information about configuring this transaction.

This transaction is comprises of these screens:

Search packages screen

Use this screen to search delivery packages by scanning the delivery or a package on the delivery.

Search package screen parameters

Parameter Name Values Example Default Value
Auto trigger Next when all fields confirmed

0: No

1: Yes

1 0
Sequence of input fields

1: Search

2: Package

3: Delivery

3;1 1;2;3
Note:  If you do not specify a value for the parameter, or you specify an invalid value, the default value is used.

List packages screen

Use this screen to list delivery packages according to search on search screen. If package number is part of the search, the list can display either that package only or all packages on the same delivery.

List packages screen parameters

Parameter Name Values Example Default Value
Action when pressing Select

0: Select button is not available (screen is for info only).

1: Display Package Contents screen.

2: Display Move All screen.

3: Display Package Update screen.

For option 3 a specific Package Update transaction profile can be set using parameter “Enable option to update package” in the Package Contents screen. Set the “Enable option to update package” parameter in format “N;PROFILE ID” where N = 1. If no profile is set it will use the default Package Update profile.

2 1
Auto select first record

0: No

1: Yes - always

2: Yes - if only one record is listed. Also applies after filtering.

2 0
Auto trigger PRT ALL

0: No

1: Yes

This parameter takes preference over Auto select first record

This parameter is not dependent on Enable option to print all package labels

1 0
Enable option to auto refresh list

0=No. No auto refresh. Manual refresh only (function button).

1=Yes. Auto refresh. Manual refresh possible (function button).

2=Yes. Auto refresh only.

If set to 0: A function button (Refresh) will be displayed that will trigger a refresh of the list. The new package will not be displayed on the list unless list is refreshed.

If set to 1: A function button (Refresh) will be displayed and refresh will be automatically triggered when list is displayed after reporting. Refresh will not be automatically triggered when list is displayed after pressing Back from a subsequent screen.

If set to 2: No function button (Refresh) will be displayed. Refresh will be automatically triggered when list is displayed after reporting. Refresh will not be automatically triggered when list is displayed after pressing Back from a subsequent screen

Note:  This parameter is only applicable after moving all contents from one package to another in the Move All screen. This parameter is not applicable after moving in the Move Item screen and Unpack All.
1 2
Enable option to print all package labels

0: No

1: Yes

If set to 1: PRT ALL is displayed and initiates printing of package label for all packages in the list.

For option 1 a specific Print Package Label transaction profile can be set by using the format “N;PROFILE NAME” where N = 1.

If no profile is set it uses the default profile Print Package Label.

1;PRINT PROFILE A 1
List all delivery packages

0: No. The screen displays only the scanned package.

1:Yes. The screen displays all the packages that are part of the same delivery as the scanned package.

Note: 
  • If package is part of the search criteria on the search screen this parameter controls if only the scanned package must be displayed or if all packages on the same delivery are listed.
  • Always highlights the scanned package.
1 0
List lowest level packages only

0: No. The screen lists all the packages that are part of the delivery.

1: Yes. The screen lists only the packages that are not included in any other package.

1 0
Package picking status to include Any numeric (multi)

40;50;60;65;70;90

50;60 Blank (all statuses included)
Sorting Order

Set max 10 fields to sort by in the format N=X; N=X etc.

N = field number and X = either A for ascending or D for descending.

Logic:

A. Ascending

D. Descending

Fields:

MWS423MI.LstPackDel

1. Location (WHSL)

2. Packag (PANR)

3. SSCC (SSCC)

4Packaging (PACT)

5Weight (GRWE)

6Volume (VOL3)

7Sort value (SORT)

8Entry date (RGDT)

9Entry time (RGTM)

5=D;6=D;1=A;2=A 2=A;1=A
Note:  If you do not specify a value for the parameter, or you specify an invalid value, the default value is used.

Package contents screen

This screen lists the contents of the selected delivery package.

Buttons can be configured to display two or more options by displaying OPTIONS button in the screen, or can be configured to display only PRINT or MOVE ALL or UNPACK ALL as a button.

Package contents screen parameters

Parameter Name Values Example Default Value
Action when pressing next

0: Display as an information screen. Next button is not available.

1: Display Move Item screen

0 1
Auto select first record

0: No

1: Yes - always

2: Yes - if only one record is listed. Also applies after filtering.

2 0
Delete From package when empty

0: No

1: Yes
Note: This parameter controls if package must be deleted after being unpacked using option UNPACK ALL.
0 1
Enable option to move entire contents

0: No. Option MOVE ALL is not available.

1: Yes. Option MOVE ALL is available.

If set to 1, you can click the MOVE ALL button to view the Move All screen in which all the contents of the package can be moved to a new or other packages.

0 1
Enable option to print package label

0: No. Option PRINT is not available.

1: Yes. Option PRINT is available.

If set to 1, you can click PRINT button to view the Print Package Label screen for printing package label of the current package.

Note:  For option 1, a specific PRINT PACKAGE LABEL transaction profile can be set using the N;PROFILE ID format where N=1. If profile is not set, the default profile PRINT PACKAGE LABEL is used. Note that this parameter is configured using the profile ID (not the profile name).
1;PRINT PROFILE A 1
Enable option to unpack package

0: No. Option UNPACK ALL is not available.

1: Yes. Option UNPACK ALL is available.

If set to 1, you can click UNPACK ALL button to unpack all lines from current package. A warning message is displayed before unpacking the package.

0 1
Enable option to update package

0=No

1=Yes

If set to 1: Function button UPDATE PKG is available that will open Update screen of transaction Package Update

For option 1 a specific Package Update transaction profile can be set by using format “N;PROFILE ID” where N = 1. If no profile is set it will use the default profile.

