Move

Parameter Name	Values	Example	Default Value
Auto confirm input field data	1: Warehouse 2: From Location 3: Item 4: Lot 5: Container 6: Quantity 7: Catch Wt 8: To Location 9: To Container A: No. Require confirm by scan/enter data. B: Yes. Always auto confirm field. C: Yes. Auto confirm field if suggested data = NOT blank. D: Yes. Auto confirm field if suggested data is blank. E: Yes. Auto confirm field if suggested data is not blank. Set input field as info field (user cannot change the value and browse is not available) Note: Mandatory field with blank suggested data cannot be auto confirmed. This is required input regardless of this setting. If set to E: Parameter Remember input field data is not applicable for the input field with setting E. Balance ID browse If balance ID was selected after a balance ID browse: The fields From Location, Item, Lot and Container are auto confirmed. Field Quantity is suggested and can be auto confirmed or not based on parameter Balance ID browse - Auto confirm input field Quantity.	1=B;6=B	1=A;2=A;3=A;4=A;5=A 6=A;7=A;8=A;9=A
Auto trigger BROWSE	1: From Location 2: Item 3: Lot 4: Container Controls for what fields browse is auto triggered when non-confirmed input field is selected/highlighted For From Location (1), Item (2), Lot (3) and Container (4): Browse is possible if all of the following are true: Parameter Enable option to browse balance identities = 1 Input field Warehouse and at least one of input fields From Location, Item, Lot, or Container are confirmed (with data <> blank).	1;3	Blank
Auto trigger CREATE PKG	0: No 1: Yes If set to 1:Auto triggers option CREATE PKG. This parameter is not dependent on the Enable option to create package in stock parameter.	1	0
Balance ID browse - Auto confirm input field Quantity	0: No 1: Yes If set to 1: If balance ID was selected after browsing balance IDs then the quantity from the selected balance ID is auto confirmed	1	0
Display item description	0: No 1: Yes If set to 1: An extra line with item description is displayed below the item name. If item description is blank the extra line is not displayed. Extra spaces in the item description are removed leaving only single spaces. E.g. "Cotton /Color 3 /Large" is displayed as "Cotton /Color 3 /Large" This parameter is only available for M3 16+ This parameter is only applicable if a balance ID is selected after a balance ID browse.	1	0
Enable option to browse balance identities	0: No 1: Yes If set to 1: If input field Warehouse and at least one of input fields From Location, Item, Lot, or Container are confirmed (with data <> blank): Click BROWSE on the fields From Location, Item, Lot and Container and to open List Balance ID screen of transaction Stock Enquiry. Already confirmed input fields (From Location, Item, Lot, Container) are used as filters when listing the balance identities After selecting a balance ID in the List Balance ID screen: Input fields From Location, Item, Lot and Container are auto confirmed with data from the selected balance ID Input field Quantity is suggested and may be auto confirmed or not based on parameter Balance ID browse - Auto confirm input field Quantity (unless Quantity was already confirmed when browse was triggered, in which case the Quantity input field it is not changed) Input fields Lot and Container are confirmed with blank if balance ID data is blank A specific Stock Enquiry transaction profile can be set by using format 1;PROFILE ID. If no profile is set it uses the default profile.	1;PROFILE ID X	0
Enable option to create package in stock	0: No 1: Yes 2: Yes. Suggest package (Always) 3: Yes. Auto confirm package (Always) 4: Yes. Suggest package (If package not confirmed) 5: Yes. Auto confirm package (If package not confirmed) If set to 1, 2, 3, 4 or 5: Function button CREATE PKG is available. Using function button CREATE PKG opens the Create Package in Stock screen with warehouse from current screen defaulted In the Create Package in Stock screen one or multiple packages in stock can be created If set to 2: If one single package is created in the Create Package In Stock screen: Input field To Container in the Move screen is suggested with the newly created package. This overrides any To Container that is already suggested or confirmed. If set to 3: If one single package is created in the Create Package In Stock screen: Input field To Container in the Move screen is auto confirmed with the newly created package. This overrides any To Container that is already suggested or confirmed. If set to 4: Same as 2 but if To Container is already confirmed it is not changed. If set to 5: Same as 3 but if To Container is already confirmed it is not changed.	1	0
Mandatory input fields	1: Warehouse 2: From Location 3: Item 4: Lot 5: Container 6: Quantity 7: Catch Wt 8: To Location 9: To Container	1;4;3	Blank (not mandatory)
Numeric keypad - activate negative sign	1: Quantity 2: Catch Wt A: No B: Yes	1=B;2=B	1=A;2=A
Numeric keypad - enable	1: Quantity 2: Catch Wt A: No B: Yes C: Yes and auto display when field is selected.	1=C;2=B	1=B; 2=B
Populate scan field with suggested data	1: Warehouse 2: From Location 3: Item 4: Lot 5: Container 6: Quantity 7: Catch Wt 8: To Location 9: To Container	1;2;8	Blank
Remember input field data	1: Warehouse 2: From Location 3: Item 4: Lot 5: Container 6: Quantity 7: Catch Wt 8: To Location 9: To Container A: Yes. Until exit transaction or reset. Auto confirm C: Yes. Until exit transaction or reset. No auto confirm This parameter is not applicable for any field with setting E in Auto confirm input field data parameter.	1=A;2=C;6=A	Blank (nothing remembered)
Sequence of input fields	Input: 1: Warehouse 2: From Location 3: Item 4: Lot 5: Container 6: Quantity 7: Catch Wt 8: To Location 9: To Container Info: 10: Transaction status Field transaction status (10): Only displayed for existing transactions in status Error or Pending	2;3;4;6;8	1;2;3;4;5 6;7;8;9;10
Suggest data for input field Catch Weight	Any catch weight CUR (current catch weight balance ID) CUR option is only applicable when: Balance ID is selected after browsing balance IDs The Suggest data for input field Quantity parameter is set to A (Total on-hand). Input field Quantity is not confirmed with quantity different from Total on-hand when browse balance ID is triggered.	1 or *CUR	Blank
Suggest data for input field Container	Any container	SAH208	Blank
Suggest data for input field From Location	Any location	A1-03-02	Blank
Suggest data for input field Item	Any item	ABC123	Blank
Suggest data for input field Lot	Any lot	HOD231	Blank
Suggest data for input field Quantity	Any quantity A: Total on-hand balance B: Allocatable (On-hand balance - allocated qty) C: Movable (On-hand balance - pick list qty - pending putaway qty) The A, B and C options are only applicable when: Balance ID is selected after browsing balance IDs	1	Blank
Suggest data for input field To Container	Any container	UMD930	Blank
Suggest data for input field To Location	Any location	B3-43-12	Blank
Suggest data for input field Warehouse	Any warehouse USER (warehouse from user settings) This parameter is only applicable if input field Warehouse is set to be displayed using parameter “Sequence of input fields”, or it work as it is set to USER.	001 or *USER	Blank
Verify input field suggested data	1: Warehouse 2: From Location 3: Item 4: Lot 5: Container 6: Quantity 7: Catch Wt 8: To Location 9: To Container A: No. No check if match B: Yes. Warn if not match C: Yes. Warn if value higher D: Yes. Warn if value lower E: Yes. Error if not match F: Yes. Error if value higher G: Yes. Error if value lower H: Yes. Error if value lower, warn if value higher I: Yes. Error if value higher, warn if value lower Note: If suggested data is blank then all work like A.	2=B;6=H;8=E	1=A;2=A;3=A;4=A;5=A; 6=A;7=A;8=A;9=A

