Inspecting Transaction Parameters: Report

This screen is used to approve or reject balance IDs.

To configure parameters for this screen, select the check box next to the screen name:
Note: If you do not specify a parameter value, or you specify an invalid value, the default value will be used.
Specify this information:
Auto confirm input field data
Use this parameter to specify whether the user must scan field values to confirm them, or if those values are automatically confirmed. These are the values for each field:
  • 1: Action
  • 2: Quantity
  • 3: To location
  • 4: Reject reason

You can specify these parameter values for each field:

  • A: The user must confirm the value by scanning it.
  • B: The value is automatically confirmed.
  • C: If the suggested value is not blank, the value is automatically confirmed.
  • D: If the suggested value is blank, the value is automatically confirmed.
Specify a behavior for each field using this format: (field value)=(parameter value). For example, 1=A. To specify values for multiple fields, separate them using semicolons. For example, 1=B;2=A;3=A;4=B.
Note: If no values are suggested for a mandatory field, the user must scan a value regardless of how this parameter is configured.

The default value for this parameter is 1=A;2=A;3=A.

Auto trigger Next when all fields confirmed
Use this parameter to automatically process the information on this screen when all input fields have been confirmed. You can specify these parameter values:
  • 0: The user must manually select Next to process information.
  • 1: Information is automatically processed when all input fields have been confirmed.

An example value for this parameter is 1. The default value is 0.

Sequence of input fields
Use this parameter to specify the sequence in which fields are displayed on this screen. These are the values for each field:
  • 1: Action (input field)
  • 2: Quantity (input field)
  • 3: To Location (input field)
  • 4: Reject reason (input field)
  • 5: Item (information field)
  • 6: Lot (information field)
  • 7: Container (information field)

Specify the sequence by separating each value with a semicolon. For example, 1;4;6;2;3. Information field values that you do not include in the sequence will not be displayed. You must specify a value for all input fields.

The default value for this parameter is 1;5;6;7;4;2;3.

Suggest data for input field Action
Use this parameter to specify a default value for the Action field.  You can specify APPROVE or REJECT, or you can leave this field blank.

An example value for this parameter is APPROVE. The default value is blank.

Suggest data for input field Rejection reason
Use this parameter to specify a default value for the Reject Reason field.  You can specify any reject reason code, or you can leave this field blank.

An example value for this parameter is BQ. The default value is blank.

Suggest data for input field To location
Use this parameter to specify a default for the To Location field. You can specify any location, you can leave this blank, or you can specify *SYS to use M3's putaway logic to suggest a location.

An example value for this parameter is INSPECTED. The default value is *SYS.

Verify input field suggested data
Use this parameter to specify whether values scanned in fields must match the suggested values. These are the values for each field:
  • 1: Quantity
  • 2: To location

You can specify these parameter values for each field:

  • A: The user can scan any value, and it will not be verified against the suggested value.
  • B: The user can scan any value, but they will be warned if it does not match the suggested value.
  • C: The user can scan any value, but they will be warned if it is higher than the suggested value.
  • D: The user can scan any value, but they will be warned if it is lower than the suggested value.
  • E: The scanned value must match the suggested value.
  • F: The scanned value cannot be higher than the suggested value.
  • G: The scanned value cannot be lower than the suggested value.
  • H: The scanned value cannot be lower than the suggested value, and the user will be warned if the scanned value is higher than the suggested value.
  • I: The scanned value cannot be higher than the suggested value, and the user will be warned if the scanned value is lower than the suggested value.
Specify a behavior for each field using this format: (field value)=(parameter value). For example, 1=A. To specify values for multiple fields, separate them using semicolons. For example, 1=F;2=B.
Note: 
  • If the suggested value is blank, the user can scan any value without a warning regardless of how this parameter is configured.
  • Only values A, B, and E are applicable to the To Location field. The default value for this parameter is 1=A;2=A.