1;PROFILE ID X 0
Sequence of options

1. Move All

2. Print

3. Unpack All

4. Update Package

If an option is active but not set in this parameter, it will still display but last in the list.

4;3;1;2 1;2;3
Note:  If you do not specify a value for the parameter, or you specify an invalid value, the default value is used.

Move item screen

Use this screen to move an item to a new package or an existing package in a location.

Move item screen parameters

Parameter Name Values Example Default Value
Auto confirm input field data

Input fields:

1: Quantity

2: To Package

3: Packaging

The user can specify these values for the input fields:

A: No. The user must confirm the value either by scanning or by entering the data manually.

B: Yes. The value is confirmed automatically.

C: Yes. The value is confirmed automatically, if the suggested data is not Blank.

D: Yes. The value is confirmed automatically, if the suggested data is Blank.

1=B;2=A;3=C 1=A;2=A;3=A
Auto trigger Next when all fields confirmed

0: No

1: Yes

1 0
Package label print (To Package)

0: No print

1: Prompt to print label when a new To Package is created.

Note:  For option 1, a specific PRINT PACKAGE LABEL transaction profile can be set by using N;PROFILE ID format where N=1. If profile is not set, the default profile PRINT PACKAGE LABEL is used. Note that this parameter is configured using the profile ID (not the profile name).
1;PRINT PROFILE A 1
Numeric keypad - Activate negative sign

1: Quantity

A: No

B: Yes

1=A 1=A
Numeric keypad– Enable

1: Quantity

A: No

B: Yes

C: Yes, auto display

1=A 1=B
Populate scan field with suggested data

1: Quantity

2: To Package

3: Packaging

1;2;3 Blank
Sequence of input fields

Info fields:

1: Item

2: Lot

3: Container

Input fields:

4: Quantity

5: To Package

6: Packaging

1;6;5;4;2;3 1;2;3;4;5;6
Suggest data for input field Packaging Any packaging BOX Blank
Suggest data for input field Quantity

Any quantity

A: Total quantity in the package

A Blank
Suggest data for input field To Package

Any package

*AUTO*

*AUTO* Blank
Verify input field suggested data

Input fields:

1: Quantity

2: To Package

3: Packaging

Use this option values:

A: No. The scanned value is not verified against the suggested value.

B: Yes. A warning message is displayed if the scanned value does not match the suggested value.

C: Yes. A warning message is displayed if the scanned value is greater than the suggested value.

D: Yes. A warning message is displayed if the scanned value is less than the suggested value.

E: Yes. The scanned value must match the suggested value.

F: Yes. The scanned value cannot be greater than the suggested value.

G: Yes. The scanned value cannot be less than the suggested value.

H: Yes. The scanned value cannot be less than the suggested value. A warning message is displayed if the scanned value is greater than the suggested value.

I: Yes. The scanned value cannot be greater than the suggested value. A warning message is displayed if the scanned value is less than the suggested value.

Note: 
  • If data is not specified, the value A is defaulted.
  • Values C, D, F, G, H and I are only applicable for numeric input fields.
1=D;2=A;3=E 1=A;2=A;3=A
Note:  If you do not specify a value for the parameter, or you specify an invalid value, the default value is used.

Move all screen

Use this screen to move all items to a new or existing package.

Move all screen parameters

Parameter Name Values Example Default Value
Auto confirm input field data

Input fields:

1: To Package

2: Packaging

The user can specify these values for the input fields:

A: No. The user must confirm the value either by scanning or by entering the data manually.

B: Yes. The value is confirmed automatically.

C: Yes. The value is confirmed automatically, if the suggested data is not Blank.

D: Yes. The value is confirmed automatically, if the suggested data is Blank.

1=B;2=A 1=A;2=A
Auto trigger Next when all fields confirmed

0: No

1: Yes

1 0
Package label print (To Package)

0: No print

1: Prompt to print label when a new To Package is created.

Note:  For option 1, a specific PRINT PACKAGE LABEL transaction profile can be set by using N;PROFILE ID format where N=1. If profile is not set, the default profile PRINT PACKAGE LABEL is used.
1;PRINT PROFILE A 1
Populate scan field with suggested data

1: To Package

2: Packaging

1;2 Blank
Sequence of input fields

1: To Package

2: Packaging

2;1 1;2
Suggest data for input field Packaging

Any packaging

BOX Blank
Suggest data for input field To Package

Any package

*AUTO*

*AUTO* Blank
Verify input field suggested data

Input fields:

1: To Package

2: Packaging

Use this option values:

A: No. The scanned value is not verified against the suggested value.

B: Yes. A warning message is displayed if the scanned value does not match the suggested value.

C: Yes. A warning message is displayed if the scanned value is greater than the suggested value.

D: Yes. A warning message is displayed if the scanned value is less than the suggested value.

E: Yes. The scanned value must match the suggested value.

F: Yes. The scanned value cannot be greater than the suggested value.

G: Yes. The scanned value cannot be less than the suggested value.

H: Yes. The scanned value cannot be less than the suggested value. A warning message is displayed if the scanned value is greater than the suggested value.

I: Yes. The scanned value cannot be greater than the suggested value. A warning message is displayed if the scanned value is less than the suggested value.

Note: 
  • If no data is suggested, the value A is defaulted.
  • Values C, D, F, G, H and I are only applicable for numeric input fields.
1=A;2=E 1=A;2=A
Note:  If you do not specify a value for the parameter, or you specify an invalid value, the default value is used.