Auto confirm input field data

1: Warehouse

2: From Location

3: Item

4: Lot

5: Container

6: Quantity

7: Catch Wt

8: To Location

9: To Container

A: No. Require confirm by scan/enter data.

B: Yes. Always auto confirm field.

C: Yes. Auto confirm field if suggested data = NOT blank.

D: Yes. Auto confirm field if suggested data is blank.

E: Yes. Auto confirm field if suggested data is not blank. Set input field as info field (user cannot change the value and browse is not available)

Note: Mandatory field with blank suggested data cannot be auto confirmed. This is required input regardless of this setting.

If set to E: Parameter Remember input field data is not applicable for the input field with setting E.

Balance ID browse

If balance ID was selected after a balance ID browse:

The fields From Location, Item, Lot and Container are auto confirmed.
Field Quantity is suggested and can be auto confirmed or not based on parameter Balance ID browse - Auto confirm input field Quantity.

1=B;6=B

1=A;2=A;3=A;4=A;5=A

6=A;7=A;8=A;9=A

Auto trigger BROWSE

1: From Location

2: Item

3: Lot

4: Container

Controls for what fields browse is auto triggered when non-confirmed input field is selected/highlighted

For From Location (1), Item (2), Lot (3) and Container (4):

Browse is possible if all of the following are true:

Parameter Enable option to browse balance identities = 1
Input field Warehouse and at least one of input fields From Location, Item, Lot, or Container are confirmed (with data <> blank).

1;3

Blank

Auto trigger CREATE PKG

0: No

1: Yes

If set to 1:Auto triggers option CREATE PKG.

This parameter is not dependent on the Enable option to create package in stock parameter.

1

0

Balance ID browse - Auto confirm input field Quantity

0: No

1: Yes

If set to 1: If balance ID was selected after browsing balance IDs then the quantity from the selected balance ID is auto confirmed

1

0

Display item description

0: No

1: Yes

If set to 1:

An extra line with item description is displayed below the item name.
If item description is blank the extra line is not displayed.
Extra spaces in the item description are removed leaving only single spaces. E.g. "Cotton /Color 3 /Large" is displayed as "Cotton /Color 3 /Large"

This parameter is only available for M3 16+

This parameter is only applicable if a balance ID is selected after a balance ID browse.

1

0

Enable option to browse balance identities

0: No

1: Yes

If set to 1:

If input field Warehouse and at least one of input fields From Location, Item, Lot, or Container are confirmed (with data <> blank):
Click BROWSE on the fields From Location, Item, Lot and Container and to open List Balance ID screen of transaction Stock Enquiry.
Already confirmed input fields (From Location, Item, Lot, Container) are used as filters when listing the balance identities
After selecting a balance ID in the List Balance ID screen:
- Input fields From Location, Item, Lot and Container are auto confirmed with data from the selected balance ID
- Input field Quantity is suggested and may be auto confirmed or not based on parameter Balance ID browse - Auto confirm input field Quantity (unless Quantity was already confirmed when browse was triggered, in which case the Quantity input field it is not changed)
- Input fields Lot and Container are confirmed with blank if balance ID data is blank
A specific Stock Enquiry transaction profile can be set by using format 1;PROFILE ID. If no profile is set it uses the default profile.

1;PROFILE ID X

0

Enable option to create package in stock

0: No

1: Yes

2: Yes. Suggest package (Always)

3: Yes. Auto confirm package (Always)

4: Yes. Suggest package (If package not confirmed)

5: Yes. Auto confirm package (If package not confirmed)

If set to 1, 2, 3, 4 or 5:

Function button CREATE PKG is available.
Using function button CREATE PKG opens the Create Package in Stock screen with warehouse from current screen defaulted
In the Create Package in Stock screen one or multiple packages in stock can be created

If set to 2: If one single package is created in the Create Package In Stock screen: Input field To Container in the Move screen is suggested with the newly created package. This overrides any To Container that is already suggested or confirmed.

If set to 3: If one single package is created in the Create Package In Stock screen: Input field To Container in the Move screen is auto confirmed with the newly created package. This overrides any To Container that is already suggested or confirmed.

If set to 4: Same as 2 but if To Container is already confirmed it is not changed.

If set to 5: Same as 3 but if To Container is already confirmed it is not changed.

1

0

Mandatory input fields

1: Warehouse

2: From Location

3: Item

4: Lot

5: Container

6: Quantity

7: Catch Wt

8: To Location

9: To Container

1;4;3

Blank (not mandatory)

Numeric keypad - activate negative sign

1: Quantity

2: Catch Wt

A: No

B: Yes

1=B;2=B

1=A;2=A

Numeric keypad - enable

1: Quantity

2: Catch Wt

A: No

B: Yes

C: Yes and auto display when field is selected.

1=C;2=B

1=B; 2=B

Populate scan field with suggested data

1: Warehouse

2: From Location

3: Item

4: Lot

5: Container

6: Quantity

7: Catch Wt

8: To Location

9: To Container

1;2;8

Blank

Remember input field data

1: Warehouse

2: From Location

3: Item

4: Lot

5: Container

6: Quantity

7: Catch Wt

8: To Location

9: To Container

A: Yes. Until exit transaction or reset. Auto confirm

C: Yes. Until exit transaction or reset. No auto confirm

This parameter is not applicable for any field with setting E in Auto confirm input field data parameter.

1=A;2=C;6=A

Blank (nothing remembered)

Sequence of input fields

Input:

1: Warehouse

2: From Location

3: Item

4: Lot

5: Container

6: Quantity

7: Catch Wt

8: To Location

9: To Container

Info:

10: Transaction status

Field transaction status (10): Only displayed for existing transactions in status Error or Pending

2;3;4;6;8

1;2;3;4;5

6;7;8;9;10

Suggest data for input field Catch Weight

Any catch weight

*CUR (current catch weight balance ID)

*CUR option is only applicable when:

Balance ID is selected after browsing balance IDs
The Suggest data for input field Quantity parameter is set to A (Total on-hand).
Input field Quantity is not confirmed with quantity different from Total on-hand when browse balance ID is triggered.

1 or *CUR

Blank

Suggest data for input field Container

Any container

SAH208

Blank

Suggest data for input field From Location

Any location

A1-03-02

Blank

Suggest data for input field Item

Any item

ABC123

Blank

Suggest data for input field Lot

Any lot

HOD231

Blank

Suggest data for input field Quantity

Any quantity

A: Total on-hand balance

B: Allocatable (On-hand balance - allocated qty)

C: Movable (On-hand balance - pick list qty - pending putaway qty)

The A, B and C options are only applicable when: Balance ID is selected after browsing balance IDs

1

Blank

Suggest data for input field To Container

Any container

UMD930

Blank

Suggest data for input field To Location

Any location

B3-43-12

Blank

Suggest data for input field Warehouse

Any warehouse

*USER (warehouse from user settings)

This parameter is only applicable if input field Warehouse is set to be displayed using parameter “Sequence of input fields”, or it work as it is set to *USER.

001 or *USER

Blank

Verify input field suggested data

1: Warehouse

2: From Location

3: Item

4: Lot

5: Container

6: Quantity

7: Catch Wt

8: To Location

9: To Container

A: No. No check if match

B: Yes. Warn if not match

C: Yes. Warn if value higher

D: Yes. Warn if value lower

E: Yes. Error if not match

F: Yes. Error if value higher

G: Yes. Error if value lower

H: Yes. Error if value lower, warn if value higher

I: Yes. Error if value higher, warn if value lower

Note: If suggested data is blank then all work like A.

2=B;6=H;8=E

1=A;2=A;3=A;4=A;5=A;

6=A;7=A;8=A;9=A